Warehouse Clearance - Now closes 14th & 15th October

CSC Terruggia 2000 Litre Air Receiver

2000 Litre air receiver made at CSC Terruggia, Italy. Pressure testing will be required before use.

Lot ID: AE202

Gardner Denver Variable Speed Heavy Duty Industrial Air Compressor

The Gardener Denver VS series of enclosed regulated speed compressors provide a variable speed offering in a compact enclosed format. Last serviced August 2018 (see report attached) Run Hours 73948.

Lot ID: AY178J

ABB Bonfiglioli W Series Motor Gearbox

Bonfiglioli W Series Motor Gearbox

Lot ID: BID 624

Baltimore Aircoil Company VTL-E 059-H Cooling Tower

Little used Baltimore Aircoil Company model VTL-E 059-H is an open circuit cooling tower rated at 497kW, designed to operate in conjunction with equipment such as cooling towers to ensure water remains free of water-borne bacteria. £9450 when purchased Brand New in 2016.

Lot ID: CC637

Industrial Cooling Systems (ICS) TAE EVO 020 Chiller

This De-Gasses frigerated air packaged cooler is an ICS TAE 020 Evo Tech. Designed specifically for industry, well suited to guarantee a secure and repeatable production process, while saving money and protecting the environment.

Lot ID: CD650

Technowash Single Stage Gas Fired Through Feed Basket Spray Wash

The Technowash 1250 has been designed to specifically accommodate the heavier loads and where the level of component surface contamination is high.

Lot ID: DA1392

Kerry ( Guyson International ) Kerry Ultrasonic Compact 300A/4

This second-hand Guyson International Kerry 300A/4 multi stage Ultrasonics cleaning system offers a rapid and highly effective method of precision cleaning components to a very high standard.

Lot ID: DA1397

Ryeford Engineering Stainless Steel Ardrox 311 Oiling Line with Pall Dewatering Filter System & Solution Cooling.

Stainless steel cleaning tank for Ardrox 311 Oiling Line including Pall Fluid de-watering and conditioning purifier, solution cooling system, lip extraction, bunded and draining station.

Lot ID: DA1413

ICI Special Cleanfast DLS E265V Enclosed Low Emission Solvent Degreasing Plant

ICI E265V Special vapour degreasing plant, carrier size of 900mm x 450mm x 550mm (H) offers a compliant solvent vapour phase cleaning cycle in a single operation. Complete with a unique ICI double lid sealing system, this immersion single-stage process tank can also be used with any wet process requiring fume extraction.

Lot ID: DC1509

Vixen JW99 Top loading Spray Washer

The Vixen Jetwash JW99 is a stainless steel lined cellular type rotary hot wash spray machine, which uses towns water and any number of available environmentally friendly detergents. Spray jets fitted around the basket are supplied by the pump and wash the components from all angles as they rotate.

Lot ID: DF1623

Pura 2000 Clean Air Work Station

Pura's 2000 line of Horizontal Laminar Flow Clean Air Work Stations are engineered to enhance the performance of the cabinet and the overall airflow efficiency of the cleanroom.

Lot ID: EA1813

Fettling Bench

Metal frame fettling table with down draft dust extraction capability and a 4" wide, Record swivel engineering Vice fitted centrally.

Lot ID: EA1885S

Fettling Bench

Metal frame fettling table with down draft dust extraction capability. Inset metal grid 840mm x 640mm fitted in a wooden tabletop.

Lot ID: EA1886S

Lakestyle Downdraft Bench

Lakestyle Down Draft Fettling Booth for the control of dusts from manual grinding, fettling, fiberglass and composite materials trimming type operations.

Lot ID: EA1893

Filtex FX294 Configured For Oil Mist plus Air Streams with Debris

This second hand FX 294 H 5.5 kW extraction unit is currently set up for oil mist extraction and comes without a shaker motor.

Lot ID: EB1909

Bioair 1.2 Safeflow Microbiological Safety Cabinet

SafeMate Eco+ ABC is a “Vertical Laminar Airflow with Partial Recirculation” cabinet which provides three areas of protection. First for the operator, second for the environment and third for the product. A class II biological safety cabinet to AS 2252.2—2009

Lot ID: EB1921

Bioair 1.2 Safeflow Microbiological Safety Cabinet

SafeMate Eco+ ABC is a vertical Laminar airflow with partial recirculation cabinet which provides three areas of protection. Firstly for the operator, second for the environment and 3 for the product. A class II biological safety cabinet to AS 2252.2—2009

Lot ID: EB1922

Bioair 1.2 Safeflow Microbiological Safety Cabinet

SafeMate Eco+ ABC is a vertical Laminar airflow with partial recirculation cabinet which provides three areas of protection. Firstly for the operator, second for the environment and 3 for the product. A class II biological safety cabinet to AS 2252.2—2009

Lot ID: EB1924

Bioair 1.2 Safeflow Microbiological Safety Cabinet

SafeMate Eco+ ABC is a vertical Laminar airflow with partial recirculation cabinet which provides three areas of protection. Firstly for the operator, second for the environment and 3 for the product.

Lot ID: EB1940

Vokes Oil Mist Air Filter Unit

A heavy duty industrial air cleaner for effectively separating oil mists, oil fumes and emulsion mists during continuous operations. There are three filter stages with differential pressure gauges at each step. The first filter is washable, which reduces operating costs.

Lot ID: EB1984

Zubler V7000 Dust Collector

Zubler single suction units are highly versatile, used for a wide range of low dust and fume applications, and ideal for use in dental laboratories.

Lot ID: EC2040

Zubler V7000 Dust Collector

Zubler single suction units are highly versatile, used for a wide range of low dust and fume applications, and ideal for use in dental laboratories.

Lot ID: EC2041

Zubler V7000 Dust Collector

Zubler single suction units are highly versatile, used for a wide range of low dust and fume applications, and ideal for use in dental laboratories.

Lot ID: EC2042

Quirepace Ltd BVC Heavy Duty Industrial Vacuum Cleaner

The VV182 is a small static industrial vacuum cleaner designed for special applications where the principal requirement is for air vacuum, but where there may be some material contamination of the air. The VV182 combines a 20 litre collection drum with a powerful multistage vacuum pump, 3ph operation.

Lot ID: ED2169

Tongbao Free Standing Air Handling None Powered Dust Filter Plant

A stand alone venting unit ideal for inclusion in a dust extraction system to add additional capacity or give an existing process enhanced environmental and operator safety benefits. Manual shaker sock cleaning mechanism. (Please ask for details of suitable fans we have in stock to go with this unit)

Lot ID: EE2200

Nederman Dantherm NC Passive Cyclone

The Nederman NC range cyclone is a separator that uses centrifugal force to purify airstreams loaded with bulk loose debris such as chips, trimmings or dusts.

Lot ID: EE2204

Draper Portable 1200W Extraction Unit

Capable of extracting small to medium particles, ideal for a small toolroom or work shop.

Lot ID: EE2229

Nederman Modular Filter System (MFS) with Hepa Filter

The Modular Filter System (MFS) offers a simple and efficient clean air solution for light industrial and commercial processes that generate smoke, dust, fume gases and odours. Conveniently mounts to a wall/work station saving floor space, add extraction arms and fans to capture pollutants right at the source protecting workers breathing zones.

