Warehouse Clearance
You can seize the opportunity to buy from 100's of pieces of stock being genuinely cleared from Riley Surface World's warehouse, right now.
Exciting changes are coming to our catalogue of machinery and we need to clear space to make room.
- Buy Now to beat everyone to the lot - all prices are the lowest they have been
- Wishlist your favourite lots and Bid on 30-31st September.
Lots will be loaded to suitable transport, by appointment, or ask fora delivery quote.
CSC Terruggia 2000 Litre Air Receiver
2000 Litre air receiver made at CSC Terruggia, Italy. Pressure testing will be required before use.
- Lot ID
- AE202
- Category
- Associated Air Compressor Equipment
- Model
- CSC Terruggia 2000 Litres
- CFM/Kw
- N/A
- Compressor Type
- N/A
- Other Info
- Test pressure: 17.2bar
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ 20 (+ VAT)
- Bidding closes [?]
- 30 September 2026 13:00 GMT
- Part of an Auction
- Warehouse Clearance
Gardner Denver Variable Speed Heavy Duty Industrial Air Compressor
The Gardener Denver VS series of enclosed regulated speed compressors provide a variable speed offering in a compact enclosed format. Last serviced August 2018 (see report attached) Run Hours 73948.
- Lot ID
- AY178J
- Category
- Air compressors
- Model
- Gardner Denver VS70 EANA
- CFM/Kw
- 410 / 76kW
- Compressor Type
- Oil filled twin screw compressor
- Other Info
- Variable speed compressor
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:04 GMT
- Part of an Auction
- Warehouse Clearance
ABB Bonfiglioli W Series Motor Gearbox
Bonfiglioli W Series Motor Gearbox
- Lot ID
- BID 624
- Category
- Miscellaneous
- Model
- ABB 3G2C16
- Process Application
- High Torque Slow Speed Drive
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:06 GMT
- Part of an Auction
- Warehouse Clearance
Baltimore Aircoil Company VTL-E 059-H Cooling Tower
Little used Baltimore Aircoil Company model VTL-E 059-H is an open circuit cooling tower rated at 497kW, designed to operate in conjunction with equipment such as cooling towers to ensure water remains free of water-borne bacteria. £9450 when purchased Brand New in 2016.
- Lot ID
- CC637
- Category
- Associated Heat Exchangers & Cooling Equipment
- Model
- Baltimore Aircoil Company Bac VTL-E 059-H
- Ave. cooling capacity
- 497 Kw
- Ave. Water Flow Rate
- 6.4L/S
- Other Info
- low height requirements Indoor installs
- Condition
- Unused, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:08 GMT
- Part of an Auction
- Warehouse Clearance
Industrial Cooling Systems (ICS) TAE EVO 020 Chiller
This De-Gasses frigerated air packaged cooler is an ICS TAE 020 Evo Tech. Designed specifically for industry, well suited to guarantee a secure and repeatable production process, while saving money and protecting the environment.
- Lot ID
- CD650
- Category
- Air Cooled Chillers & Refrigeration
- Model
- Industrial Cooling Systems (ICS) TAE EVO 020
- Ave. cooling capacity
- 9.5kW @ 15°C cwlt // 6.3kW @ 6.3°C cwlt
- Ave. Water Flow Rate
- 0.5 - 4.8 m3hr
- Other Info
- Professionally Degassed by Evolution.
- Condition
- Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:10 GMT
- Part of an Auction
- Warehouse Clearance
BEL Very Heavy Duty Aqueous Top or End Loading Spray Wash Machine
This is a very heavy duty, large capacity, 360° twin traversing aqueous spray wash machine designed to wash parts with hot, high pressure cleaning fluid. Also fitted with a manual spray lance. Load from the top or the side through fully opening and closing sealed doors.
- Lot ID
- DA1388
- Category
- Spray & Jet Cleaning
- Model
- BEL Traversing 360° Spray Booms
- Work Envelope (WxDxH mm) [?]
- 2800 x 600 x 600
- Process Stages
- Single Stage plus Manual Spray Lance
- Other Info
- Designed to Clean Large Engine Blocks
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:12 GMT
- Part of an Auction
- Warehouse Clearance
Technowash Single Stage Gas Fired Through Feed Basket Spray Wash
The Technowash 1250 has been designed to specifically accommodate the heavier loads and where the level of component surface contamination is high.
- Lot ID
- DA1392
- Category
- Spray & Jet Cleaning
- Model
- Technowash AQF 1250
- Work Envelope (WxDxH mm) [?]
- 1770 x 870 Max.
- Process Stages
- Single Batch Straight Through Process
- Other Info
- Gravity fed through feed roller conveyor
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:14 GMT
- Part of an Auction
- Warehouse Clearance
Kerry ( Guyson International ) Kerry Ultrasonic Compact 300A/4
This second-hand Guyson International Kerry 300A/4 multi stage Ultrasonics cleaning system offers a rapid and highly effective method of precision cleaning components to a very high standard.
- Lot ID
- DA1397
- Category
- Aqueous Ultrasonic Cleaning & Washing
- Model
- Kerry ( Guyson International ) compact 300A/4
- Work Envelope (WxDxH mm) [?]
- 250 x 350 x 400
- Process Stages
- 4 Stage, 3 wet + hot air dry
- Other Info
- max temp 70°C wash and 100°C Dry
- Condition
- From a working environment
- Location
- Rolls Royce Stores Unit 6
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:16 GMT
- Part of an Auction
- Warehouse Clearance
Ryeford Engineering Stainless Steel Ardrox 311 Oiling Line with Pall Dewatering Filter System & Solution Cooling.
Stainless steel cleaning tank for Ardrox 311 Oiling Line including Pall Fluid de-watering and conditioning purifier, solution cooling system, lip extraction, bunded and draining station.
- Lot ID
- DA1413
- Category
- Process Tanks
- Model
- Ryeford Engineering Pall Fluid Conditioning Purifier HNP006
- Work Envelope (WxDxH mm) [?]
- Baskets 510 x 510 x 250 with 3 mesh
- Process Stages
- Oiling, De-watering and Cooling
- Other Info
- Bunded, lip extraction, drain station
- Condition
- Seen working by RSW, Excellent Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:18 GMT
- Part of an Auction
- Warehouse Clearance
D and S Ultraclean (ICI) Cleanfast DLS Model E165V Vapour Degreaser
A used stainless steel, semi-automatic, enclosed solvent vapour degreaser plant from the ICI range of cleaning machines. Degreaser used with Perchloroethylene. Double lid.
- Lot ID
- DB1458
- Category
- Solvent Vapour Cleaning
- Model
- D and S Ultraclean (ICI) Cleanfast DLS Model E165V
- Work Envelope (WxDxH mm) [?]
- 500 x 500 x 700 s.w.l.30kg Max. Load.
- Process Stages
- 2 Stage Liquid immersion vapor rinse/dry
- Other Info
- Automatic cleaning cycle EPA PP6/23 Comp
- Condition
- From a working environment, Good Condition, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:20 GMT
- Part of an Auction
- Warehouse Clearance
ICI Special Cleanfast DLS E265V Enclosed Low Emission Solvent Degreasing Plant
ICI E265V Special vapour degreasing plant, carrier size of 900mm x 450mm x 550mm (H) offers a compliant solvent vapour phase cleaning cycle in a single operation. Complete with a unique ICI double lid sealing system, this immersion single-stage process tank can also be used with any wet process requiring fume extraction.
- Lot ID
- DC1509
- Category
- Solvent Vapour Cleaning
- Model
- ICI E265V
- Work Envelope (WxDxH mm) [?]
- Carrier - 1100 x 530 x 500
- Process Stages
- Single stage vapour degreaser
- Other Info
- Low consumption plant. 250Kg SWL
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:22 GMT
- Part of an Auction
- Warehouse Clearance
Vixen JW99 Top loading Spray Washer
The Vixen Jetwash JW99 is a stainless steel lined cellular type rotary hot wash spray machine, which uses towns water and any number of available environmentally friendly detergents. Spray jets fitted around the basket are supplied by the pump and wash the components from all angles as they rotate.
- Lot ID
- DF1623
- Category
- Spray & Jet Cleaning
- Model
- Vixen JW99
- Work Envelope (WxDxH mm) [?]
- 950 x 270 x 400mm
- Process Stages
- Single Stage
- Other Info
- Hot detergent washing machine
- Condition
- Seen working by RSW, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:24 GMT
- Part of an Auction
- Warehouse Clearance
Pura 2000 Clean Air Work Station
Pura's 2000 line of Horizontal Laminar Flow Clean Air Work Stations are engineered to enhance the performance of the cabinet and the overall airflow efficiency of the cleanroom.
- Lot ID
- EA1813
- Category
- Dry Dust Filters
- Model
- Pura Pura 2000
- Approx Duty CFM / M³/Hr
- 600
- Filter Area ft² / m²
- 1170 x 600 x 570 work area
- Other Info
- Especially Designed for clean room use
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:26 GMT
- Part of an Auction
- Warehouse Clearance
Fettling Bench
Metal frame fettling table with down draft dust extraction capability and a 4" wide, Record swivel engineering Vice fitted centrally.
- Lot ID
- EA1885S
- Category
- Miscellaneous
- Other Info
- 840 x 640 extract
- Condition
- From a working environment
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:28 GMT
- Part of an Auction
- Warehouse Clearance
Fettling Bench
Metal frame fettling table with down draft dust extraction capability. Inset metal grid 840mm x 640mm fitted in a wooden tabletop.
- Lot ID
- EA1886S
- Category
- Miscellaneous
- Other Info
- 840 x 640 extract
- Condition
- From a working environment
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:30 GMT
- Part of an Auction
- Warehouse Clearance
Lakestyle Downdraft Bench
Lakestyle Down Draft Fettling Booth for the control of dusts from manual grinding, fettling, fiberglass and composite materials trimming type operations.
- Lot ID
- EA1893
- Category
- Associated Dust Control Equipment
- Model
- Lakestyle 18 DD S
- Other Info
- 850 x 640 Grill dims
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:32 GMT
- Part of an Auction
- Warehouse Clearance
Filtex FX294 Configured For Oil Mist plus Air Streams with Debris
This second hand FX 294 H 5.5 kW extraction unit is currently set up for oil mist extraction and comes without a shaker motor.
- Lot ID
- EB1909
- Category
- Wet Dust Filters
- Model
- Filtex FX294 VH
- Approx Duty CFM / M³/Hr
- 2000 // 3500 ( see chart )
- Filter Area ft² / m²
- 294 // 27.30m2
- Other Info
- Set up for Oil Mist + Debris Extraction
- Condition
- Good Condition, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:34 GMT
- Part of an Auction
- Warehouse Clearance
Bioair 1.2 Safeflow Microbiological Safety Cabinet
SafeMate Eco+ ABC is a “Vertical Laminar Airflow with Partial Recirculation” cabinet which provides three areas of protection. First for the operator, second for the environment and third for the product. A class II biological safety cabinet to AS 2252.2—2009
- Lot ID
- EB1921
- Category
- Associated Dust Control Equipment
- Model
- Bioair Safeflow 1.2-BS
- Approx Duty CFM / M³/Hr
- Exhaust air flow 550M3/Hr
- Filter Area ft² / m²
- 1219 x 610 x 68mm (LAF filters)
- Other Info
- Class II Biological Safety Cabinet
- Condition
- Excellent Condition, Current Model, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:36 GMT
- Part of an Auction
- Warehouse Clearance
Bioair 1.2 Safeflow Microbiological Safety Cabinet
SafeMate Eco+ ABC is a vertical Laminar airflow with partial recirculation cabinet which provides three areas of protection. Firstly for the operator, second for the environment and 3 for the product. A class II biological safety cabinet to AS 2252.2—2009
- Lot ID
- EB1922
- Category
- Associated Dust Control Equipment
- Model
- Bioair Safeflow 1.2 BS
- Approx Duty CFM / M³/Hr
- Exhaust air flow 550M3/Hr
- Filter Area ft² / m²
- 1219 x 610 x 68mm (LAF filters)
- Other Info
- Class II Biological Safety Cabinet
- Condition
- Excellent Condition, Current Model, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:38 GMT
- Part of an Auction
- Warehouse Clearance
Bioair 1.2 Safeflow Microbiological Safety Cabinet
SafeMate Eco+ ABC is a vertical Laminar airflow with partial recirculation cabinet which provides three areas of protection. Firstly for the operator, second for the environment and 3 for the product. A class II biological safety cabinet to AS 2252.2—2009
- Lot ID
- EB1924
- Category
- Associated Dust Control Equipment
- Model
- Bioair Safeflow 1.2-BS
- Approx Duty CFM / M³/Hr
- Exhaust air flow 550M3/Hr
- Filter Area ft² / m²
- 1219 x 610 x 68mm (LAF filters)
- Other Info
- Class II Biological Safety Cabinet
- Condition
- Excellent Condition, Current Model, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:40 GMT
- Part of an Auction
- Warehouse Clearance
Bioair 1.2 Safeflow Microbiological Safety Cabinet
SafeMate Eco+ ABC is a vertical Laminar airflow with partial recirculation cabinet which provides three areas of protection. Firstly for the operator, second for the environment and 3 for the product.
