skip to main content

Riley Surface World uses cookies to give you the best experience on our website. If you continue we assume that you consent to receive cookies on our website. Read More

X
Machines & equipment for sale

Lanemark Combustion Engineering Ltd Burner FDGAN-3 Natural Gas Burner

Auction

Top Bid [?]
£
Reserve
Bidding closes [?]
()
Buyer's Premium [?]
12.5% BP will be added to your invoice
Buy Now Price [?]
£ 50 (+ VAT)
Loading Contribution [?]
£ 50 (+ VAT)
Part of an Auction
Warehouse Clearance

Login or Register to Buy Now

Place your bid

Your Bid [?]
£
Bid Now
OR
Your Max Bid (optional)[?]
£ You haven't set a maximum bid
Bid Now
Lot ID
OD2504
Manufacturer
Lanemark Combustion Engineering Ltd
Model
FD15C(GA)N-3 (TBC)
Year of Manufacture
c. 2013
Condition
From a working environment, Good Condition, Current Model
Capacity
Heat input 2,250,000Btu/h 660kW (TBC)
Process Application
Gas Powered Heating
Other Info
Natural Gas : Train Type VCV2 230V (TBC)
Location
Warehouse Clearance
Delivery
Your delivery options

Description

The FD range of burners are forced draught burners designed for industrial process air heating requirements. Short flame lengths, exceptional flame stability and accurate turndown as low as 9 kW (30,000 Btu/h) are achieved by the unique Lanemark cone design combustion head.

The burner’s combustion air fan is generally designed to run continuously when the oven is in use or alternatively it can it can be energised from the burner’s controller to run only when the burner is required to run. The fan motor electrical supply is made via an isolator, contactor and motor overload normally provided by others in the main site motor control panel. Alternatively Lanemark can supply and fit these components.

A fan motor isolation switch is fitted inside the burner control panel as standard. The burner is painted blue and is suitable for mounting directly onto the side of the oven or for down firing as required.

Requirements

The burner must be installed in accordance with the following regulations:-

  • I.E.E Regulations (BS7671) Local Gas Service Area Recommendations
  • BS5440 Part 1 Specification for Installation of Flues
  • BS2915 Specification for Bursting Discs and Bursting Disc Devices
  • BS5440 Part 2 Specification for Installation of Ventilation for Gas Appliances
  • BS6644 Installation of Gas Fired Boilers between 60kW and 2MW
  • British Gas IM/30 Code of Practice for Gas Fired Process Plant 
  • British Gas IM/11 Flues for Commercial and Industrial Gas Fired Boilers and Air Heaters 
  • British Gas IM/12 Use of Gas in High Temperature Plant 
  • British Gas IM/18 Use of Gas in Low Temperature Plant 
  • LPGA COP9 LPG Air Plant 
  • LPGA COP17 Purging 
  • LPG Vessels and Systems 
  • IGE/UP/1 Soundness Testing and Purging Of Industrial and Commercial Gas Installations 
  • IGE/UP/4 Commissioning Of Gas Fired Plant on Industrial and Commercial Premises 
  • IGE/UP/2 Gas Installation Pipe work, Boosters and Compressors on Industrial and Commercial Premises 
  • Health and Safety Executive HS (g) 16 Evaporating and Other Ovens 
  • DETR Good Practice Guide Selecting and Specifying New Paint Plant and Stoving Ovens 
  • For some applications the discharge of flue gas into the atmosphere may be controlled and it is the responsibility of the owner to obtain permission from Local or National Government Departments as required.

Specification

  • Natural gas
  • Heat input: 2,250,000Btu/h 660kW (TBC)
  • Max inlet pressure: 100mbar.(TBC)
  • Min inlet pressure: 20mbar.(TBC)
  • Control supply: 230V, single phase 50 Hz.
  • Fan supply: 230V, 3 phase, 50 Hz

N.B. There is no manufacturers label on this equipment so there are specification details that need to be confirmed. Please see items OD2502 and OD2503

pdf icon Print / Download Lanemark Combustion Engineering Ltd Burner FDGAN-3 Natural Gas Burner Datasheet

Auction Lots Descriptions and photographs are provided in good faith but may not be correct. It is the Customer's responsibility to ensure that the machinery is fit for the purpose for which it is purchased and safe for the purpose of use at work via physical inspection. All sales are deemed to be 'as inspected' and 'as is, in situ' even if the customer has waived the right to inspect.