Lot ID: EE2238

Nederman Modular Filter System (MFS) with Hepa Filter

The Modular Filter System (MFS) offers a simple and efficient clean air solution for light industrial and commercial processes that generate smoke, dust, fume gases and odours. Conveniently mounts to a wall/work station saving floor space, add extraction arms and fans to capture pollutants right at the source protecting workers breathing zones.

Lot ID: EE2239

Filtex FX250 H Dust Extractor with Explosion Relief Panel

This FX250 H, self-contained, high-efficiency compact dust extractor features a integrated fan, motor and filter assemblies with mechanical shaking for effortless cleaning. Built for safety and performance, it also includes a explosion relief panel.

Lot ID: EE2256

Filtex Dust Extractor with Explosion Relief Panel

Upgrade your dust extraction process with this compact, self-contained FX 250 H unit, complete with fans and filter media for automatic or manual cleaning and collection. Powered by a 5.5kW / 7.5Hp motor, this versatile fine dust filter handles a wide range of dust types across multiple applications and includes a built-in explosion relief panel.

Lot ID: EE2257

Fixed Height Fettling Bench with Lighting

Down Draft Fettling Booth for the control of dusts from manual grinding, fettling, fiberglass and composite materials trimming, type operations.
No work table or grille included.

Lot ID: EY1694

Duscovent Cyclonic Dust Extractor with Reverse Pulse Cleaning

A small compact stand alone dust extraction unit with reverse pulse jet cleaning. (No fan)

Lot ID: EY1726

Slee of London Clean Air Cabinet

A laminar flow cabinet is a carefully enclosed bench designed to prevent contamination of semiconductor wafers, biological samples, or any particle sensitive materials. Air is drawn through a HEPA filter and blown in a very smooth, laminar flow towards the user.

Lot ID: EZ1768

Dust Control Systems Ltd Floor Mounted High Volume Fan and 22kW / 25Hp Motor

A high volume fan powered by a 22kW / 25hp motor and a flow rate of 5.55m³/sec will be sufficient to cover most applications. Complete with an acoustic booth and electrical control panel

Lot ID: FA126

Fan Engineering Floor Mounted Large Capacity Multivane Fan

Floor mounted multivane forward curved fans are designed primarily for heating & ventilating applications. They handle clean air, have medium peak efficiency and an overloading power characteristic.

Lot ID: FC134S

Fan Engineering 3 Phase Induction Motor Driven Fan with Impellor

A Multivane plug fan with an induction driven motor mounted into a fixing plate. Direct drive, Ideal for air circulation within a ducting set up or other application where air circulation is required.

Lot ID: FD141

Fan Engineering 4kw Fan with Impellor

A Multivane plug fan with a 4kW (5.4Hp) motor mounted into a fixing plate. Direct drive, Ideal for air circulation within a ducting set up or other application where air circulation is required.

Lot ID: FD142

Fan Engineering 5.5kw Fan with Impellor

A Multivane plug fan with a 5.5kW (7.3Hp) motor mounted into a fixing plate. Direct drive, Ideal for air circulation within a ducting set up or other application where air circulation is required.

Lot ID: FD143

Fan Engineering 5.5kw Fan with Impellor

A Multivane plug fan with a 5.5kW (7.3Hp) motor mounted into a fixing plate. Direct drive, Ideal for air circulation within a ducting set up or other application where air circulation is required.

Lot ID: FD144

Fan Engineering 4kw Fan with Impellor

A Multivane plug fan with a 4kW (5.4Hp) motor mounted into a fixing plate. Direct drive, Ideal for air circulation within a ducting set up or other application where air circulation is required.

Lot ID: FD145

Fan Engineering 5.5kw Fan with Impellor

A Multivane plug fan with a 5.5kW (7.3Hp) motor mounted into a fixing plate. Direct drive, Ideal for air circulation within a ducting set up or other application where air circulation is required.

Lot ID: FD146

Fan Engineering 5.5kw Fan with Impellor

A Multivane plug fan with a 5.5kW (7.3Hp) motor mounted into a fixing plate. Direct drive, Ideal for air circulation within a ducting set up or other application where air circulation is required.

Lot ID: FD147

Dry Filter Bench Spray Booth

This bench level spray booth operates under the same principle as full size booth but with a work surface at a convenient height to allow the painting of small components.

Lot ID: GA845

Spray Coating Booth

Powder coating booth with hanging rail, internal light and outlet ducting for connection to suitable dust extraction unit.

Lot ID: GD866

Grundfos Vertical 6 Chamber High Pressure and Volume Centrifugal Pump

Vertical multistage high volume centrifugal pump designed for tank top mounting for pumping of washing applications or for pumping of cooling lubricants and cutting oils for machine tools.

Lot ID: MA695

Newport Arc Lamp Power Supply 69920

Universal Arc Lamp Power Supply, 350W to 1000W.

Lot ID: MA702

Uniphase Helium - Neon Laser Beam Generator.

A Uniphase model 155A SL Laser, Visible red 632.8nm wavelength with a beam diameter of 0.88mm.

Lot ID: MA703

Hymo Hydraulic Scissor Lifting Platform

Hymo AXX 4 series lifting tables are modern, reliable devices whose main task is to effectively level the difference in levels in various types of work environments.

Lot ID: MA708

MecWash Aquasave A30 Water Processing Unit

A Mecwash Aquasave water recycling unit with pre-treatment heating and dosing unit. Ideal for adding into an existing washing facility to improve water quality, reduce costs plus it is beneficial for the environment.

Lot ID: MA710

Dellmeco Double Diaphragm Pump

Dellmeco double diaphragm pump. 2" BSPP ported polyethylene body air operated pump with TFM diaphragms and PTFE valves. Max flow of 565 Litres per minute.

Lot ID: MA716

Dellmeco Double Diaphragm Pump

Dellmeco double diaphragm pump. 2" BSPP ported polyethylene body air operated pump with TFM diaphragms and PTFE valves. Max flow of 565 Litres per minute.

Lot ID: MA717

FSP-Tech General Purpose Shower with Face / Eye Wash Station

General Purpose Emergency wash station. Unheated Shower Complete with Eyebath/ Facewash Fountain

Lot ID: MA735

FSP-Tech General Purpose Shower with Face / Eye Wash Station

General purpose emergency wash station including unheated shower complete with eyebath/ facewash fountain.

Lot ID: MA736

Hendor Pump and Spare Motor

This Hendor SS vertical pump is a single stage centrifugal immersion pump with a capacity of up to 20M³/Hr and a max head of 21M. Included is a spare motor.

Lot ID: MA762

Walther Trowal Magnetic Conveyor / Seperator

If your work pieces and abrasive media are roughly similar in size, then the external magnetic separation units from Trowal could be the ideal solution for precisely separating parts. This saves both time and money over manually screening your parts and media once it has left the system.

Lot ID: MB770

Bemco Inc. 316 Stainless Steel Thermal Heating and Cooling Panel

A double plate stainless steel panel heating battery complete with manifold, fabricated and welded construction with 3/4"BSP entry and exit pipework.