- Lot ID
- EB1940
- Category
- Associated Dust Control Equipment
- Model
- Bioair Safeflow 1.2-BS
- Approx Duty CFM / M³/Hr
- Exhaust air flow 550M3/Hr
- Filter Area ft² / m²
- 1219 x 610 x 68mm (LAF filters)
- Other Info
- Class II Biological Safety Cabinet
- Condition
- Excellent Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:42 GMT
- Part of an Auction
- Warehouse Clearance
Vokes Oil Mist Air Filter Unit
A heavy duty industrial air cleaner for effectively separating oil mists, oil fumes and emulsion mists during continuous operations. There are three filter stages with differential pressure gauges at each step. The first filter is washable, which reduces operating costs.
- Lot ID
- EB1984
- Category
- Fume Extraction Fans & Scrubbers
- Model
- Vokes Scand-mist MA400D
- Approx Duty CFM / M³/Hr
- 2354/4000
- Other Info
- Inlet Ø300mm : 7.5 Kw
- Condition
- From a working environment, Excellent Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:44 GMT
- Part of an Auction
- Warehouse Clearance
Zubler V7000 Dust Collector
Zubler single suction units are highly versatile, used for a wide range of low dust and fume applications, and ideal for use in dental laboratories.
- Lot ID
- EC2040
- Category
- Dry Dust Filters
- Model
- Zubler V7000
- Approx Duty CFM / M³/Hr
- 53-80 // 90-135 @ 34 in wg // 85mbar
- Filter Area ft² / m²
- 43 + 75 // .4 + .7
- Other Info
- Suction of 20-40 L/S
- Condition
- Excellent Condition, Unused, Current Model, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:46 GMT
- Part of an Auction
- Warehouse Clearance
Zubler V7000 Dust Collector
Zubler single suction units are highly versatile, used for a wide range of low dust and fume applications, and ideal for use in dental laboratories.
- Lot ID
- EC2041
- Category
- Dry Dust Filters
- Model
- Zubler V7000
- Approx Duty CFM / M³/Hr
- 53-80 // 90-135 @ 34 in wg // 85mbar
- Filter Area ft² / m²
- 43 + 75 // .4 + .7
- Other Info
- Suction of 20-40 L/S
- Condition
- Excellent Condition, Unused, Current Model, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:48 GMT
- Part of an Auction
- Warehouse Clearance
Zubler V7000 Dust Collector
Zubler single suction units are highly versatile, used for a wide range of low dust and fume applications, and ideal for use in dental laboratories.
- Lot ID
- EC2042
- Category
- Dry Dust Filters
- Model
- Zubler V7000
- Approx Duty CFM / M³/Hr
- 53-80 // 90-135 @ 34 in wg // 85mbar
- Filter Area ft² / m²
- 43 + 75 // .4 + .7
- Other Info
- Suction of 20-40 L/S
- Condition
- Excellent Condition, Unused, Current Model, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:50 GMT
- Part of an Auction
- Warehouse Clearance
Quirepace Ltd BVC Heavy Duty Industrial Vacuum Cleaner
The VV182 is a small static industrial vacuum cleaner designed for special applications where the principal requirement is for air vacuum, but where there may be some material contamination of the air. The VV182 combines a 20 litre collection drum with a powerful multistage vacuum pump, 3ph operation.
- Lot ID
- ED2169
- Category
- Miscellaneous
- Model
- Quirepace Ltd VV182
- Capacity
- 20 Litres
- Process Application
- Dry Dust & Large Particle Filter Vacuum
- Other Info
- 415volt, 3 phase Fluid Pump and Filter
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:52 GMT
- Part of an Auction
- Warehouse Clearance
Tongbao Free Standing Air Handling None Powered Dust Filter Plant
A stand alone venting unit ideal for inclusion in a dust extraction system to add additional capacity or give an existing process enhanced environmental and operator safety benefits. Manual shaker sock cleaning mechanism. (Please ask for details of suitable fans we have in stock to go with this unit)
- Lot ID
- EE2200
- Category
- Dry Dust Filters
- Model
- Tongbao Venting Unit
- Approx Duty CFM / M³/Hr
- Fan Dependent
- Filter Area ft² / m²
- 180ft2 // 17.66m2
- Other Info
- inlet 200mm outlet 210
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:54 GMT
- Part of an Auction
- Warehouse Clearance
Nederman Dantherm NC Passive Cyclone
The Nederman NC range cyclone is a separator that uses centrifugal force to purify airstreams loaded with bulk loose debris such as chips, trimmings or dusts.
- Lot ID
- EE2204
- Category
- Associated Dust Control Equipment
- Model
- Nederman NC
- Approx Duty CFM / M³/Hr
- 4000 6800
- Filter Area ft² / m²
- N/A
- Other Info
- Pre-separation cyclone
- Condition
- From a working environment
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:56 GMT
- Part of an Auction
- Warehouse Clearance
Draper Portable 1200W Extraction Unit
Capable of extracting small to medium particles, ideal for a small toolroom or work shop.
- Lot ID
- EE2229
- Category
- Dry Dust Filters
- Model
- Draper 45 L - 1200W
- Approx Duty CFM / M³/Hr
- 117CFM // 200m3/Hr
- Filter Area ft² / m²
- 1.15ft2 // 0.11m2
- Other Info
- Portable Unit
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 13:58 GMT
- Part of an Auction
- Warehouse Clearance
Nederman Modular Filter System (MFS) with Hepa Filter
The Modular Filter System (MFS) offers a simple and efficient clean air solution for light industrial and commercial processes that generate smoke, dust, fume gases and odours. Conveniently mounts to a wall/work station saving floor space, add extraction arms and fans to capture pollutants right at the source protecting workers breathing zones.
- Lot ID
- EE2238
- Category
- Dry Dust Filters
- Model
- Nederman MFS
- Approx Duty CFM / M³/Hr
- 470 CFM // 800M2/Hr
- Filter Area ft² / m²
- 151ft2 // 14M2
- Other Info
- 4 Types of Replacement Filters Available
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:00 GMT
- Part of an Auction
- Warehouse Clearance
Nederman Modular Filter System (MFS) with Hepa Filter
The Modular Filter System (MFS) offers a simple and efficient clean air solution for light industrial and commercial processes that generate smoke, dust, fume gases and odours. Conveniently mounts to a wall/work station saving floor space, add extraction arms and fans to capture pollutants right at the source protecting workers breathing zones.
- Lot ID
- EE2239
- Category
- Dry Dust Filters
- Model
- Nederman MFS
- Approx Duty CFM / M³/Hr
- 470 CFM // 800M2/Hr
- Filter Area ft² / m²
- 151ft2 // 14M2
- Other Info
- 4 Types of Replacement Filters Available
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:02 GMT
- Part of an Auction
- Warehouse Clearance
Filtex FX250 H Dust Extractor with Explosion Relief Panel
This FX250 H, self-contained, high-efficiency compact dust extractor features a integrated fan, motor and filter assemblies with mechanical shaking for effortless cleaning. Built for safety and performance, it also includes a explosion relief panel.
- Lot ID
- EE2256
- Category
- Dry Dust Filters
- Model
- Filtex FX250H
- Approx Duty CFM / M³/Hr
- 2000cfm @ 7" swg // 5100m3/hr @178mm
- Filter Area ft² / m²
- 250 // 25
- Other Info
- 5.5Kw // 7.5Hp, Explosion Relief Panel
- Condition
- From a working environment, Excellent Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:04 GMT
- Part of an Auction
- Warehouse Clearance
Filtex Dust Extractor with Explosion Relief Panel
Upgrade your dust extraction process with this compact, self-contained FX 250 H unit, complete with fans and filter media for automatic or manual cleaning and collection. Powered by a 5.5kW / 7.5Hp motor, this versatile fine dust filter handles a wide range of dust types across multiple applications and includes a built-in explosion relief panel.
- Lot ID
- EE2257
- Category
- Dry Dust Filters
- Model
- Filtex FX250
- Approx Duty CFM / M³/Hr
- 2000CFM @ 7"swg // 3400m3/h @ 178mm
- Filter Area ft² / m²
- 250 // 25
- Other Info
- 5.5kw, 7.5HP, Explosion Relief Panel
- Condition
- From a working environment
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:06 GMT
- Part of an Auction
- Warehouse Clearance
Fixed Height Fettling Bench with Lighting
Down Draft Fettling Booth for the control of dusts from manual grinding, fettling, fiberglass and composite materials trimming, type operations.
No work table or grille included.
- Lot ID
- EY1694
- Category
- Associated Dust Control Equipment
- Model
- Heavy duty downdraft bench
- Approx Duty CFM / M³/Hr
- Heavy work surface can take 250 kg load
- Filter Area ft² / m²
- Numerous dust capture workstation
- Other Info
- No work table included
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:08 GMT
- Part of an Auction
- Warehouse Clearance
Duscovent Cyclonic Dust Extractor with Reverse Pulse Cleaning
A small compact stand alone dust extraction unit with reverse pulse jet cleaning. (No fan)
- Lot ID
- EY1726
- Category
- Dry Dust Filters
- Model
- Duscovent SFC 035
- Filter Area ft² / m²
- 43 ft2 // 4M2
- Condition
- Good Condition, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:10 GMT
- Part of an Auction
- Warehouse Clearance
Slee of London Clean Air Cabinet
A laminar flow cabinet is a carefully enclosed bench designed to prevent contamination of semiconductor wafers, biological samples, or any particle sensitive materials. Air is drawn through a HEPA filter and blown in a very smooth, laminar flow towards the user.
- Lot ID
- EZ1768
- Category
- Associated Dust Control Equipment
- Model
- Slee of London Laminar Flow Work Station - 4 HLF
- Approx Duty CFM / M³/Hr
- 150Ft/Min.
- Filter Area ft² / m²
- HEPA Filters
- Other Info
- Contamination Free Enclosed Bench
- Condition
- Good Condition, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:12 GMT
- Part of an Auction
- Warehouse Clearance
Dust Control Systems Ltd Floor Mounted High Volume Fan and 22kW / 25Hp Motor
A high volume fan powered by a 22kW / 25hp motor and a flow rate of 5.55m3/sec will be sufficient to cover most applications. Complete with an acoustic booth and electrical control panel
- Lot ID
- FA126
- Category
- Associated Dust Control Equipment
- Model
- Dust Control Systems Ltd SWSI BFN 900 100-80
- Approx Duty CFM / M³/Hr
- 11759 / 19980
- Filter Area ft² / m²
- Fan Pressure 2600Pa : Flow of 5.55M3/Sec
- Other Info
- Complete with Electrical Control Panel
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:14 GMT
- Part of an Auction
- Warehouse Clearance
Fan Engineering Floor Mounted Large Capacity Multivane Fan
Floor mounted multivane forward curved fans are designed primarily for heating & ventilating applications. They handle clean air, have medium peak efficiency and an overloading power characteristic.