Lot ID: MB772

Bemco Inc. 316 Stainless Steel Thermal Heating and Cooling Panel

A triple plate stainless steel panel heating battery complete with manifold, fabricated and welded construction with 3/4"BSP entry and exit pipework.

Lot ID: MB773

Bemco Inc. 316 Stainless Steel Thermal Heating and Cooling Panel

A triple plate stainless steel Thermal and Cooling Panel complete with manifold, fabricated and welded construction with 3/4"BSP entry and exit pipework.

Lot ID: MB776

Gardner Denver (Rietschie Thomas) Vacuum Pump

Gardner Denver Oil flooded rotary vane vacuum pump. Foot pedal or continuous operation.

Lot ID: MB780

Buffalo Heavy Duty Planetary Mixer

The reliable 9 litre heavy duty planetary mixer from Buffalo. Has the ability to mix, beat and whisk easily. The powerful 550W motor and durable stainless steel bowl mean that this industrial planetary mixer is impressively strong and reliable. Interlocked safety cover and bowl height lifting handle.

Lot ID: MC859

Secomak Blower Unit

Secomak high-speed airflow blowers for heating and cooling. A reliable belt driven extremely energy efficient low maintenance compact unit for increasing air flow and pressure up to 98 mbar.

Lot ID: MC879

Gast MFG Corp Regenerative Air Blower

Gast Manufacturing 'Regenair', regenerative blowers for vacuum or pressure generation.

Lot ID: MC885

Ebara Corporation Dry Vacuum Pump

The dry vacuum pump is a screw type consisting of a pair of rotating none contact rotors in the main pump and a booster pump and which are connected in series.
N2 gas and water cooling is required with the control circuit monitors multiple features during operation, having an earth leaker breaker and electro-magnetic switch.

Lot ID: MC888

Centrotherm Gas Fume Scrubber

Centrotherm FLM Waste Gas Abatement System cleaning waste gas via burning, wet scrubbing and aerosol retention.

Lot ID: MC889

Tutco Farnam Inline FT400 Process Heater

Flow Torch™ 400 is an open coil air heater designed for high flow rates at low pressure drop due to its efficient design with minimal flow restrictions. The robust construction of this 6” diameter stainless steel heater offers reliable long-life performance and reduced operational cost.

Lot ID: MC890

Tutco Farnam Inline FT600 Process Heater

Flow Torch™ 600 is an open coil air heater designed for high flow rates at low pressure drop due to its efficient design with minimal flow restrictions. The robust construction of this 6” diameter stainless steel heater offers reliable long-life performance and reduced operational cost.

Lot ID: MC891

Aerogen Flame Treatment System

Flame treatment is a surface treatment process used to chemically modify a plastic container's surface for better label adhesion. This process uses specially designed equipment to create a controlled blend of natural gas and air that produces a flame.

Lot ID: MC892

Kuka KR 120 R2700 extra HA Robot & KRC4 Controller

The extremely compact, 6-axis, KUKA KR 120 R2700 Extra HA robot is ideal for conquering those jobs that require high accuracy and extreme precision. Suitable for a variety of applications, including lasers, palletizing, assembly, spot welding, and more! The KUKA KR 120 R2700 features a 120 kg payload and +/-0.05mm repeatability. Little use.

Lot ID: MD901J

Ebara 3LM 65-125/5.5 Centrifugal Electric Pump in Stainless Steel

Centrifugal pumps are commonly used for pumping water, solvents, organics, oils, acids, bases and any ‘thin’ liquids in both industrial, agricultural and domestic applications. In fact, there is a design of centrifugal pump suitable for virtually any application involving low viscosity fluids.

Lot ID: MD907

Ebara 3M/I 32-160/1.5 Centrifugal Electric Pump in Stainless Steel

Centrifugal pumps are commonly used for pumping water, solvents, organics, oils, acids, bases and any ‘thin’ liquids in both industrial, agricultural and domestic applications. In fact, there is a design of centrifugal pump suitable for virtually any application involving low viscosity fluids.

Lot ID: MD909

Ebara 3M/I 32-160/1.5 Centrifugal Electric Pump in Stainless Steel

Centrifugal pumps are commonly used for pumping water, solvents, organics, oils, acids, bases and any ‘thin’ liquids in both industrial, agricultural and domestic applications. In fact, there is a design of centrifugal pump suitable for virtually any application involving low viscosity fluids.

Lot ID: MD910

Ebara 3M/I 32-160/1.5 Centrifugal Electric Pump in Stainless Steel

Centrifugal pumps are commonly used for pumping water, solvents, organics, oils, acids, bases and any ‘thin’ liquids in both industrial, agricultural and domestic applications. In fact, there is a design of centrifugal pump suitable for virtually any application involving low viscosity fluids.

Lot ID: MD912

Ebara 3LM/I 40-125/2.2 Centrifugal Electric Pump in Stainless Steel

Centrifugal pumps are commonly used for pumping water, solvents, organics, oils, acids, bases and any ‘thin’ liquids in both industrial, agricultural and domestic applications. In fact, there is a design of centrifugal pump suitable for virtually any application involving low viscosity fluids.

Lot ID: MD915

Ebara 3LM/I 40-125/2.2 Centrifugal Electric Pump in Stainless Steel

Centrifugal pumps are commonly used for pumping water, solvents, organics, oils, acids, bases and any ‘thin’ liquids in both industrial, agricultural and domestic applications. In fact, there is a design of centrifugal pump suitable for virtually any application involving low viscosity fluids.

Lot ID: MD916

Ebara 3MHS/I 65-160 Centrifugal Electric Pump in Stainless Steel

Centrifugal pumps are commonly used for pumping water, solvents, organics, oils, acids, bases and any ‘thin’ liquids in both industrial, agricultural and domestic applications. In fact, there is a design of centrifugal pump suitable for virtually any application involving low viscosity fluids.

Lot ID: MD917

ELKOM UK Ltd Industrial Heated / Warming Table

Elkom GmbH manufactured heated/warming table for warming or heating, or composite curing. Warm table to a pre-determined temperature, adjustable up to 200°C. Used in the aircraft Industry once previously.

Lot ID: ME921

ARJAY Automation Conveyor and Weighing Cell - 2 Conveyors, Weighing Platform & Stacking Unit

A special purpose set up unit comprising of 2 driven conveyors, a weighing system, a vertical box conveyor and control panel.

Lot ID: ME924

EMB Papst Table Rotation, 4 Fan Cooler Unit with Loading & Unloading Conveyors

This cooling unit was originally designed to cool hot none ferrous stamping prior to the next operation. Parts were moved on a metal belt conveyor into the slowly rotating table which moved them below the four cooling fans, one at a time to reduce the temperature of the parts prior to being conveyed to the next operation.

Lot ID: ME925

Rook London 30 Ton Hydraulic Hand Press

A small hydraulic hand press up to 30 Ton with adjustable top plate allowing for various size items to fit within the press pressure range.

Lot ID: ME926

Specimen Storage Cabinet

A small compact, 10 drawer specimen storage cabinet with 10 drawer inlays with 50 off, 32mm diameter holes in each, ideal for small samples to keep them in order and prevent any damage or contamination. Would suit for example, a coin collection.