- Lot ID
- FC134S
- Category
- Associated Dust Control Equipment
- Model
- Fan Engineering Multivane Forward Curved
- Approx Duty CFM / M³/Hr
- c. 20000 cfm // 33900M3/Hr
- Filter Area ft² / m²
- Multiple mixed filter cassettes
- Other Info
- Belt Driven Via 11kW /15Hp Motor
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:16 GMT
- Part of an Auction
- Warehouse Clearance
Fan Engineering 3 Phase Induction Motor Driven Fan with Impellor
A Multivane plug fan with an induction driven motor mounted into a fixing plate. Direct drive, Ideal for air circulation within a ducting set up or other application where air circulation is required.
- Lot ID
- FD141
- Category
- Fume Extraction Fans & Scrubbers
- Model
- Fan Engineering Multivane Plug Fan
- Approx Duty CFM / M³/Hr
- TBC
- Filter Area ft² / m²
- N/A
- Other Info
- Direct Drive, Plate Mounted.
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:18 GMT
- Part of an Auction
- Warehouse Clearance
Fan Engineering 4kw Fan with Impellor
A Multivane plug fan with a 4kW (5.4Hp) motor mounted into a fixing plate. Direct drive, Ideal for air circulation within a ducting set up or other application where air circulation is required.
- Lot ID
- FD142
- Category
- Fume Extraction Fans & Scrubbers
- Model
- Fan Engineering Multivane Plug Fan
- Approx Duty CFM / M³/Hr
- TBC
- Filter Area ft² / m²
- N/A
- Other Info
- Direct Drive, Plate Mounted.
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:20 GMT
- Part of an Auction
- Warehouse Clearance
Fan Engineering 5.5kw Fan with Impellor
A Multivane plug fan with a 5.5kW (7.3Hp) motor mounted into a fixing plate. Direct drive, Ideal for air circulation within a ducting set up or other application where air circulation is required.
- Lot ID
- FD143
- Category
- Fume Extraction Fans & Scrubbers
- Model
- Fan Engineering Multivane Plug Fan
- Approx Duty CFM / M³/Hr
- TBC
- Filter Area ft² / m²
- N/A
- Other Info
- Direct Drive, Plate Mounted.
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:22 GMT
- Part of an Auction
- Warehouse Clearance
Fan Engineering 5.5kw Fan with Impellor
A Multivane plug fan with a 5.5kW (7.3Hp) motor mounted into a fixing plate. Direct drive, Ideal for air circulation within a ducting set up or other application where air circulation is required.
- Lot ID
- FD144
- Category
- Fume Extraction Fans & Scrubbers
- Model
- Fan Engineering Multivane Plug Fan
- Approx Duty CFM / M³/Hr
- TBC
- Filter Area ft² / m²
- N/A
- Other Info
- Direct Drive, Plate Mounted.
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:24 GMT
- Part of an Auction
- Warehouse Clearance
Fan Engineering 4kw Fan with Impellor
A Multivane plug fan with a 4kW (5.4Hp) motor mounted into a fixing plate. Direct drive, Ideal for air circulation within a ducting set up or other application where air circulation is required.
- Lot ID
- FD145
- Category
- Fume Extraction Fans & Scrubbers
- Model
- Fan Engineering Multivane Plug Fan
- Approx Duty CFM / M³/Hr
- TBC
- Filter Area ft² / m²
- N/A
- Other Info
- Direct Drive, Plate Mounted.
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:26 GMT
- Part of an Auction
- Warehouse Clearance
Fan Engineering 5.5kw Fan with Impellor
A Multivane plug fan with a 5.5kW (7.3Hp) motor mounted into a fixing plate. Direct drive, Ideal for air circulation within a ducting set up or other application where air circulation is required.
- Lot ID
- FD146
- Category
- Fume Extraction Fans & Scrubbers
- Model
- Fan Engineering Multivane Plug Fan
- Approx Duty CFM / M³/Hr
- TBC
- Filter Area ft² / m²
- N/A
- Other Info
- Direct Drive, Plate Mounted.
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:28 GMT
- Part of an Auction
- Warehouse Clearance
Fan Engineering 5.5kw Fan with Impellor
A Multivane plug fan with a 5.5kW (7.3Hp) motor mounted into a fixing plate. Direct drive, Ideal for air circulation within a ducting set up or other application where air circulation is required.
- Lot ID
- FD147
- Category
- Fume Extraction Fans & Scrubbers
- Model
- Fan Engineering Multivane Plug Fan
- Approx Duty CFM / M³/Hr
- TBC
- Filter Area ft² / m²
- N/A
- Other Info
- Direct Drive, Plate Mounted.
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:30 GMT
- Part of an Auction
- Warehouse Clearance
Dry Filter Bench Spray Booth
This bench level spray booth operates under the same principle as full size booth but with a work surface at a convenient height to allow the painting of small components.
- Lot ID
- GA845
- Category
- Associated Dust Control Equipment
- Model
- Bench Level Spray Booth
- Approx Duty CFM / M³/Hr
- Extractor dependent to contain overspray
- Filter Area ft² / m²
- 1m2
- Other Info
- Galvanized Steel Construction
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:32 GMT
- Part of an Auction
- Warehouse Clearance
Spray Coating Booth
Powder coating booth with hanging rail, internal light and outlet ducting for connection to suitable dust extraction unit.
- Lot ID
- GD866
- Category
- Powder coating, wet paint plant & equipment
- Model
- 1.5M³
- Work Envelope (WxDxH mm) [?]
- 1000mm x 1000mm x 1500mm
- Process Stages
- Single Stage
- Other Info
- Optional Extraction Point to LH Wall
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:34 GMT
- Part of an Auction
- Warehouse Clearance
Grundfos Vertical 6 Chamber High Pressure and Volume Centrifugal Pump
Vertical multistage high volume centrifugal pump designed for tank top mounting for pumping of washing applications or for pumping of cooling lubricants and cutting oils for machine tools.
- Lot ID
- MA695
- Category
- Miscellaneous
- Model
- Grundfos MG180MB2-48FF300-F1
- Capacity
- Flow rate 64m3/h at 25 Bar
- Process Application
- Aqueous Wash Plants
- Other Info
- Wetted Part Stainless Stainless
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:36 GMT
- Part of an Auction
- Warehouse Clearance
Newport Arc Lamp Power Supply 69920
Universal Arc Lamp Power Supply, 350W to 1000W.
- Lot ID
- MA702
- Category
- Miscellaneous
- Model
- Newport 69920
- Capacity
- 450W and 1000W
- Process Application
- Solar Simulators and light source supply
- Other Info
- RS232 interface
- Condition
- Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:38 GMT
- Part of an Auction
- Warehouse Clearance
Uniphase Helium - Neon Laser Beam Generator.
A Uniphase model 155A SL Laser, Visible red 632.8nm wavelength with a beam diameter of 0.88mm.
- Lot ID
- MA703
- Category
- Miscellaneous
- Model
- Uniphase 155A SL2
- Process Application
- Laser Light Emission
- Other Info
- Helium- Neon Laser
- Condition
- Good Condition, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:40 GMT
- Part of an Auction
- Warehouse Clearance
Hymo Hydraulic Scissor Lifting Platform
Hymo AXX 4 series lifting tables are modern, reliable devices whose main task is to effectively level the difference in levels in various types of work environments.
- Lot ID
- MA708
- Category
- Miscellaneous
- Model
- Hymo Hymo AXX 4
- Capacity
- 400Kgs
- Process Application
- Lifting and Raising of parts or tooling
- Other Info
- Table Size 1000 x 600/ Lift Stroke 800mm
- Condition
- Excellent Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:42 GMT
- Part of an Auction
- Warehouse Clearance
MecWash Aquasave A30 Water Processing Unit
A Mecwash Aquasave water recycling unit with pre-treatment heating and dosing unit. Ideal for adding into an existing washing facility to improve water quality, reduce costs plus it is beneficial for the environment.
- Lot ID
- MA710
- Category
- Associated Aqueous Cleaning
- Model
- MecWash A30
- Work Envelope (WxDxH mm) [?]
- N/A
- Process Stages
- Continuous
- Other Info
- Environmentally Friendly
- Condition
- Seen working by RSW, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:44 GMT
- Part of an Auction
- Warehouse Clearance
Dellmeco Double Diaphragm Pump
Dellmeco double diaphragm pump. 2" BSPP ported polyethylene body air operated pump with TFM diaphragms and PTFE valves. Max flow of 565 Litres per minute.
- Lot ID
- MA716
- Category
- Miscellaneous
- Model
- Dellmeco DM 50/565 PTT
- Capacity
- 565 L/Min // 33,900L/Hr
- Process Application
- Air Driven Liquid Pumping
- Other Info
- Ø2" BSP ports
- Condition
- From a working environment, Seen working by RSW, Good Condition, Current Model, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:46 GMT
- Part of an Auction
- Warehouse Clearance
Dellmeco Double Diaphragm Pump
Dellmeco double diaphragm pump. 2" BSPP ported polyethylene body air operated pump with TFM diaphragms and PTFE valves. Max flow of 565 Litres per minute.
- Lot ID
- MA717
- Category
- Miscellaneous
- Model
- Dellmeco DM 50/565 PTT
- Capacity
- 565 L/Min // 33,900L/Hr
- Process Application
- Air Driven Liquid Pumping
- Other Info
- 2" ports
- Condition
- From a working environment, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:48 GMT
- Part of an Auction
- Warehouse Clearance
FSP-Tech General Purpose Shower with Face / Eye Wash Station
General Purpose Emergency wash station. Unheated Shower Complete with Eyebath/ Facewash Fountain
- Lot ID
- MA735
- Category
- Miscellaneous
- Model
- FSP-Tech BasicLine
- Capacity
- 2.0 bar G minimum pressure
- Process Application
- Body Shower with Eye / Face Wash
- Other Info
- Ex Rolls Royce Engines
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:50 GMT
- Part of an Auction
- Warehouse Clearance
FSP-Tech General Purpose Shower with Face / Eye Wash Station
General purpose emergency wash station including unheated shower complete with eyebath/ facewash fountain.
- Lot ID
- MA736
- Category
- Miscellaneous
- Model
- FSP-Tech BasicLine
- Capacity
- 2.0 bar G minimum pressure
- Process Application
- Body Shower with Eye / Face Wash
- Other Info
- Ex Rolls Royce Engines
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:52 GMT
- Part of an Auction
- Warehouse Clearance
Jacquet Weston Engineering Packaged Demineralisation Water Treatment Plant
Manually operated, the de-mineralisation unit produces up to 200 l/h when connected to a 1,000 litre holding tank. At the estimated hourly production of 45 l/h demineralised water the unit will need regenerating every 75-80 hours.
- Lot ID
- MA748
- Category
- Electroplating & treatment lines
- Model
- Jacquet Weston Engineering Ion Exchange Plant
- Work Envelope (WxDxH mm) [?]
- Brake / Storage Tank Ø900 x 1500
- Process Stages
- Single Stage
- Other Info
- Producing up to 200 litres/hour
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:54 GMT
- Part of an Auction
- Warehouse Clearance
Hendor Pump and Spare Motor
This Hendor SS vertical pump is a single stage centrifugal immersion pump with a capacity of up to 20M3/Hr and a max head of 21M. Included is a spare motor.
- Lot ID
- MA762
- Category
- Miscellaneous
- Model
- Hendor D165-SS
- Capacity
- 20M3/hr // max head 21M
- Process Application
- Fluid Transfer
- Other Info
- Bearings PTFE 25% glass O rings EPDM
- Condition
- Excellent Condition, Current Model, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:56 GMT
- Part of an Auction
- Warehouse Clearance
Walther Trowal Magnetic Conveyor / Seperator
If your work pieces and abrasive media are roughly similar in size, then the external magnetic separation units from Trowal could be the ideal solution for precisely separating parts. This saves both time and money over manually screening your parts and media once it has left the system.