Lot ID: ME927

Pumping Station

The lifting station is a low height robust storage tank made from polyethylene with an angled bottom. The tank is designed to offer gravity feed with pumped return.

Lot ID: MW575

Hymo Hydraulic Lifting Platform

Hymo AXX 8 T series lifting tables are modern, reliable devices whose main task is to effectively level the difference in levels in various types of work environments.

Lot ID: MY609

Worthington Simpson 2 Pumps and Control Panel

Control panel and two Worthington Simpson close coupled end suction pump types WB, WJ & WJE form part of Flowserve’s D Line range of pumps.

Lot ID: MY626

Walther Trowal Conveyor

Walther Trowal C6.6/370 modular slatted belt conveyors are an ideal way of conveying products between processes. The modular construction means that individual or custom flights can be inserted allowing the unit to be adapted to suit a wide range of products.

Lot ID: MY629

Labotek Con- Evator Blower System, ABB 3.5kw motor

The Con-Evator PGT is designed for conveying of plastic material from a bag or bin to the intermediate hopper of the processing machine or another hopper.

Lot ID: MZ659

KEB Antriebstechnik GmbH High Torque, Slow Speed Electric Motor and Reduction Gearbox Assembly

Electric motor and gearbox giving an output of 125 rev/min.

Lot ID: MZ671

Caltherm Double Stage, Well Drying Oven

A Caltherm double chamber well drying oven with a total of 13.8kW of heating capacity, 3kW fan motor and two 840 litre drying chambers. Featuring independent, pneumatically operated lids (may achieve a higher working temperature 150°C TBC). Tested to 100°C

Lot ID: OB2331J

Caltherm Industrial Electric Twin Lane, Roller Track, Through Heating / Stoving / Drying Oven

A Caltherm Well Dryer, featuring two through feed chambers with independently controllable entry and exit doors. Roller tracking enables the ease of rolling in and through the chambers of components or fixtures with a suitable flat base. Additional roller tracking is supplied to offload from the chambers.

Lot ID: OC2449

Caltherm Twin Chamber Oven / Cooler With Automatic Conveyor Transfer

Caltherm oven/cooler with a programable cycle controller, powered opening doors, conveyor through feed and controlled heating and cooling cycles. 32.4kW of heating power ensures rapid heating of the oven chamber.

Lot ID: OC2482

Lanemark Combustion Engineering Ltd FDGAN-3 Natural Gas Burner

The FD range of burners are forced draught burners designed for industrial process air heating requirements. Short flame lengths, exceptional flame stability and accurate turndown as low as 9kW (30,000 Btu/h) are achieved by the unique Lanemark cone design combustion head.

Lot ID: OD2502

Lanemark Combustion Engineering Ltd FDGAN-3 Natural Gas Burner

The FD range of burners are forced draught burners designed for industrial process air heating requirements. Short flame lengths, exceptional flame stability and accurate turndown as low as 9kW (30,000 Btu/h) are achieved by the unique Lanemark cone design combustion head.

Lot ID: OD2503

Lanemark Combustion Engineering Ltd Burner FDGAN-3 Natural Gas Burner

The FD range of burners are forced draught burners designed for industrial process air heating requirements. Short flame lengths, exceptional flame stability and accurate turndown as low as 9 kW (30,000 Btu/h) are achieved by the unique Lanemark cone design combustion head.

Lot ID: OD2504

Barlow Whitney E300 VAF Vertical Air Circulated Electric Industrial Oven

This second hand Barlow Whitney industrial batch oven is suitable for almost any application from simple drying processes to exacting metal treatments.

Lot ID: OD2544J

Carbolite 300°C Nitrogen Purge Gas Tight Oven

An electric Carbolite gas tight industrial oven with a nitrogen purge set up. This 300°C oven features a roof mounted air circulation fan, stainless steel interior with 7 shelf runner positions.

Lot ID: OE2601

Carbolite 1200°C LCF Large Industrial Chamber Furnace

From a range of well proven highly efficient large capacity furnaces incorporating features which combine the expertise of generations of furnace construction and design, together with the latest high technology, components, and techniques.

Lot ID: OE2613

LTE Natural Convection Electric Drying Cabinet

A natural convection electric cabinet with a max temperature of 85°C, this LTE drying cabinet is manufactured from stainless steel with toughened glass sliding doors. Also featuring two stainless steel shelves with 35 shelf positions & a 180 litre capacity.

Lot ID: OE2624

LTE Natural Convection Electric Drying Cabinet

A natural convection electric cabinet with a max temperature of 85°C, this LTE drying cabinet is manufactured from stainless steel with toughened glass sliding doors. Also featuring two stainless steel shelves with 35 shelf positions & a 180 litre capacity.

Lot ID: OE2625

Montford Bench Top Test Chamber

The Montford Mini-Mech Bench Top Chamber is a portable compact model which is easy to transport, locate and install, making it Ideal for environmental testing of smaller products and components for extreme heat, and cold conditions.

Lot ID: OP917

Sandras Selerity Technologies Series 900 Polartherm

Temperature programmed HPLC is taken to extremes with the Polaratherm™ Series 9000 Total Temperature Controller with mobile phase preheating, and optional cryo cooling.

Lot ID: OR1193

Seba Developments Top Loading Drying Oven

This Seba Electrically Heated Top Load oven (also referred to as a chest or coffin oven) offers a compact space savings design with ease of loading.

Lot ID: OU1480

SPX Blue M TPS DC-146-NY-UP550 Oven

Blue M 146 Standard Industrial Oven which offers exceptional temperature uniformity whilst providing fresh air turnover for critical drying applications.

Lot ID: OW1771

Fibrex Heat Treatment Plants Endothermic Gas Generator

The Endothermic gas generator produces the protective gas that is used in some heat treating processes and furnaces. The atmosphere is prepared by the mixing of hydrocarbon natural town gas, with air.

Lot ID: OY1964J

Carbolite Sterilization Oven

Controlled Atmosphere Oven suitable for use in a batch production environment. The oven is suitable for use with inert gases such as nitrogen. The fully sealed inner case enables oxygen levels of less than 50ppm to be achieved in the work chamber.

Lot ID: OY1970

Thermotron Environmental Chamber

A used Thermotron Temperature and Humidity model SM-16 Test Chamber.
When extreme temperature testing is required, the SM-16 offers ultimate flexibility for your materials testing needs. Please see attached service engineers report.

Lot ID: OY2020

Thermotron Environmental Chamber

A used Thermotron Temperature model SM-8 Test Chamber.
When extreme temperature testing is required, the SM-8 offers ultimate flexibility for your materials testing needs.

Lot ID: OY2023

Caltherm High Precision 400°C Oven with Shuttle Loading Table

A small heat treatment oven manufactured in 2004 by Caltherm. Digitally controlled heating and cooling cycles, originally designed for annealing tubes and other such more complex parts.

Lot ID: OY2028

Geotech Gas Analyser

The GA3000 PLUS range of gas analysers offer an effective online monitoring giving local data outputs.

Lot ID: OY2029

Caltherm Roller Hearth Turbine Blade Exceptionally high specification Drying Oven

A very high quality, 120°C drying oven to AMS 2750 E standard. Originally designed for use in the aerospace industry.

Lot ID: OY2070J

Centrotherm Heating Cassette

Centrotherm Heating Cassette

Lot ID: OZ1259-9

CDS Airtek 900°C Electric multi process Oven / Furnace

The oven can heat up to 900° C and was originally designed to have a small bleed of dilution air going into the oven during heat up, this would be increased and used to allow cooling of the products on completion of the heat cycle. A large roof damper is used in conjunction with the air intake to control temperature and cooling.

Lot ID: OZ2121J

RJH Powerflin Lynx LX Series Ring and Extremity Finisher / Belt Grinder

The RJH POWERFIN LYNX Ring and Extremity Finisher and Belt Grinder is a heavy duty high performance machine designed for finishing internal rings, open or blind components. Complete with a large selection of spare belts.

Lot ID: PA1138

Mestra Double Ended, Twin Speed Polishing Lathe Housed in a Console

The MESTRA double ended, single phase polishing lathe is a modern and elegant design, made to the most modern concepts ensuring high quality and safety. The motor housing is made of extruded aluminium tube. Large base for greater stability, this unit is mounted inside a work console which has a light.

Lot ID: PC1177

Mestra Double Ended, Twin Speed Polishing Lathe Housed in a Console

The MESTRA double ended, single phase polishing lathe is a modern and elegant design, made to the most modern concepts ensuring high quality and safety. The motor housing is made of extruded aluminium tube. Large base for greater stability, this unit is mounted inside a work console which has a light.

Lot ID: PC1178

Mestra Double Ended, Twin Speed Polishing Lathe Housed in a Console

The MESTRA double ended, single phase polishing lathe is a modern and elegant design, made to the most modern concepts ensuring high quality and safety. The motor housing is made of extruded aluminium tube. Large base for greater stability, this unit is mounted inside a work console which has a light.

Lot ID: PC1179

Mestra Double Ended, Twin Speed Polishing Lathe Housed in a Console

The MESTRA double ended, single phase polishing lathe is a modern and elegant design, made to the most modern concepts ensuring high quality and safety. The motor housing is made of extruded aluminium tube. Large base for greater stability, this unit is mounted inside a work console which has a light.

Lot ID: PC1180

Birkett Cutmaster Through Feed Horizontal Belt Linishing and Sanding Machine

This Birkett Cutmaster 900mm flatbed is a premier industrial metal working multi-finishing machine. This single belt dry working machine is equipped with a powerful motor, allowing it to process the toughest and heaviest jobs around.

Lot ID: PD1193

RJH Double Ended Polisher Universal Brushing & Mopping Machine

The RJH double-ended polisher is a robust machine that is ideal for general industrial use. The double-ended design allow two different consumables to be mounted on each end, permitting two operations to be performed sequentially on the same component.

Lot ID: PE1205

Canning 1612 Model 1, Twin Head, Polishing Lathe

This Canning Model 1612 is one of the most widely used heavy duty manual polishers ever produced and is equipped with 4 heavy duty bearings for long life, double ended spindle ends for flexibility and is powered by a single robust high torque motor. Taper ends to each spindle.

Lot ID: PE1211J

Higgs Heavy Duty Horizontal Floor Mounted Belt Linisher

Horizontal belt linisher with a 100mm wide belt. Ideal for a small workshop or engineering works.

Lot ID: PE1212J

Seeco Wet Belt Linisher

Seeco Wet Belt Linisher. 75 mm wide belt

Lot ID: PL586

Morrisflex Belt linisher

Morrisflex 1060 Belt Grinder/Linisher

Lot ID: PQ906

RJH Profile Belt Linisher, Extractor Mounted

This second hand RJH Morrisflex 1060 belt belt linisher. Mounted Oman a self contained dust control plant, is a high quality industrial triangulated backstand abrasive belt / sander suitable for use on a variety of materials and processes.

Lot ID: PQ907

Ellis Brothers Polishing / Linishing Machine

This Used (second hand) Ellis Brothers machine is an industrialy rated combined backstand linisher / belt sander and polisher

Lot ID: PQ945

Greif Double Arm, Rear Driven, Idling Contact Roll Linisher

Heavy duty space saving twin belt linishing machine, complete with forward facing adjustable angle arms with guarding and adaptable idling contact wheels.

Lot ID: PR969

Burrows & Smith D-Burr Gear Deburring Machine

The D-Burr is an efficient machine designed to remove burrs from spur, bevel and helical gear teeth up to a 25° helix angle and sprockets and other components which have equi-spaced teeth around the periphery

Lot ID: PU1057

Stahli Isotropic Polishing / Lapping Machine with Automatic Loader

Swiss made Isotropic Polishing / Lapping machine with automatic loading.

Lot ID: PY1113J

Drake Power Systems 24V/1250A DC Air Cooled Transformer Rectifier

Drake Power Systems Saturable Reactor (transductor) controlled silicon diode, full wave bridge rectification, DC Rectifier.

Lot ID: RA731

Drake Power Systems Rectifier

2000 Amp 8 Volt DC air cooled Rectifier.
Predominantly used in the electro plating, electro forming, electro paint, electro polishing and motor control industries, to provide a stable DC current supply.

Lot ID: RC721J

Bowers Electricals Ltd. 600kVA 10000/400v Dyn11 ONAN Eco Transformer

This distribution transformer is an oil cooled unit (ONAN) of 600kVA 10000/400v originally designed to provide power to an induction furnace.

Lot ID: RE732S

Drake Power Systems 16V DC, 1000A Rectifier

Drake Power Systems Saturable Reactor (transductor) controlled silicon diode, full wave bridge rectification, DC rectifier.

Lot ID: RF733J

Drake Power Systems 16V DC, 1000A Rectifier

Drake Power Systems Saturable Reactor (transductor) controlled silicon diode, full wave bridge rectification, DC Rectifier.

Lot ID: RF734J

Polaron Cortina Controller

A Siemens PLC control panel that is capable of controlling up to three Cortina Rectifiers.

Lot ID: RU705

Munk PSP Varipuls 100A/6V Rectifier

Part of the MUNK Varipuls psp family - the modules and plug-in units of these plating rectifiers feature advanced switched-mode power supply technology designed for simple air cooling.

Lot ID: RU711

Mac'Ants Group Shot Blasting Pressure Pot

Manufactured by Mac'Ants, the model MZ24200 is the largest standard model of the current range, carrying 150kg of media and is ideal for shotblasting rooms. This unit needs a mesh sieve, an air pressure valve, suitable hose and gun to complete it ready for use.

Lot ID: SD1032

Sealey Products Shot Blast Cabinet

This heavy-duty steel cabinet features a toughened glass viewing screen for enhanced durability and visibility. The Sealey shot blasting cabinet, in like-new condition, is an excellent choice for shot blasting with glass beads, silicon carbide, aluminium oxide and blasting grit.

Lot ID: SE1057

Guyson International 1400 Mediblast Shot Blast Cabinet

The Guyson Mediblast range made from high chrome 316L surgical stainless steel has been specially engineered for medical product manufacturers and laboratories where the introduction of ferrous contamination would be detrimental to the production process.

Lot ID: SE1071

20ft Shotblast Room

20ft long steel container conversion into a shot blasting room, with internal lighting, double door access plus a sing pedestrian side access door. Extraction through a suitable extraction unit via ducting outlets to the roof and rear wall.