- Lot ID
- MB770
- Category
- Vibratory Deburring & Polishing Machines
- Model
- Walther Trowal Electro - Magnetic separator MS225 BL3400
- Capacity
- Track 200mm wide
- Type
- Electro-magnetic mag and de-mag
- Other Info
- Height adjustable between 1300 and 1500m
- Condition
- Seen working by RSW, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 14:58 GMT
- Part of an Auction
- Warehouse Clearance
Bemco Inc. 316 Stainless Steel Thermal Heating and Cooling Panel
A double plate stainless steel panel heating battery complete with manifold, fabricated and welded construction with 3/4"BSP entry and exit pipework.
- Lot ID
- MB772
- Category
- Miscellaneous
- Model
- Bemco Inc. Double Plate
- Capacity
- 1395 x 1100 x 2
- Process Application
- Cooling / Heating
- Other Info
- Suitable for Side Mounting
- Condition
- Excellent Condition, Unused, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:00 GMT
- Part of an Auction
- Warehouse Clearance
Bemco Inc. 316 Stainless Steel Thermal Heating and Cooling Panel
A triple plate stainless steel panel heating battery complete with manifold, fabricated and welded construction with 3/4"BSP entry and exit pipework.
- Lot ID
- MB773
- Category
- Miscellaneous
- Model
- Bemco Inc. Triple Plate
- Capacity
- 795 x 600 x 3
- Process Application
- Cooling / Heating
- Other Info
- Suitable for Side Mounting
- Condition
- Excellent Condition, Unused, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:02 GMT
- Part of an Auction
- Warehouse Clearance
Bemco Inc. 316 Stainless Steel Thermal Heating and Cooling Panel
A triple plate stainless steel Thermal and Cooling Panel complete with manifold, fabricated and welded construction with 3/4"BSP entry and exit pipework.
- Lot ID
- MB776
- Category
- Miscellaneous
- Model
- Bemco Inc. Triple Plate
- Capacity
- 795 x 600 x 3
- Process Application
- Cooling / Heating
- Condition
- Excellent Condition, Unused, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:04 GMT
- Part of an Auction
- Warehouse Clearance
Gardner Denver (Rietschie Thomas) Vacuum Pump
Gardner Denver Oil flooded rotary vane vacuum pump. Foot pedal or continuous operation.
- Lot ID
- MB780
- Category
- Miscellaneous
- Model
- Gardner Denver VCE15 (01) 1021440124
- Capacity
- 15M3/Hr : 10mbar (abs) 7.5 Torr
- Process Application
- Vacuum pumping
- Other Info
- Foot pedal or continuous operation.
- Condition
- Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:06 GMT
- Part of an Auction
- Warehouse Clearance
Buffalo Heavy Duty Planetary Mixer
The reliable 9 litre heavy duty planetary mixer from Buffalo. Has the ability to mix, beat and whisk easily. The powerful 550W motor and durable stainless steel bowl mean that this industrial planetary mixer is impressively strong and reliable. Interlocked safety cover and bowl height lifting handle.
- Lot ID
- MC859
- Category
- Miscellaneous
- Model
- Buffalo GL190 - 04
- Capacity
- 9 Litres
- Process Application
- Mixing
- Other Info
- Stainless Steel Mixings Bowls x 2 off
- Condition
- From a working environment, Excellent Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:08 GMT
- Part of an Auction
- Warehouse Clearance
Secomak Blower Unit
Secomak high-speed airflow blowers for heating and cooling. A reliable belt driven extremely energy efficient low maintenance compact unit for increasing air flow and pressure up to 98 mbar.
- Lot ID
- MC879
- Category
- Miscellaneous
- Model
- Secomak 428A
- Capacity
- up to 98mbar
- Process Application
- High Speed Air Flow Cooling and Heating
- Condition
- Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:10 GMT
- Part of an Auction
- Warehouse Clearance
Gast MFG Corp Regenerative Air Blower
Gast Manufacturing 'Regenair', regenerative blowers for vacuum or pressure generation.
- Lot ID
- MC885
- Category
- Miscellaneous
- Model
- Gast MFG Corp R5325A-2
- Capacity
- Vac 117mbar : Pressure 125mbar
- Process Application
- Vacuum or Pressure Generation
- Other Info
- Noise Level 75dB(A) Max.
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:12 GMT
- Part of an Auction
- Warehouse Clearance
Ebara Corporation Dry Vacuum Pump
The dry vacuum pump is a screw type consisting of a pair of rotating none contact rotors in the main pump and a booster pump and which are connected in series.
N2 gas and water cooling is required with the control circuit monitors multiple features during operation, having an earth leaker breaker and electro-magnetic switch.
- Lot ID
- MC888
- Category
- Miscellaneous
- Model
- Ebara Corporation AAS100WN
- Capacity
- Pumping speed 10000 Litres/Min
- Process Application
- Dry Vacuum Generation
- Other Info
- LCD Controller
- Condition
- From a working environment, Excellent Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:14 GMT
- Part of an Auction
- Warehouse Clearance
Centrotherm Gas Fume Scrubber
Centrotherm FLM Waste Gas Abatement System cleaning waste gas via burning, wet scrubbing and aerosol retention.
- Lot ID
- MC889
- Category
- Fume Extraction Fans & Scrubbers
- Model
- Centrotherm FLM E300K3 - HT
- Other Info
- Wet Scrubber
- Condition
- From a working environment, Excellent Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:16 GMT
- Part of an Auction
- Warehouse Clearance
Tutco Farnam Inline FT400 Process Heater
Flow Torch™ 400 is an open coil air heater designed for high flow rates at low pressure drop due to its efficient design with minimal flow restrictions. The robust construction of this 6” diameter stainless steel heater offers reliable long-life performance and reduced operational cost.
- Lot ID
- MC890
- Category
- Associated Heat Treatment Equipment
- Model
- Tutco Flow Torch™ 400 480-3-3T-3T-TF1
- Max Temp
- 482°c
- Other Info
- 5kw
- Condition
- From a working environment, Brand New, Current Model
- Location
- Royston, Cambridgeshire UK
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:18 GMT
- Part of an Auction
- Warehouse Clearance
Tutco Farnam Inline FT600 Process Heater
Flow Torch™ 600 is an open coil air heater designed for high flow rates at low pressure drop due to its efficient design with minimal flow restrictions. The robust construction of this 6” diameter stainless steel heater offers reliable long-life performance and reduced operational cost.
- Lot ID
- MC891
- Category
- Associated Heat Treatment Equipment
- Model
- Tutco Flow Torch™ 600 480-3-4T-4T-TF2
- Max Temp
- 482°c
- Other Info
- 11kw
- Condition
- From a working environment, Brand New
- Location
- Royston, Cambridgeshire UK
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:20 GMT
- Part of an Auction
- Warehouse Clearance
Aerogen Flame Treatment System
Flame treatment is a surface treatment process used to chemically modify a plastic container's surface for better label adhesion. This process uses specially designed equipment to create a controlled blend of natural gas and air that produces a flame.
- Lot ID
- MC892
- Category
- Associated Heat Treatment Equipment
- Model
- Aerogen FTAUTO-FC-ASSY-01
- Other Info
- Fuel - Natural Gas
- Condition
- From a working environment, Excellent Condition
- Location
- Royston, Cambridgeshire UK
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:22 GMT
- Part of an Auction
- Warehouse Clearance
Ryeford Engineering Cooling Plant
A stand alone process cooling unit. Designed to remove heat through a water circulation process where as generated heat is transferred into the flowing water, this heated water is then pumped by the integrated pump through a radiator where heat is released into the atmosphere, similar to that of a car engine cooling system.
- Lot ID
- MD899
- Category
- Associated Heat Exchangers & Cooling Equipment
- Model
- Ryeford Engineering Stand Alone
- Ave. cooling capacity
- Rad. size 280 x 50 x 340, 44 core tubes
- Ave. Water Flow Rate
- 35 Litres / Min
- Other Info
- Can be used with a chiller or solo
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Part of an Auction
- Warehouse Clearance
Kuka KR 120 R2700 extra HA Robot & KRC4 Controller
The extremely compact, 6-axis, KUKA KR 120 R2700 Extra HA robot is ideal for conquering those jobs that require high accuracy and extreme precision. Suitable for a variety of applications, including lasers, palletizing, assembly, spot welding, and more! The KUKA KR 120 R2700 features a 120 kg payload and +/-0.05mm repeatability. Little use.
- Lot ID
- MD901J
- Category
- Miscellaneous
- Model
- Kuka KR 120 R2700
- Capacity
- Reach 2696mm / Rated payload 120 kg
- Process Application
- Floor mounted - Number of axes 6
- Other Info
- Low run hours - 268
- Condition
- Seen working by RSW, Excellent Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:26 GMT
- Part of an Auction
- Warehouse Clearance
Ebara 3LM 65-125/5.5 Centrifugal Electric Pump in Stainless Steel
Centrifugal pumps are commonly used for pumping water, solvents, organics, oils, acids, bases and any ‘thin’ liquids in both industrial, agricultural and domestic applications. In fact, there is a design of centrifugal pump suitable for virtually any application involving low viscosity fluids.
- Lot ID
- MD907
- Category
- Miscellaneous
- Model
- Ebara 3LM 65-125/5.5
- Capacity
- Max. 2100 l/min 126m3/h
- Process Application
- Multiple Fluid Transfer Applications
- Other Info
- 5.5kW 7.5hp
- Condition
- Seen working by RSW, Excellent Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:28 GMT
- Part of an Auction
- Warehouse Clearance
Ebara 3M/I 32-160/1.5 Centrifugal Electric Pump in Stainless Steel
Centrifugal pumps are commonly used for pumping water, solvents, organics, oils, acids, bases and any ‘thin’ liquids in both industrial, agricultural and domestic applications. In fact, there is a design of centrifugal pump suitable for virtually any application involving low viscosity fluids.
- Lot ID
- MD909
- Category
- Miscellaneous
- Model
- Ebara 3M/I 32-160/1.5
- Capacity
- Max. 333 l/min 20m3/h
- Process Application
- Multiple Fluid Transfer Applications
- Other Info
- 1.5kW 2hp
- Condition
- Excellent Condition, Ex demonstration, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:30 GMT
- Part of an Auction
- Warehouse Clearance
Ebara 3M/I 32-160/1.5 Centrifugal Electric Pump in Stainless Steel
Centrifugal pumps are commonly used for pumping water, solvents, organics, oils, acids, bases and any ‘thin’ liquids in both industrial, agricultural and domestic applications. In fact, there is a design of centrifugal pump suitable for virtually any application involving low viscosity fluids.
- Lot ID
- MD910
- Category
- Miscellaneous
- Model
- Ebara 3M/I 32-160/1.5
- Capacity
- Max. 333 l/min 20m3/h
- Process Application
- Multiple Fluid Transfer Applications
- Other Info
- 1.5kW 2hp
- Condition
- From a working environment, Excellent Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:32 GMT
- Part of an Auction
- Warehouse Clearance
Ebara 3M/I 32-160/1.5 Centrifugal Electric Pump in Stainless Steel
Centrifugal pumps are commonly used for pumping water, solvents, organics, oils, acids, bases and any ‘thin’ liquids in both industrial, agricultural and domestic applications. In fact, there is a design of centrifugal pump suitable for virtually any application involving low viscosity fluids.
- Lot ID
- MD912
- Category
- Miscellaneous
- Model
- Ebara 3M/I 32-160/1.5
- Capacity
- Max. 333 l/min 20m3/h
- Process Application
- Multiple Fluid Transfer Applications
- Other Info
- 1.5kW 2hp
- Condition
- From a working environment, Excellent Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:34 GMT
- Part of an Auction
- Warehouse Clearance
Ebara 3LM/I 40-125/2.2 Centrifugal Electric Pump in Stainless Steel
Centrifugal pumps are commonly used for pumping water, solvents, organics, oils, acids, bases and any ‘thin’ liquids in both industrial, agricultural and domestic applications. In fact, there is a design of centrifugal pump suitable for virtually any application involving low viscosity fluids.