Lot ID: SE1084

Wheelabrator Vacublast, Ventus 72S Industrial Shot Blast Cabinet

A well made second hand Vacublast, Ventus 72S self contained suction venturi fed shot blast cabinet. For manual light to medium blasting applications.

Lot ID: SW763

Herco Wassertechnik Electronic Water Compact Reverse Osmosis Unit

This compact reverse osmosis unit is used for the desalination of softened drinking water according to current drinking water regulations.

Lot ID: TD362

TWK srl Apollo SLR 80 Thermal Fluid Heater

The TWK srl Apollo SLR 80 Thermal Fluid Heater typically operates at up to 200°C at atmospheric pressure, the remaining fluid and pumpable down to minus -20°C (even lower with special fluids). Making it a solution suitable for a multitude of thermal processing applications.

Lot ID: TE366

Wilden P4 Diaphragm Pump

Wilden diecast aluminium double diaphragm pneumatically operated pump

Lot ID: TU148

Lamarflo Electroless Plating and Multiple Option Wet Bench

Electroless plating, also known as chemical plating or autocatalytic plating, is a class of industrial chemical processes that create metal coatings on various materials by a single chemical reaction of metal cations in a liquid bath.

Lot ID: TZ269

Ruwac Industriesauger NA35 DustEx /GasEx Wet Separator

Ruwac Industriesauger NA35 DustEx / GasEx Wet Separator. GRP construction. Flexible due to it's modular system. For separating dust from raw gases is referred to as wet separator (NA). The NA extract the dust-laden air and transport it into one

Lot ID: TZ274

Walther Trowal Complete Mass Finishing Vibratory Start to Finish Processing Cell

A Walther Trowal, four stage finishing process comprising of a loading tipper, vibratory finishing bowl, magnetic transfer conveyor and rotating continuous parts dryer.

Lot ID: VA2172

Walther Trowal CA650 Vibratory Bowl

A Walther Trowal, three stage mass finishing cell / process comprising of a loading tipper, large vibratory helical finishing bowl and rotating continuous 3000Kg's/ Hr continuous parts rotary dryer. Electrical control panel included

Lot ID: VA2173

Dreher CraneCare Lift N Load Hoist

A lift and load device built by CraneCare to work in conjunction the the Dreher VT 5 range of machines (Our stock number VT1037 A & B) for replenishing the media and parts into the processing bowls.

Lot ID: VT1047A

Dreher CraneCare Lift N Load Hoist

A lift and load device built by CraneCare to work in conjunction the the Dreher VT 5 range of machines (Our stock number VT1037A & B) for replenishing the media and parts into the processing bowls.

Lot ID: VT1047B

Spencer Halstead Lift And Tip Elevator

Lot ID: VW1143

Freddy Cleaner

The Freddie Ride on Sweeper is an ergonomic way to sweep large floor areas of dust and debris. Perfect for confined spaces and busy areas.

Lot ID: BID 627

Dual User Downdraft Extracted Multi Use Cabinet

This aluminium duel user cabinet comes with downdraft extraction facility which can be used for many functions including cleaning, polishing or any operation that creates nuisance dusts or fumes. The options to fit two sets of gauntlets makes the unit more adaptable.

Lot ID: BID 631

Startrite Sabre Vertical Bandsaw

The Sabre bandsaw has been designed to be the ideal heavy-duty bandsaw for the demanding workshops, offering a host of innovative features and generous specification, making it the most capable, powerful and easy-to-use machine in its class.

Lot ID: BID 632

Spares from Gema Booth Installation

A pallet of various spares for a Gema spray booth, essential spares for any maintenance department to hold

Lot ID: BID 633

Pair of fully insulated filter housings

A pair of fully insulated filter housings with stainless steel cladding
Used for high temperature, high pressure solutions in an aggressive environment.

Lot ID: BID 635

PVC and ABS pipework

A pallet of a variety of PVC and ABS pipework. Ideal to hold in any maintenance department for spares

Lot ID: BID 637

Guarding and spare parts for polishing machines

A quantity of guarding and spare parts for polishing machines

Lot ID: BID 638

Corrosion resistant flooring panels

A quantity of corrosion resistant flooring panels for aggressive environments such as electroplating departments or other associated chemical process.
Ideal spares to be held by a maintenance department, where costs would otherwise be prohibitive

Lot ID: BID 639

Gas Bottle Storage

A secure, prefabricated panelled cage.
Able to be flat packed and reconfigured to customers requirements.
Includes contents.

Lot ID: BID 640

Multi stage separation tank

.A multistage solids separation tank

Lot ID: BID 643

Spark Arrestor Box

A spark arrestor box for grinding machines as an in-line safety device installed in ductwork or mounted directly onto a dust collector

Lot ID: BID 646

Spark Arrestor Box

A spark arrestor box for grinding machines as an in-line safety device installed in ductwork or mounted directly onto a dust collector

Lot ID: BID 647

Spark Arrestor Box

A spark arrestor box for grinding machines as an in-line safety device installed in ductwork or mounted directly onto a dust collector

Lot ID: BID 648

Spark Arrestor Box

A spark arrestor box for grinding machines as an in-line safety device installed in ductwork or mounted directly onto a dust collector

Lot ID: BID 649

Spark Arrestor Box

A spark arrestor box for grinding machines as an in-line safety device installed in ductwork or mounted directly onto a dust collector

Lot ID: BID 650

Spark Arrestor Box

A spark arrestor box for grinding machines as an in-line safety device installed in ductwork or mounted directly onto a dust collector

Lot ID: BID 651

Insulation Material Pallet

Pallet of industrial composite & insulation material including sheets of grade 1P/13 materials.

Lot ID: BID 652

Insulation Material Pallet

Pallet of industrial composite & insulation material including sheets of grade HGW 2082, 6G/92 and 10G/48 materials.

Lot ID: BID 653

Insulation Material Pallet

Pallet of industrial composite & insulation material including blocks of Bear brand materials.

Lot ID: BID 654

Insulation Material Pallet

Pallet of industrial composite & insulation material including blocks of Bear brand materials.

Lot ID: BID 655

Insulation Material Pallet

Pallet of industrial composite & insulation material including multiple sheets of materials.

Lot ID: BID 656

Insulation Material Pallet

Pallet of industrial composite & insulation material including panels of grade 1P/13 & Carp brand materials.

Lot ID: BID 657

Insulation Material Pallet

Pallet of industrial composite & insulation material including panels of grade SRBP, HGW 2028, HP 2061, IP/13 & 2F/13 materials.

Lot ID: BID 658

Insulation Material Pallet

Pallet of industrial composite & insulation material including panels of grade SRBF/Carp brand and HGW 2028 materials.

Lot ID: BID 659

Insulation Material Pallet

Pallet of industrial composite & insulation material including multiple sheets of materials.

Lot ID: BID 660

Insulation Material Pallet

Pallet of industrial composite & insulation material including blocks of grade 10G/40 materials.

Lot ID: BID 661

Insulation Material Pallet

Pallet of industrial composite & insulation material including sheets of grade 10G/40 materials.

Lot ID: BID 662

Insulation Material Pallet

Pallet of industrial composite & insulation material including multiple sheets of materials.