- Lot ID
- MD915
- Category
- Miscellaneous
- Model
- Ebara 3LM/I 40-125/2.2
- Capacity
- Max. 700 l/min 42m3/h
- Process Application
- Multiple Fluid Transfer Applications
- Other Info
- 2.2kW 3hp
- Condition
- From a working environment, Excellent Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:36 GMT
- Part of an Auction
- Warehouse Clearance
Ebara 3LM/I 40-125/2.2 Centrifugal Electric Pump in Stainless Steel
Centrifugal pumps are commonly used for pumping water, solvents, organics, oils, acids, bases and any ‘thin’ liquids in both industrial, agricultural and domestic applications. In fact, there is a design of centrifugal pump suitable for virtually any application involving low viscosity fluids.
- Lot ID
- MD916
- Category
- Miscellaneous
- Model
- Ebara 3LM/I 40-125/2.2
- Capacity
- Max. 700 l/min 42m3/h
- Process Application
- Multiple Fluid Transfer Applications
- Other Info
- 2.2kW 3hp
- Condition
- From a working environment, Excellent Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:38 GMT
- Part of an Auction
- Warehouse Clearance
Ebara 3MHS/I 65-160 Centrifugal Electric Pump in Stainless Steel
Centrifugal pumps are commonly used for pumping water, solvents, organics, oils, acids, bases and any ‘thin’ liquids in both industrial, agricultural and domestic applications. In fact, there is a design of centrifugal pump suitable for virtually any application involving low viscosity fluids.
- Lot ID
- MD917
- Category
- Miscellaneous
- Model
- Ebara 3MHS/I 65-160/9.2 IE3
- Capacity
- Max. 2200 l/min 132m3/h
- Process Application
- Multiple Fluid Transfer Applications
- Other Info
- 9.2kW // 12.3hp
- Condition
- From a working environment, Excellent Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:40 GMT
- Part of an Auction
- Warehouse Clearance
ELKOM UK Ltd Industrial Heated / Warming Table
Elkom GmbH manufactured heated/warming table for warming or heating, or composite curing. Warm table to a pre-determined temperature, adjustable up to 200°C. Used in the aircraft Industry once previously.
- Lot ID
- ME921
- Category
- Associated Heat Treatment Equipment
- Model
- ELKOM UK Ltd E1
- Internal Size (WxDxH mm) [?]
- Table size 850 x 650
- Max Temp
- 200°C
- Other Info
- Height Adjustable
- Condition
- Excellent Condition, Current Model, Seen powered at RSW
- Location
- RSW Aldridge
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:42 GMT
- Part of an Auction
- Warehouse Clearance
ARJAY Automation Conveyor and Weighing Cell - 2 Conveyors, Weighing Platform & Stacking Unit
A special purpose set up unit comprising of 2 driven conveyors, a weighing system, a vertical box conveyor and control panel.
- Lot ID
- ME924
- Category
- Miscellaneous
- Model
- ARJAY Automation Special Purpose Machinery
- Capacity
- 20Kg's
- Process Application
- Transport and Weighing of Components
- Other Info
- Weigh Parts Into Pans and Stack
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:44 GMT
- Part of an Auction
- Warehouse Clearance
EMB Papst Table Rotation, 4 Fan Cooler Unit with Loading & Unloading Conveyors
This cooling unit was originally designed to cool hot none ferrous stamping prior to the next operation. Parts were moved on a metal belt conveyor into the slowly rotating table which moved them below the four cooling fans, one at a time to reduce the temperature of the parts prior to being conveyed to the next operation.
- Lot ID
- ME925
- Category
- Miscellaneous
- Model
- EMB Papst 4 Fan Cooler Unit with conveyors.
- Capacity
- Continuous Throughput
- Process Application
- In-Line Cooling
- Other Info
- Originally used for Hot Stamping cooling
- Condition
- From a working environment, Good Condition, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:46 GMT
- Part of an Auction
- Warehouse Clearance
Rook London 30 Ton Hydraulic Hand Press
A small hydraulic hand press up to 30 Ton with adjustable top plate allowing for various size items to fit within the press pressure range.
- Lot ID
- ME926
- Category
- Miscellaneous
- Model
- Rook London Hand Press
- Capacity
- 30 Ton Pressure
- Process Application
- Hand Pressing / Compressing Operations
- Other Info
- Adjustable Top Plate
- Condition
- Seen working by RSW, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:48 GMT
- Part of an Auction
- Warehouse Clearance
Specimen Storage Cabinet
A small compact, 10 drawer specimen storage cabinet with 10 drawer inlays with 50 off, 32mm diameter holes in each, ideal for small samples to keep them in order and prevent any damage or contamination. Would suit for example, a coin collection.
- Lot ID
- ME927
- Category
- Miscellaneous
- Model
- 10 Drawer Specimen Cabinet
- Capacity
- Each Drawer 296 x 345 x 35mm
- Process Application
- Safe Storage of Specimens
- Other Info
- 50 Specimens per drawer
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:50 GMT
- Part of an Auction
- Warehouse Clearance
Pumping Station
The lifting station is a low height robust storage tank made from polyethylene with an angled bottom. The tank is designed to offer gravity feed with pumped return.
- Lot ID
- MW575
- Category
- Associated Mass Finishing Equipment
- Model
- Pumping station
- Type
- Buffer tank with stem pump
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:52 GMT
- Part of an Auction
- Warehouse Clearance
Netzsch Nemo BY Progressing Cavity Pump
NEMO Progressing Cavity Pumps have a very broad application range and are used in all branches of industry for the continuous, pressure-stable, gentle and low-pulsation conveyance of almost any substance.
- Lot ID
- MX599
- Category
- Associated Process Plant & Equipment
- Model
- Netzsch NM045BY02S12B
- Process Stages
- 1
- Other Info
- Unused spare pump
- Condition
- From a working environment, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:54 GMT
- Part of an Auction
- Warehouse Clearance
Hymo Hydraulic Lifting Platform
Hymo AXX 8 T series lifting tables are modern, reliable devices whose main task is to effectively level the difference in levels in various types of work environments.
- Lot ID
- MY609
- Category
- Miscellaneous
- Model
- Hymo Hymo AXX8T
- Process Application
- Hydraulic lifting table
- Condition
- Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:56 GMT
- Part of an Auction
- Warehouse Clearance
Worthington Simpson 2 Pumps and Control Panel
Control panel and two Worthington Simpson close coupled end suction pump types WB, WJ & WJE form part of Flowserve’s D Line range of pumps.
- Lot ID
- MY626
- Category
- Miscellaneous
- Model
- Worthington Simpson 40 WJE 200
- Capacity
- 40M3 Hr : head 200KPa
- Process Application
- Fluid Movement
- Other Info
- Max suck pressure 2.75 Bar
- Condition
- Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 15:58 GMT
- Part of an Auction
- Warehouse Clearance
Walther Trowal Conveyor
Walther Trowal C6.6/370 modular slatted belt conveyors are an ideal way of conveying products between processes. The modular construction means that individual or custom flights can be inserted allowing the unit to be adapted to suit a wide range of products.
- Lot ID
- MY629
- Category
- Miscellaneous
- Model
- Walther Trowal C6.6/370
- Other Info
- WORK ENVELOPE 325 x 7000
- Condition
- Excellent Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:00 GMT
- Part of an Auction
- Warehouse Clearance
Labotek Con- Evator Blower System, ABB 3.5kw motor
The Con-Evator PGT is designed for conveying of plastic material from a bag or bin to the intermediate hopper of the processing machine or another hopper.
- Lot ID
- MZ659
- Category
- Miscellaneous
- Model
- Labotek szlt6/2
- Process Application
- Numerous
- Other Info
- Mobile
- Condition
- Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:02 GMT
- Part of an Auction
- Warehouse Clearance
KEB Antriebstechnik GmbH High Torque, Slow Speed Electric Motor and Reduction Gearbox Assembly
Electric motor and gearbox giving an output of 125 rev/min.
- Lot ID
- MZ671
- Category
- Miscellaneous
- Model
- KEB Antriebstechnik GmbH
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:04 GMT
- Part of an Auction
- Warehouse Clearance
Eurotherm Oven Data Logger, PID Temperature Controller and Pendent
Upgrade your existing oven with this Eurotherm 6180 data logger and Eurotherm 3508 PID temperature controller, complete with a movable pendent arm for operator comfort.
- Lot ID
- OA2244
- Category
- Associated Heat Treatment Equipment
- Model
- Eurotherm Eurotherm 6180 and Eurotherm 3508
- Max Temp
- 0 to 9999°C
- Other Info
- AMS Compliant
- Condition
- Excellent Condition, Current Model, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:06 GMT
- Part of an Auction
- Warehouse Clearance
Despatch Heavy Duty Industrial Indirect Gas Fired Oven
The Despatch precision walk-in, trolley-in oven can accommodate a variety of specific product and process needs.
Typical applications include: aging, bonding, curing, drying, baking, heat treating, annealing and stress-relieving.
- Lot ID
- OA2256J
- Category
- Industrial Ovens
- Model
- Despatch Special PWC 3-21
- Internal Size (WxDxH mm) [?]
- 1820 x 1800 x 1760
- Max Temp
- 260 °C
- Other Info
- Complete with Gas Safe Certificate @ RSW
- Condition
- Good Condition, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:08 GMT
- Part of an Auction
- Warehouse Clearance
Caltherm Double Stage, Well Drying Oven
A Caltherm double chamber well drying oven with a total of 13.8kW of heating capacity, 3kW fan motor and two 840 litre drying chambers. Featuring independent, pneumatically operated lids (may achieve a higher working temperature 150°C TBC). Tested to 100°C
- Lot ID
- OB2331J
- Category
- Industrial Ovens
- Model
- Caltherm Well Oven
- Internal Size (WxDxH mm) [?]
- Twin Chambers each 840 x 1000 x 1000
- Max Temp
- 100°C
- Other Info
- Stainless Steel Lined
- Condition
- Seen working by RSW, Excellent Condition, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:10 GMT
- Part of an Auction
- Warehouse Clearance
Caltherm Industrial Electric Twin Lane, Roller Track, Through Heating / Stoving / Drying Oven
A Caltherm Well Dryer, featuring two through feed chambers with independently controllable entry and exit doors. Roller tracking enables the ease of rolling in and through the chambers of components or fixtures with a suitable flat base. Additional roller tracking is supplied to offload from the chambers.
- Lot ID
- OC2449
- Category
- Industrial Ovens
- Model
- Caltherm Double Vertical Door Pass Through Heated Oven
- Internal Size (WxDxH mm) [?]
- 2 chambers each 400 w x 1600 d, 500 h
- Max Temp
- 250°C TBC
- Other Info
- Increase your heat treat throughput
- Condition
- Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:12 GMT
- Part of an Auction
- Warehouse Clearance
Caltherm Twin Chamber Oven / Cooler With Automatic Conveyor Transfer
Caltherm oven/cooler with a programable cycle controller, powered opening doors, conveyor through feed and controlled heating and cooling cycles. 32.4kW of heating power ensures rapid heating of the oven chamber.
- Lot ID
- OC2482
- Category
- Industrial Ovens
- Model
- Caltherm Oven / Cooler
- Internal Size (WxDxH mm) [?]
- 800 x 900 x 950 (Usable Each Chamber)
- Max Temp
- 150°C, Cooler to 50°C in 30mins.
- Other Info
- Forced Air Cooling
- Condition
- Excellent Condition, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:14 GMT
- Part of an Auction
- Warehouse Clearance
Lanemark Combustion Engineering Ltd FDGAN-3 Natural Gas Burner
The FD range of burners are forced draught burners designed for industrial process air heating requirements. Short flame lengths, exceptional flame stability and accurate turndown as low as 9kW (30,000 Btu/h) are achieved by the unique Lanemark cone design combustion head.
- Lot ID
- OD2502
- Category
- Miscellaneous
- Model
- Lanemark Combustion Engineering Ltd FD10C(GA)N-3
- Capacity
- Heat input 1,500,000Btu/h 440kW
- Process Application
- Gas Powered Heating
- Other Info
- Natural Gas : Train Type VCV2 230V
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:16 GMT
- Part of an Auction
- Warehouse Clearance
Lanemark Combustion Engineering Ltd FDGAN-3 Natural Gas Burner
The FD range of burners are forced draught burners designed for industrial process air heating requirements. Short flame lengths, exceptional flame stability and accurate turndown as low as 9kW (30,000 Btu/h) are achieved by the unique Lanemark cone design combustion head.
- Lot ID
- OD2503
- Category
- Miscellaneous
- Model
- Lanemark Combustion Engineering Ltd FD15C(GA)N-3
- Capacity
- Heat input 2,250,000Btu/h 660kW
- Process Application
- Gas Powered Heating
- Other Info
- Natural Gas : Train Type VCV2 230V
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:18 GMT
- Part of an Auction
- Warehouse Clearance
Lanemark Combustion Engineering Ltd Burner FDGAN-3 Natural Gas Burner
The FD range of burners are forced draught burners designed for industrial process air heating requirements. Short flame lengths, exceptional flame stability and accurate turndown as low as 9 kW (30,000 Btu/h) are achieved by the unique Lanemark cone design combustion head.
- Lot ID
- OD2504
- Category
- Miscellaneous
- Model
- Lanemark Combustion Engineering Ltd FD15C(GA)N-3 (TBC)
- Capacity
- Heat input 2,250,000Btu/h 660kW (TBC)
- Process Application
- Gas Powered Heating
- Other Info
- Natural Gas : Train Type VCV2 230V (TBC)
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:20 GMT
- Part of an Auction
- Warehouse Clearance
Barlow Whitney E300 VAF Vertical Air Circulated Electric Industrial Oven
This second hand Barlow Whitney industrial batch oven is suitable for almost any application from simple drying processes to exacting metal treatments.
- Lot ID
- OD2544J
- Category
- Industrial Ovens
- Model
- Barlow Whitney E300 VAF
- Internal Size (WxDxH mm) [?]
- 1200 x 1200 x 1850mm
- Max Temp
- 200°C (Design 300°C) Control max.200°C
- Other Info
- Air Circulation Fan
- Condition
- From a working environment
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:22 GMT
- Part of an Auction
- Warehouse Clearance
AEW 250°C Industrial Batch Oven
A pre-owned AEW treatments oven for drying, curing, and other low temperature thermal processes.
- Lot ID
- OD2565
- Category
- Industrial Ovens
- Model
- AEW Curing Oven
- Internal Size (WxDxH mm) [?]
- 785 x 825 x 750
- Max Temp
- 250 °C
- Condition
- From a working environment
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:24 GMT
- Part of an Auction
- Warehouse Clearance
Carbolite 300°C Nitrogen Purge Gas Tight Oven
An electric Carbolite gas tight industrial oven with a nitrogen purge set up. This 300°C oven features a roof mounted air circulation fan, stainless steel interior with 7 shelf runner positions.
- Lot ID
- OE2601
- Category
- Industrial Ovens
- Model
- Carbolite Gas Tight Oven
- Internal Size (WxDxH mm) [?]
- 640 x 600 x 1170mm (450 Litres)
- Max Temp
- 300°C 6kW
- Other Info
- Nitrogen Purge Timer & Gauge
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:26 GMT
- Part of an Auction
- Warehouse Clearance
Carbolite 1200°C LCF Large Industrial Chamber Furnace
From a range of well proven highly efficient large capacity furnaces incorporating features which combine the expertise of generations of furnace construction and design, together with the latest high technology, components, and techniques.
- Lot ID
- OE2613
- Category
- Industrial Furnaces
- Model
- Carbolite LCF 1200°C
- Internal Size (WxDxH mm) [?]
- 600 x 1300 x 260mm (202 Litres)
- Max Temp
- 1200°C
- Other Info
- ABB SM500F Videographic Recorder (VGR)
- Condition
- From a working environment
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:28 GMT
- Part of an Auction
- Warehouse Clearance
LTE Natural Convection Electric Drying Cabinet
A natural convection electric cabinet with a max temperature of 85°C, this LTE drying cabinet is manufactured from stainless steel with toughened glass sliding doors. Also featuring two stainless steel shelves with 35 shelf positions & a 180 litre capacity.
- Lot ID
- OE2624
- Category
- Associated Heat Treatment Equipment
- Model
- LTE Stainless Steel - Sliding Door
- Internal Size (WxDxH mm) [?]
- 995 x 325 x 555
- Max Temp
- 85°C : 180 Litres Capacity
- Other Info
- Two Shelves, 240 Volt, 50 Hz, 1150 Watts
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:30 GMT
- Part of an Auction
- Warehouse Clearance
LTE Natural Convection Electric Drying Cabinet
A natural convection electric cabinet with a max temperature of 85°C, this LTE drying cabinet is manufactured from stainless steel with toughened glass sliding doors. Also featuring two stainless steel shelves with 35 shelf positions & a 180 litre capacity.
- Lot ID
- OE2625
- Category
- Associated Heat Treatment Equipment
- Model
- LTE Stainless Steel - Sliding Door
- Internal Size (WxDxH mm) [?]
- 995 x 325 x 555
- Max Temp
- 85°C : 180 Litres Capacity
- Other Info
- Two Shelves, 240 Volt, 50 Hz, 1150 Watts
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:32 GMT
- Part of an Auction
- Warehouse Clearance
Montford Bench Top Test Chamber
The Montford Mini-Mech Bench Top Chamber is a portable compact model which is easy to transport, locate and install, making it Ideal for environmental testing of smaller products and components for extreme heat, and cold conditions.
- Lot ID
- OP917
- Category
- Laboratory & Bench Top Ovens
- Model
- Montford Mini P LGA
- Internal Size (WxDxH mm) [?]
- 230 x 200 x 250 mm
- Max Temp
- approx - 40°c to + 100°c
- Other Info
- Heat cold extreme testing instrument
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:34 GMT
- Part of an Auction
- Warehouse Clearance
Sandras Selerity Technologies Series 900 Polartherm
Temperature programmed HPLC is taken to extremes with the Polaratherm™ Series 9000 Total Temperature Controller with mobile phase preheating, and optional cryo cooling.
- Lot ID
- OR1193
- Category
- Associated Process Plant & Equipment
- Model
- Series 900 oven
- Work Envelope (WxDxH mm) [?]
- 120 x 55 x 330mm
- Process Stages
- Minus temps' up to +200°C
- Other Info
- Temperature programmed HPLC
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:36 GMT
- Part of an Auction
- Warehouse Clearance
Seba Developments Top Loading Drying Oven
This Seba Electrically Heated Top Load oven (also referred to as a chest or coffin oven) offers a compact space savings design with ease of loading.
- Lot ID
- OU1480
- Category
- Laboratory & Bench Top Ovens
- Model
- Seba Developments Chest oven
- Internal Size (WxDxH mm) [?]
- 585 x 585 x 485
- Max Temp
- 150°C
- Other Info
- Air circulated
- Condition
- Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:38 GMT
- Part of an Auction
- Warehouse Clearance
SPX Blue M TPS DC-146-NY-UP550 Oven
Blue M 146 Standard Industrial Oven which offers exceptional temperature uniformity whilst providing fresh air turnover for critical drying applications.
- Lot ID
- OW1771
- Category
- Laboratory & Bench Top Ovens
- Model
- SPX Blue M M/TPS DC-146-NY-UP550
- Internal Size (WxDxH mm) [?]
- 356 mm x 356 mm x 356 mm
- Max Temp
- 350° C
- Other Info
- Rated 3 kW Max 220v/1ph/50 Hz
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:40 GMT
- Part of an Auction
- Warehouse Clearance
Fibrex Heat Treatment Plants Endothermic Gas Generator
The Endothermic gas generator produces the protective gas that is used in some heat treating processes and furnaces. The atmosphere is prepared by the mixing of hydrocarbon natural town gas, with air.
- Lot ID
- OY1964J
- Category
- Associated Heat Treatment Equipment
- Model
- ENDO 100-55E
- Other Info
- 20 m3/hr Output
- Condition
- From a working environment
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:42 GMT
- Part of an Auction
- Warehouse Clearance
Carbolite Sterilization Oven
Controlled Atmosphere Oven suitable for use in a batch production environment. The oven is suitable for use with inert gases such as nitrogen. The fully sealed inner case enables oxygen levels of less than 50ppm to be achieved in the work chamber.
- Lot ID
- OY1970
- Category
- Laboratory & Bench Top Ovens
- Model
- Carbolite 220 litre Special
- Internal Size (WxDxH mm) [?]
- 600 X 650 X 650
- Max Temp
- 200
- Other Info
- Gas Tight Oven
- Condition
- Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:44 GMT
- Part of an Auction
- Warehouse Clearance
Thermotron Environmental Chamber
A used Thermotron Temperature and Humidity model SM-16 Test Chamber.
When extreme temperature testing is required, the SM-16 offers ultimate flexibility for your materials testing needs. Please see attached service engineers report.
- Lot ID
- OY2020
- Category
- Laboratory & Bench Top Ovens
- Model
- Thermotron SM 16 CE
- Internal Size (WxDxH mm) [?]
- 760 x 760 x 760
- Max Temp
- +45°C
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:46 GMT
- Part of an Auction
- Warehouse Clearance
Caltherm High Precision 400°C Oven with Shuttle Loading Table
A small heat treatment oven manufactured in 2004 by Caltherm. Digitally controlled heating and cooling cycles, originally designed for annealing tubes and other such more complex parts.
- Lot ID
- OY2028
- Category
- Industrial Ovens
- Model
- Caltherm High Tolerance Controlled Heat & Cool Treatemnts
- Internal Size (WxDxH mm) [?]
- 300 x 600 x 300
- Max Temp
- 400*C
- Other Info
- VFC - Vertical Forced Air Circulation
- Condition
- Excellent Condition, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:50 GMT
- Part of an Auction
- Warehouse Clearance
Geotech Gas Analyser
The GA3000 PLUS range of gas analysers offer an effective online monitoring giving local data outputs.
- Lot ID
- OY2029
- Category
- Miscellaneous
- Model
- Geotech GA3000 Plus
- Process Application
- Measure various gases Typical, land fill
- Other Info
- OEM support available
- Condition
- Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:52 GMT
- Part of an Auction
- Warehouse Clearance
Caltherm Roller Hearth Turbine Blade Exceptionally high specification Drying Oven
A very high quality, 120°C drying oven to AMS 2750 E standard. Originally designed for use in the aerospace industry.
- Lot ID
- OY2070J
- Category
- Industrial Ovens
- Model
- Caltherm High Spec Drying Oven to AMS2750E
- Internal Size (WxDxH mm) [?]
- 430 x 560 x 370
- Max Temp
- 120
- Other Info
- Mf for Rolls Royce to AMS2570
- Condition
- Seen working by RSW, Excellent Condition, Current Model, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:54 GMT
- Part of an Auction
- Warehouse Clearance
Centrotherm Heating Cassette
Centrotherm Heating Cassette
- Lot ID
- OZ1259-9
- Category
- Associated Heat Treatment Equipment
- Model
- Centrotherm
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:56 GMT
- Part of an Auction
- Warehouse Clearance
CDS Airtek 900°C Electric multi process Oven / Furnace
The oven can heat up to 900° C and was originally designed to have a small bleed of dilution air going into the oven during heat up, this would be increased and used to allow cooling of the products on completion of the heat cycle. A large roof damper is used in conjunction with the air intake to control temperature and cooling.
- Lot ID
- OZ2121J
- Category
- Industrial Ovens
- Model
- CDS Airtek Very high temperature heat treatment oven.
- Internal Size (WxDxH mm) [?]