Lot ID: BID 663

Insulation Material Pallet

Pallet of industrial composite & insulation material including panels of grade SRBP/Kite brand materials.

Lot ID: BID 664

Industrial Composite Material - Pallet 1

Pallet of industrial composite & insulation material including sheets of grade 1P/13 and crow brand materials.

Lot ID: PAL100

Industrial Composite Material - Pallet 2

Pallet of industrial composite & insulation material including sheets of grade 1P/13 at various thicknesses.

Lot ID: PAL200

Industrial Composite Material - Pallet 3

Pallet of industrial composite & insulation material including sheets of grade 1P/13 and kite brand materials.

Lot ID: PAL300

Industrial Composite Material - Pallet 4

Pallet of industrial composite & insulation material including 20 large blocks of materials.

Lot ID: PAL400

Industrial Composite Material - Pallet 5

Pallet of industrial composite & insulation material including 4 extra large blocks of materials.

Lot ID: PAL500

Industrial Composite Material - Pallet 6

Pallet of industrial composite & insulation material including sheets of grade 1P/13 and 10G/40 materials.

Lot ID: PAL600

Industrial Composite Material - Pallet 7

Pallet of industrial composite & insulation material including sheets of grade 2F/3/PTFE materials.

Lot ID: PAL700

Industrial Composite Material - Pallet 8

Pallet of industrial composite & insulation material including sheets of grade 1P/13 and whale brand materials.

Lot ID: PAL800

Elma Ultrasonic Dunking Modular Cleaning, Rinsing and Drying System

Elma Ultrasonic wash, rinse and dry modular cleaning line with heated wash and rinse and external pumped filters on each wet stage plus external heated filtering weir system. Including pneumatic lifting and lowering of wash baskets in each tank.

Lot ID: DD1541J

Steam Condensor Unit

A used duotemp steam condenser, used to remove steam from the exhaust of large, enclosed hot degreasing plant and equipment

Lot ID: DY1303

Vokes ScandMist Oil Mist Air Filter Unit

A heavy duty industrial air cleaner for effectively separating oil mists, oil fumes and emulsion mists during continuous operations. There are three filter stages with differential pressure gauges at each step.

Lot ID: EB1971

Nederman Filtac OMF 2000M Oil Mist Air Filter Unit

A heavy duty industrial air cleaner for effectively separating oil mists, oil fumes and emulsion mists during continuous operations. There are three filter stages with differential pressure gauges at each step. The first filter is washable, which reduces the operating costs (Dependant on the filter).

Lot ID: EB1972

Nederman Filtac OMF 1000M Oil Mist Air Filter Unit

A heavy duty industrial air cleaner for effectively separating oil mists, oil fumes and emulsion mists during continuous operations. There are three filter stages with differential pressure gauges at each step. The first filter is washable, which reduces operating costs (Dependant on filter).

Lot ID: EB1978

Tilghman (Wheelabrator) 4 Cartridge, Reverse Pulse Dust Extractor

This second hand Tilghman extraction unit with 4.0kW / 5.3 Hp motor is an extremely versatile fine dust filter, capable of handling numerous dust types over a wide range of applications. Pulse jet cleaning system, inlet deflector and large dust collection bucket.

Lot ID: EC2096

Donaldson Torit (DCE) Dry Scrubbing / Powder Dosing Chalking Units

Dry scrubbing units used for the removal of vapour components of raw gas, using ‘absorption’ onto an inert dry powder . It works especially well with vapours which have a dew point close to the operating, or in-duct temperature, in a dust or fume extraction system.

Lot ID: EV1459

Donaldson Torit (DCE) Dry Scrubbing / Powder Dosing Chalking Units

Dry scrubbing units used for the removal of vapour components of raw gas, using ‘absorption’ onto an inert dry powder . It works especially well with vapours which have a dew point close to the operating, or in-duct temperature, in a dust or fume extraction system.

Lot ID: EV1459-B

Donaldson Torit (DCE) Dry Scrubbing / Powder Dosing Chalking Units

Dry scrubbing units used for the removal of vapour components of raw gas, using ‘absorption’ onto an inert dry powder . It works especially well with vapours which have a dew point close to the operating, or in-duct temperature, in a dust or fume extraction system.

Lot ID: EV1459-D

Donaldson Torit (DCE) Dry Scrubbing / Powder Dosing Chalking Units

Dry scrubbing units used for the removal of vapour components of raw gas, using ‘absorption’ onto an inert dry powder . It works especially well with vapours which have a dew point close to the operating, or in-duct temperature, in a dust or fume extraction system.

Lot ID: EV1459-H

Donaldson Torit (DCE) Dry Scrubbing / Powder Dosing Chalking Units

Dry scrubbing units used for the removal of vapour components of raw gas, using ‘absorption’ onto an inert dry powder . It works especially well with vapours which have a dew point close to the operating, or in-duct temperature, in a dust or fume extraction system.

Lot ID: EV1459-I

Tosa Group Mimi Shrink Wrapping Machine

The machine is designed to wrap products in an automatic wrapping cycle, using non-toxic and non-harmful heat-shrink film. The shrink-wrapping cycle encloses the product in the shrink wrapping film, it passes through a heated tunnel which heats up and shrinks the wrap around the product. The machine can be used in automatic or manual mode.

Lot ID: MB782

EDL John Quinn Packaging Shrink Wrap

A shrink wrap machine is used for a wide variety of industries, the versatility of the machine catering to each industry's individual demands and requirements.

Lot ID: MC858

Yale 2T Electric Chain Hoist

Yale 2-tonne electric chain hoist with pendant control, offers a 2000kg safe working load and supplied complete with its monorail mounting for a wide range of industrial lifting applications.

Lot ID: MF943

Sartorius Combics 2 Stainless Steel Scales

Sartorius Combics 2 scale with IF Series floor scales are flat-bed scales. They feature strain-gauge load cells that provide especially precise resolution

Lot ID: MR329

AEC T 2000 20 kVa UPS Emergency Power System

T2000 3 PHASE UNINTERRUPTIBLE POWER SUPPLY T2000 - P SERIES 10-800 KVA

Lot ID: MU466

Hughes Wall Mounted Safety Shower plus Face and Eye Wash

This Hughes Safety Shower is designed to be plumbed in, giving easy and immediate access to anyone.

Lot ID: MZ679

Efco Top Loading Roller Lid Electric Drying and Treatments Oven

Efco Top Loading Well Type Roller Lid Electric Drying and Treatments Oven

Lot ID: OA2172

JLS (Redditch) Ltd Furnace Retort with Sealing Lid Oxygen Free Heat Treatments

A welded steel retort suitable for heat treating a wide variety of materials when placed inside a suitable oven or furnace. The retort is welded onto a base for stability and also allowing for FLT lifting. The lid is furnished with fixing points for bolting down to the pot and also has a lifting bar for ease of removal.