- 950 x 1250 x 1370
- Max Temp
- 900°C
- Other Info
- Flammability analyser fitted
- Condition
- From a working environment, Excellent Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 16:58 GMT
- Part of an Auction
- Warehouse Clearance
RJH Powerflin Lynx LX Series Ring and Extremity Finisher / Belt Grinder
The RJH POWERFIN LYNX Ring and Extremity Finisher and Belt Grinder is a heavy duty high performance machine designed for finishing internal rings, open or blind components. Complete with a large selection of spare belts.
- Lot ID
- PA1138
- Category
- Manual Linishing & Belt Grinding Machinery
- Model
- RJH LX Series
- R.P.M.
- 3000
- Hp/Kw
- 4kw / 5.5Hp
- Other Info
- Safety DC Foot Brake
- Condition
- Seen working by RSW, Good Condition, Current Model, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:00 GMT
- Part of an Auction
- Warehouse Clearance
Twin Downdraft Extraction Bench with Perspex Surround
Exceptionally flexible downdraft extraction bench. Providing answers to nuisance dusts and fume overspray etc.
- Lot ID
- PA1145S
- Category
- Associated Dust Control Equipment
- Model
- Triple Outlet Down Draft Bench
- Approx Duty CFM / M³/Hr
- Process Dependent
- Filter Area ft² / m²
- See wet or dry extraction in our list.
- Other Info
- Multipurpose Capture Dust Spray/Fume.
- Condition
- Seen working by RSW, Excellent Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:02 GMT
- Part of an Auction
- Warehouse Clearance
Mestra Double Ended, Twin Speed Polishing Lathe Housed in a Console
The MESTRA double ended, single phase polishing lathe is a modern and elegant design, made to the most modern concepts ensuring high quality and safety. The motor housing is made of extruded aluminium tube. Large base for greater stability, this unit is mounted inside a work console which has a light.
- Lot ID
- PC1177
- Category
- Manual Polishing Lathes & Machinery
- Model
- Mestra R-080160
- R.P.M.
- Twin Speed 1500 & 3000
- Hp/Kw
- 0.125kW, 230 Volt Single Phase
- Other Info
- Double Ended Shaft each length 270mm
- Condition
- Excellent Condition, Current Model, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:04 GMT
- Part of an Auction
- Warehouse Clearance
Mestra Double Ended, Twin Speed Polishing Lathe Housed in a Console
The MESTRA double ended, single phase polishing lathe is a modern and elegant design, made to the most modern concepts ensuring high quality and safety. The motor housing is made of extruded aluminium tube. Large base for greater stability, this unit is mounted inside a work console which has a light.
- Lot ID
- PC1178
- Category
- Manual Polishing Lathes & Machinery
- Model
- Mestra R-080160
- R.P.M.
- Twin Speed 1500 & 3000
- Hp/Kw
- 0.125kW, 230 Volt Single Phase
- Other Info
- Double Ended Shaft each length 270mm
- Condition
- Excellent Condition, Current Model, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:06 GMT
- Part of an Auction
- Warehouse Clearance
Mestra Double Ended, Twin Speed Polishing Lathe Housed in a Console
The MESTRA double ended, single phase polishing lathe is a modern and elegant design, made to the most modern concepts ensuring high quality and safety. The motor housing is made of extruded aluminium tube. Large base for greater stability, this unit is mounted inside a work console which has a light.
- Lot ID
- PC1179
- Category
- Manual Polishing Lathes & Machinery
- Model
- Mestra R-080160
- R.P.M.
- Twin Speed 1500 & 3000
- Hp/Kw
- 0.125kW, 230 Volt Single Phase
- Other Info
- Double Ended Shaft each length 270mm
- Condition
- Excellent Condition, Current Model, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:08 GMT
- Part of an Auction
- Warehouse Clearance
Mestra Double Ended, Twin Speed Polishing Lathe Housed in a Console
The MESTRA double ended, single phase polishing lathe is a modern and elegant design, made to the most modern concepts ensuring high quality and safety. The motor housing is made of extruded aluminium tube. Large base for greater stability, this unit is mounted inside a work console which has a light.
- Lot ID
- PC1180
- Category
- Manual Polishing Lathes & Machinery
- Model
- Mestra R-080160
- R.P.M.
- Twin Speed 1500 & 3000
- Hp/Kw
- 0.125kW, 230 Volt Single Phase
- Other Info
- Double Ended Shaft each length 270mm
- Condition
- Excellent Condition, Current Model, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:10 GMT
- Part of an Auction
- Warehouse Clearance
Birkett Cutmaster Through Feed Horizontal Belt Linishing and Sanding Machine
This Birkett Cutmaster 900mm flatbed is a premier industrial metal working multi-finishing machine. This single belt dry working machine is equipped with a powerful motor, allowing it to process the toughest and heaviest jobs around.
- Lot ID
- PD1193
- Category
- Through feed flat bed Linishing & Brushing Machinery
- Model
- Birkett Cutmaster 901-M1
- Hp/Kw
- 15kW main motor
- Other Info
- Graining de-burring finishing machine.
- Condition
- Good Condition, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:12 GMT
- Part of an Auction
- Warehouse Clearance
RJH Double Ended Polisher Universal Brushing & Mopping Machine
The RJH double-ended polisher is a robust machine that is ideal for general industrial use. The double-ended design allow two different consumables to be mounted on each end, permitting two operations to be performed sequentially on the same component.
- Lot ID
- PE1205
- Category
- Manual Polishing Lathes & Machinery
- Model
- RJH Belt Driven Twin Contact Position
- R.P.M.
- 2750
- Hp/Kw
- 12Hp/9Kw
- Other Info
- Parallel Spindle Ends
- Condition
- Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:14 GMT
- Part of an Auction
- Warehouse Clearance
Canning 1612 Model 1, Twin Head, Polishing Lathe
This Canning Model 1612 is one of the most widely used heavy duty manual polishers ever produced and is equipped with 4 heavy duty bearings for long life, double ended spindle ends for flexibility and is powered by a single robust high torque motor. Taper ends to each spindle.
- Lot ID
- PE1211J
- Category
- Manual Polishing Lathes & Machinery
- Model
- Canning 1612 Model 1 Twin Head
- R.P.M.
- 2870
- Hp/Kw
- 2hp 1.5KW
- Other Info
- Industrial Single Motor, Single Speed.
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:16 GMT
- Part of an Auction
- Warehouse Clearance
Higgs Heavy Duty Horizontal Floor Mounted Belt Linisher
Horizontal belt linisher with a 100mm wide belt. Ideal for a small workshop or engineering works.
- Lot ID
- PE1212J
- Category
- Manual Linishing & Belt Grinding Machinery
- Model
- Higgs Horizontal Belt (100 x 915mm)
- R.P.M.
- 1425
- Hp/Kw
- 0.5Hp // 0.37kW
- Other Info
- Flat Bed with Work Plattern Below Belt
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:18 GMT
- Part of an Auction
- Warehouse Clearance
Seeco Wet Belt Linisher
Seeco Wet Belt Linisher. 75 mm wide belt
- Lot ID
- PL586
- Category
- Manual Linishing & Belt Grinding Machinery
- Model
- Seeco Seeco
- R.P.M.
- 1500
- Other Info
- Pedestal mounted WET belt option.
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:20 GMT
- Part of an Auction
- Warehouse Clearance
Morrisflex Belt linisher
Morrisflex 1060 Belt Grinder/Linisher
- Lot ID
- PQ906
- Category
- Manual Linishing & Belt Grinding Machinery
- Model
- Morrisflex 1060
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:22 GMT
- Part of an Auction
- Warehouse Clearance
RJH Profile Belt Linisher, Extractor Mounted
This second hand RJH Morrisflex 1060 belt belt linisher. Mounted Oman a self contained dust control plant, is a high quality industrial triangulated backstand abrasive belt / sander suitable for use on a variety of materials and processes.
- Lot ID
- PQ907
- Category
- Manual Linishing & Belt Grinding Machinery
- Model
- RJH 1060
- R.P.M.
- 1500
- Hp/Kw
- 1 / .75
- Other Info
- Idling multiple contact roller design
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:24 GMT
- Part of an Auction
- Warehouse Clearance
Ellis Brothers Polishing / Linishing Machine
This Used (second hand) Ellis Brothers machine is an industrialy rated combined backstand linisher / belt sander and polisher
- Lot ID
- PQ945
- Category
- Manual Polishing Lathes & Machinery
- Model
- Ellis Brothers
- Hp/Kw
- 3ph 50 Hz
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:26 GMT
- Part of an Auction
- Warehouse Clearance
Greif Double Arm, Rear Driven, Idling Contact Roll Linisher
Heavy duty space saving twin belt linishing machine, complete with forward facing adjustable angle arms with guarding and adaptable idling contact wheels.
- Lot ID
- PR969
- Category
- Manual Linishing & Belt Grinding Machinery
- Model
- Greif DV-30-2-2
- R.P.M.
- 2850
- Hp/Kw
- 2.5kw / 3Hp
- Other Info
- German Build Quality
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:28 GMT
- Part of an Auction
- Warehouse Clearance
Burrows & Smith D-Burr Gear Deburring Machine
The D-Burr is an efficient machine designed to remove burrs from spur, bevel and helical gear teeth up to a 25° helix angle and sprockets and other components which have equi-spaced teeth around the periphery
- Lot ID
- PU1057
- Category
- Through feed flat bed Linishing & Brushing Machinery
- Model
- D-Burr
- Other Info
- Gear De-burring system
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:30 GMT
- Part of an Auction
- Warehouse Clearance
Stahli Isotropic Polishing / Lapping Machine with Automatic Loader
Swiss made Isotropic Polishing / Lapping machine with automatic loading.
- Lot ID
- PY1113J
- Category
- Automatic Polishing & Linishing Machinery
- Model
- Stahli FLM 755-3R
- R.P.M.
- Fully variable
- Hp/Kw
- 52Hp/39Kw
- Other Info
- Extraordinary opportunity as NEW Stahli
- Condition
- From a working environment, Excellent Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:32 GMT
- Part of an Auction
- Warehouse Clearance
Drake Power Systems 24V/1250A DC Air Cooled Transformer Rectifier
Drake Power Systems Saturable Reactor (transductor) controlled silicon diode, full wave bridge rectification, DC Rectifier.
- Lot ID
- RA731
- Category
- Rectifiers & DC Power
- Model
- Drake Power Systems Saturable Reactor Control
- Voltage
- 24V
- Amps
- 1250
- Other Info
- Silicone Diode
- Condition
- From a working environment
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:34 GMT
- Part of an Auction
- Warehouse Clearance
Drake Power Systems Rectifier
2000 Amp 8 Volt DC air cooled Rectifier.
Predominantly used in the electro plating, electro forming, electro paint, electro polishing and motor control industries, to provide a stable DC current supply.
- Lot ID
- RC721J
- Category
- Rectifiers & DC Power
- Model
- Drake Power Systems 8/2000
- Voltage
- 415 input : 0 to 8V output
- Amps
- 31 input :
- Other Info
- Thyristor Control
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:36 GMT
- Part of an Auction
- Warehouse Clearance
Bowers Electricals Ltd. 600kVA 10000/400v Dyn11 ONAN Eco Transformer
This distribution transformer is an oil cooled unit (ONAN) of 600kVA 10000/400v originally designed to provide power to an induction furnace.
- Lot ID
- RE732S
- Category
- Regulating Tranformers
- Model
- Bowers Electricals Ltd. 600kVA 10000/400v Dyn11
- Control Range
- Voltage Ratio : 11000/400
- Current rating
- 31.49 / 866.0
- Other Info
- As New , Demo Use Only
- Condition
- From a working environment, Seen working by RSW, Excellent Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:38 GMT
- Part of an Auction
- Warehouse Clearance
Drake Power Systems 16V DC, 1000A Rectifier
Drake Power Systems Saturable Reactor (transductor) controlled silicon diode, full wave bridge rectification, DC rectifier.
- Lot ID
- RF733J
- Category
- Rectifiers & DC Power
- Model
- Drake Power Systems Saturable Reactor Control
- Voltage
- 0-16
- Amps
- 0-1000
- Other Info
- Silicone Diode
- Condition
- From a working environment
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:40 GMT
- Part of an Auction
- Warehouse Clearance
Drake Power Systems 16V DC, 1000A Rectifier
Drake Power Systems Saturable Reactor (transductor) controlled silicon diode, full wave bridge rectification, DC Rectifier.
- Lot ID
- RF734J
- Category
- Rectifiers & DC Power
- Model
- Drake Power Systems Saturable Reactor Control
- Voltage
- 16
- Amps
- 1000
- Other Info
- Silicone Diode
- Condition
- From a working environment
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:42 GMT
- Part of an Auction
- Warehouse Clearance
Polaron Cortina Controller
A Siemens PLC control panel that is capable of controlling up to three Cortina Rectifiers.
- Lot ID
- RU705
- Category
- Rectifiers & DC Power
- Other Info
- Master/slave controller for multiple mcs
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:44 GMT
- Part of an Auction
- Warehouse Clearance
Munk PSP Varipuls 100A/6V Rectifier
Part of the MUNK Varipuls psp family - the modules and plug-in units of these plating rectifiers feature advanced switched-mode power supply technology designed for simple air cooling.
- Lot ID
- RU711
- Category
- Rectifiers & DC Power
- Model
- Munk E230 G6/200 WRG-TFM
- Voltage
- 6
- Amps
- 100
- Other Info
- Single phase 230 Volts
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:46 GMT
- Part of an Auction
- Warehouse Clearance
Wheelabrator M101 Self Contained, Fully Packaged, Tumble Belt Shotblast Machine
The Wheelabrator M101 shot blast machine offers a low-cost solution to batch clean tumble-proof components in the most efficient and economical way. PLC has lost memory, replacement or re-program required.
- Lot ID
- SC1017
- Category
- Airless & Automated Blast Equipment
- Model
- Wheelabrator Tumble Blast M101
- Work Envelope (WxDxH mm) [?]
- 825 x 600
- Work Handling Method
- Manual load, Automatic cycle
- Other Info
- Refurbishment to be Commenced on Sale
- Condition
- Refurbished by RSW, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:48 GMT
- Part of an Auction
- Warehouse Clearance
Mac'Ants Group Shot Blasting Pressure Pot
Manufactured by Mac'Ants, the model MZ24200 is the largest standard model of the current range, carrying 150kg of media and is ideal for shotblasting rooms. This unit needs a mesh sieve, an air pressure valve, suitable hose and gun to complete it ready for use.
- Lot ID
- SD1032
- Category
- Associated Shot Blasting Equipment
- Model
- Mac'Ants Group MZ24200 DMP
- Work Envelope (WxDxH mm) [?]
- Pot diameter 508mm
- Work Handling Method
- Manually Filled Auto Blast
- Other Info
- Abrasive capacity c.150kg
- Condition
- From a working environment, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:50 GMT
- Part of an Auction
- Warehouse Clearance
Sealey Products Shot Blast Cabinet
This heavy-duty steel cabinet features a toughened glass viewing screen for enhanced durability and visibility. The Sealey shot blasting cabinet, in like-new condition, is an excellent choice for shot blasting with glass beads, silicon carbide, aluminium oxide and blasting grit.
- Lot ID
- SE1057
- Category
- Suction Venturi Blast Cabinets
- Model
- Sealey Products SB973
- Work Envelope (WxDxH mm) [?]
- Door opening 480 x 245/410mm
- Work Handling Method
- Manual
- Other Info
- Very Little Use
- Condition
- Excellent Condition, Unused, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:52 GMT
- Part of an Auction
- Warehouse Clearance
Guyson International 1400 Mediblast Shot Blast Cabinet
The Guyson Mediblast range made from high chrome 316L surgical stainless steel has been specially engineered for medical product manufacturers and laboratories where the introduction of ferrous contamination would be detrimental to the production process.
- Lot ID
- SE1071
- Category
- Suction Venturi Blast Cabinets
- Model
- Guyson International 1400
- Work Envelope (WxDxH mm) [?]
- 815 x 560 x 591
- Work Handling Method
- Manual
- Other Info
- Fully Stainless Steel Construction
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:54 GMT
- Part of an Auction
- Warehouse Clearance
20ft Shotblast Room
20ft long steel container conversion into a shot blasting room, with internal lighting, double door access plus a sing pedestrian side access door. Extraction through a suitable extraction unit via ducting outlets to the roof and rear wall.
- Lot ID
- SE1084
- Category
- Associated Shot Blasting Equipment
- Model
- 20FT Container Room
- Work Envelope (WxDxH mm) [?]
- 5900 x 2350 x 2390mm (Approx.)
- Work Handling Method
- Manual Shot Blasting
- Other Info
- Steel Floor
- Condition
- From a working environment, Good Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:56 GMT
- Part of an Auction
- Warehouse Clearance
Wheelabrator Vacublast, Ventus 72S Industrial Shot Blast Cabinet
A well made second hand Vacublast, Ventus 72S self contained suction venturi fed shot blast cabinet. For manual light to medium blasting applications.
- Lot ID
- SW763
- Category
- Suction Venturi Blast Cabinets
- Model
- Wheelabrator Ventus 72
- Work Envelope (WxDxH mm) [?]
- 590 x 710 x 530
- Work Handling Method
- Manual
- Other Info
- Small but industrious machine
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 17:58 GMT
- Part of an Auction
- Warehouse Clearance
Herco Wassertechnik Electronic Water Compact Reverse Osmosis Unit
This compact reverse osmosis unit is used for the desalination of softened drinking water according to current drinking water regulations.
- Lot ID
- TD362
- Category
- Miscellaneous
- Model
- Herco Wassertechnik UO 120 WSE
- Capacity
- 120L/Hr
- Process Application
- Reverse Osmosis Water Treatment System
- Other Info
- Single Phase 230Volt 0.55kW
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 18:00 GMT
- Part of an Auction
- Warehouse Clearance
TWK srl Apollo SLR 80 Thermal Fluid Heater
The TWK srl Apollo SLR 80 Thermal Fluid Heater typically operates at up to 200°C at atmospheric pressure, the remaining fluid and pumpable down to minus -20°C (even lower with special fluids). Making it a solution suitable for a multitude of thermal processing applications.
- Lot ID
- TE366
- Category
- Associated Process Plant & Equipment
- Model
- TWK srl Apollo SLR 80
- Other Info
- Thermal process heater
- Condition
- Excellent Condition, Unused
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 18:02 GMT
- Part of an Auction
- Warehouse Clearance
Wilden P4 Diaphragm Pump
Wilden diecast aluminium double diaphragm pneumatically operated pump
- Lot ID
- TU148
- Category
- Associated Process Plant & Equipment
- Model
- Wilden P4/AAPP/BN/BN/BN 014
- Location
- Casting
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 18:04 GMT
- Part of an Auction
- Warehouse Clearance
Lamarflo Electroless Plating and Multiple Option Wet Bench
Electroless plating, also known as chemical plating or autocatalytic plating, is a class of industrial chemical processes that create metal coatings on various materials by a single chemical reaction of metal cations in a liquid bath.
- Lot ID
- TZ269
- Category
- Associated Process Plant & Equipment
- Model
- Lamarflo Flexible Wet Treatment Bench
- Work Envelope (WxDxH mm) [?]
- Each Stage 220 x 275 x 220
- Process Stages
- 8
- Other Info
- Built to exceptional qualtiy standards
- Condition
- Seen working by RSW, Excellent Condition
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 18:06 GMT
- Part of an Auction
- Warehouse Clearance
Ruwac Industriesauger NA35 DustEx /GasEx Wet Separator
Ruwac Industriesauger NA35 DustEx / GasEx Wet Separator. GRP construction. Flexible due to it's modular system. For separating dust from raw gases is referred to as wet separator (NA). The NA extract the dust-laden air and transport it into one
- Lot ID
- TZ274
- Category
- Wet Dust Filters
- Model
- Ruwac Industriesauger NA35 D1B1 Typ III
- Approx Duty CFM / M³/Hr
- 35 Litre
- Filter Area ft² / m²
- Controlled Dust and Gas Separation
- Other Info
- Gas/Air Temp upto 70°c
- Condition
- From a working environment, Excellent Condition, Seen powered at RSW
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 18:08 GMT
- Part of an Auction
- Warehouse Clearance
Walther Trowal Complete Mass Finishing Vibratory Start to Finish Processing Cell
A Walther Trowal, four stage finishing process comprising of a loading tipper, vibratory finishing bowl, magnetic transfer conveyor and rotating continuous parts dryer.
- Lot ID
- VA2172
- Category
- Vibratory Deburring & Polishing Machines
- Model
- Walther Trowal CD600 PN + Load Unload and Dry
- Capacity
- 600L
- Type
- Continuous Automatic
- Other Info
- Load, Wet Process, Separate, Through Dry
- Location
- Rolls Royce Stores Unit 6
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 18:10 GMT
- Part of an Auction
- Warehouse Clearance
Walther Trowal CA650 Vibratory Bowl
A Walther Trowal, three stage mass finishing cell / process comprising of a loading tipper, large vibratory helical finishing bowl and rotating continuous 3000Kg's/ Hr continuous parts rotary dryer. Electrical control panel included
- Lot ID
- VA2173
- Category
- Vibratory Deburring & Polishing Machines
- Model
- Walther Trowal CA650
- Capacity
- 650Litre
- Type
- Vibratory Bowl
- Other Info
- High Capacity Continuous Finishing Cell
- Condition
- From a working environment
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 18:12 GMT
- Part of an Auction
- Warehouse Clearance
Dreher CraneCare Lift N Load Hoist
A lift and load device built by CraneCare to work in conjunction the the Dreher VT 5 range of machines (Our stock number VT1037 A & B) for replenishing the media and parts into the processing bowls.
- Lot ID
- VT1047A
- Category
- Barreling & Rumbling Machinery
- Model
- Dreher Media transport system
- Capacity
- 100kg
- Type
- Loading hopper with vertical lift system
- Other Info
- Dreher VTS Suport Equipment
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 18:14 GMT
- Part of an Auction
- Warehouse Clearance
Dreher CraneCare Lift N Load Hoist
A lift and load device built by CraneCare to work in conjunction the the Dreher VT 5 range of machines (Our stock number VT1037A & B) for replenishing the media and parts into the processing bowls.
- Lot ID
- VT1047B
- Category
- Barreling & Rumbling Machinery
- Model
- Dreher Shot Transport
- Capacity
- 100kg lift capacity
- Type
- Loading hopper with vertical lift system
- Other Info
- Dreher VTS Suport Equipment
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 18:16 GMT
- Part of an Auction
- Warehouse Clearance
Spencer Halstead Lift And Tip Elevator
- Lot ID
- VW1143
- Category
- Associated Shot Blasting Equipment
- Model
- Spencer Halstead
- Work Envelope (WxDxH mm) [?]
- 890 X 700 X 1500
- Other Info
- Removed from a Tumbelt blast machine
- Condition
- From a working environment
- Location
- Warehouse Clearance
- Top Bid [?]
- £ No bids yet
- Bidding closes [?]
- 30 September 2026 18:18 GMT
- Part of an Auction
- Warehouse Clearance
Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.
Machines & equipment for sale
- Surface Treatment
- Cleaning & Degreasing
- Polishing & Belt Linishing
- Mass Finishing
- Ovens & Furnaces
- Process Cooling
- Shot Blasting
- Dust & Fume Extraction
- Air Compressors
- Rectifiers & Transformers
- Miscellaneous
- Latest Stock
- Special Offers
- Direct From Site Clearances
- Auctions
- Brand New Machines
- Available Immediately
- Sell Your Machine
Machine Alert
Get the latest machines emailed directly to you as they become available to buy online. Sign Up Now