Lot ID: OD2539J

Morrisflex 160 Belt Linisher

Morrisflex 160 bench top belt linisher

Lot ID: PL626

Burrows & Smith D-Burr Gear Deburring Machine

The D-Burr is an efficient machine designed to remove burrs from spur, bevel and helical gear teeth up to a 25° helix angle and sprockets and other components which have equi-spaced teeth around the periphery

Lot ID: PU1057B

Burrows & Smith D-Burr Gear Deburring Machine

The D-Burr is an efficient machine designed to remove burrs from spur, bevel and helical gear teeth up to a 25° helix angle and sprockets and other components which have equi-spaced teeth around the periphery

Lot ID: PU1057C

Morrisflex Triangulated Back Stand Idler

The Morrisflex extra heavy duty free standing backstand, was designed to turn a standard polishing lathe into an abrasive belt machines. Triangulated from driven contact roller to enable longer linishing belt sizes, i.e. 3000mm for extended linishing belt life

Lot ID: PV1077

Walther Trowal 8 Gun Cyclonic Separation Media Recovery and Delivery System with Cartridge and Dust Control Plant

This equipment can be used to provide cyclonic separated blast media for venturi collection/delivery through 8 blast gun ports. This allows for the continuous operation of the blast machine whilst maintaining the integrity of the media by removing both the spent media and debris that the machine generates.

Lot ID: SB955

Harlequin Storage Tank

Harlequin bunded plastic BioDiesel storage and dispensing tank, rotationally moulded from a premium, specialist grade of BioDiesel resistant Medium Density Polyethylene

Lot ID: TR037

ActOn Vibrota type RB75 Parts Rumbler

A small single barrel rumbling machine for high quality, small component surface finishing. This small-scale, industrial barrel is designed to support media such as steel balls when surface finishing small components.

Lot ID: VD349

Osro Canning DB50 Twin Drum Barrelling Machine

This twin barrel Osro Canning DB50 is a heavy duty industrial quality construction to support media on part, part on part and steel ball burnishing finishing applications. Standard barrel sizes of 400mm A/F with 2 compartments per machine.

Lot ID: VV1109

Dr Ing Goessling Z1 Continuous Centrifuge Unit

The Goessling Z1 de-oiling centrifuges/washers were developed for the cleaning of massed produced formed parts. This is accomplished through smoothly accelerated centrifugal force with stop and start cycles, which aids the centrifugal process to produce a clean, de-oiled part.

Lot ID: VX1174

Abrafin Tornado 30 Litre Bench Bowl Vibrator

Tornado 30 Litre Bench Bowl Vibrator. This 30 Litre bowl utilises lightwork construction to ensure maximum power transfer into useful work. This versatile and flexible machine enables you to cope with a wide range of applications.

Lot ID: VZ1263

Pallet of Vibrator Bowl Spares

Pallet of vibrator bowl spares

Lot ID: BID 665

Pallet of Vibrator Bowl Screens

Pallet of various vibrator bowl screens

Lot ID: BID 666

Pallet of Walther Trowel Separation Screens

A pallet of Walther Trowel separation screens to fit a any number of different machines

Lot ID: BID 667

Pallet of Vibrator Bowl Screens and Flaps

Pallet of Spare Vibrator bowl separation screens and discharge flaps

Lot ID: BID 668

Pallet of Walther Trowel Polyurethane Spares

Pallet of useful Walther Trowel polyurethane spares

Lot ID: BID 669

Pallet of Walter Trowel Screens & Spares

Pallet of Walter Trowel separation screens and associated equipment spares

Lot ID: BID 670

Filtex FX375 Dust Extractor - 7.5kW / 10 Hp

This preowned FX375 H dust extraction unit offers exceptional versatility and performance, powered by a 7.5kW / 10Hp motor. Engineered for efficiency, it effectively filters a wide variety of fine dusts across multiple industrial applications.

Lot ID: EE2248

Pallet of Walter Trowel Screens & Spares

Pallet of Walter Trowel separation screens and associated equipment spares

Lot ID: BID 671

Electro-Scot 240 Volt to 115 Volt Transformer

An Electro-Scot 240Volt to 115Volt, 17.4 Amp, single phase transformer.

Lot ID: MA742

Hendor Stainless Steel Multi Port Cartridge Filter Housing

This unit is a robust, compact and a reliable filter housing unit. Stainless Steel housings are suitable for all liquids classified as Group 2 this fluid group is as defined in the European Pressure Equipment Directive 97/23/EC.

Lot ID: MB768

SUEZ Water Purification Systems Purite Multi Stage Water Treatment Plant

An immaculate, unused water treatment system including reverse osmosis, ion exchange and UV filtration system, to supply high quality water to laboratories and small capacity chemical plants which require high levels of purity and cleanliness.

Lot ID: TY243

Canning Model 1612, Double Ended Polishing Lathe - Motor Only

The Canning 1612 polishing machine is a traditionally built, heavy duty manual polishing machine renowned for its durability, reliability, and long service life. Primarily designed for use with polishing mops, buffs and bobs.

Lot ID: DPS520

BVC (Quirepace) S6 Air Blower

The BVC Quirepace S6/66 Air Blower is a robust British-engineered blower designed to deliver a consistent supply of warm, dry, non-pulsating air, with a maximum capacity of 356 CFM (605 m³/hr).

Lot ID: DPS170

Techware-II Ultra

Cabinet with Techware-II Ultra, Lakeshore 819 Cryopump Monitor and monitor.

Lot ID: BID 677

CTI 9600 Helium Compressor

CTI 9600 Helium Compressor

Lot ID: BID 678

Two Airless Shot Blast Turbines and Motors

Two Airless Shot Blast Turbines and Motors

Lot ID: BID 682

Pallet of Flexible and Fixed Ducting

Pallet of Flexible and Fixed Ducting

Lot ID: BID 683

Two Airless Shot Blast Turbines and Motors

Two Airless Shot Blast Turbines and Motors

Lot ID: BID 684

Fiorentini Ecomini 430 Electric Floor Washer

The Fiorentini Ecomini 430 Electric is a compact 3-in-1 professional floor washer, dryer, and vacuum designed for small and confined spaces

Lot ID: BID 685

Dust Extraction Arm

Dust Extraction Arm

Lot ID: BID 686

Dust Extraction Arm and Ducting

Dust Extraction Arm and Ducting

Lot ID: BID 687

Dust Extraction Arm

Dust Extraction Arm

Lot ID: BID 688

Pallet of Pumps and Motors

Pallet of Pumps and Motors

Lot ID: BID 689

Lee Laser 825TQ/CE

The Lee Laser 825TQ/CE is an industrial-grade, lamp-pumped Nd:YAG solid-state laser system. Manufactured by Lee Laser, Inc. (which later became part of Coherent), this specific model series is heavily utilized in micro-machining, wafer scribing, trimming, and precision cutting applications.

Lot ID: BID 673

Lee Laser 712TQ

The Lee Laser Model 712TQ is a single-lamp pumped solid-state Nd:YAG laser system typically used for industrial precision marking, engraving, trimming, and wafer scribing.

Lot ID: BID 674

Rofin Stardisc HP

The Rofin StarDisc HP is a high-power, disk-based industrial laser system designed by Rofin-Baasel (now part of Coherent) for high-precision material processing like cutting, welding, and drilling

Lot ID: BID 676

Rofin SC Disc 100 ICQ

The Rofin StarCut 100 SC-100 ICQ YAG disc laser system designed for precision industrial cutting, drilling, and structuring

Lot ID: BID 675