Associated Mass Finishing Equipment
Canning 3 Gallon Heavy Duty Heated Spin Dryer
Canning 3 Gallon heavy duty Industrial heated spin dryer with Braked Motor and lid interlock.
- Stock No
- VZ1236J
- Category
- Associated Mass Finishing Equipment
- Model
- Canning 45 Kilo
- Year of Manufacture
- Upgraded
- New or Used
- Used (Second Hand)
- Capacity
- 3 Gallon / 14 Ltrs. 50 Kilo
- Type
- Centrifugal Dryer
- Other Info
- Work Basket 450 dia x 270 deep
- Refurbished Price [?]
- £ Login or Register for price.
Walther Trowal Centrifugal Waste Water Processing Plant with Integral Centrifugal Solid Dewatering Facility.
After vibratory finishing the effluent (dirty process water) contains abrasive and metal fines, frequently also oil and metals. For this reason, the effluent must be cleaned before going to drain or being recycled back to the finishing process
- Stock No
- VY1235
- Category
- Associated Mass Finishing Equipment
- Model
- Walther Trowal ZA06
- Year of Manufacture
- 2008
- New or Used
- Used (Second Hand)
- Capacity
- 2000 litres/hour
- Type
- Centrifugal sludge dewatering Separator
- Other Info
- Comprehensive waste water treatmet plant
Wheelabrator CMS-80 water metering and compound dosing system
The CMS-80 water metering and compound dosing system with freestanding control panel stand will let you situate your existing wall mounted control panel for optimum operator convenience and at the same time control the flow of water and liquid compound to your mass finishing machine.
- Stock No
- VY1234J
- Category
- Associated Mass Finishing Equipment
- Model
- Wheelabrator CMS-80
- Year of Manufacture
- 2019
- New or Used
- Used (Second Hand)
- Capacity
- Max 80 ltrs water flow
- Type
- Water & Compound Metering Station
- Other Info
- Control Panel Stand
- Sold As Seen Price [?]
- £ Login or Register for price.
Wheelabrator NEW Lid Only
The Wheelabrator Vibro RVS-2 extra deep acoustic noise reduction semi-enclosure can reduce processing noise levels significantly (reduction of up to 10 Db depending on media selection and component/s) over a standard lid. A very useful addition to the vibratory finishing process.
- Stock No
- VY1230J
- Category
- Associated Mass Finishing Equipment
- Model
- Wheelabrator RVS-2 Lid Only
- Year of Manufacture
- 2018
- New or Used
- Used (Second Hand)
- Capacity
- up to 220 litres or machine of Ø 1066mm
- Type
- Cover for bowl with separator to front
- Other Info
- Footprint 1600 x 3100 x 2400 mm
- Normal Retail Price [?]
- £ 2,750 (+ VAT)
- Direct Site Clearance Price [?]
- £ 1,450 (+ VAT)
- Clearance ends
- 04 June 2020 16:00 GMT while stocks last
- Part of a Direct Site Clearance
- Wheelabrator Vibro BRAND NEW Machinery Stock Clearance Phase Two
Wheelabrator SmartLine Waste Water Treatment
The Wheelabrator Vibro WCF-20 is designed for separating suspended solids from mass finishing effluent and other related waste water processes that require the removal of contaminates prior to drainage, removal or recirculation.
- Stock No
- VY1217J
- Category
- Associated Mass Finishing Equipment
- Model
- Wheelabrator WCF - 20
- Year of Manufacture
- 2017
- New or Used
- Used (Second Hand)
- Capacity
- To treat 1000 litres PH, 240 litre
- Type
- Centrifugal Waste Water Treatment System
- Other Info
- Footprint 1500 x 2400 x 2200 mm
- Normal Retail Price [?]
- £ 21,750 (+ VAT)
- Direct Site Clearance Price [?]
- £ 13,250 (+ VAT)
- Clearance ends
- 04 June 2020 16:00 GMT while stocks last
- Part of a Direct Site Clearance
- Wheelabrator Vibro Demonstration Bay Stock Clearance Phase One
Canning Centrifugal Drying Machine
A heated centrifugal dryer from the well known Canning range.
This product does not conform to the current H&S regulations as the brake mechanism allows operator access to work chamber. Upgrade to brake system required before suitable for the use at work.
- Stock No
- VY1200
- Category
- Associated Mass Finishing Equipment
- Model
- Canning 2435 B
- New or Used
- Used (Second Hand)
- Capacity
- 0.75 Gallon / 3.4 Ltrs
- Type
- Heated Centrifugal Dryer
- Other Info
- Basket 12"Ø x 8" deep (300mm x 200mm)
- Availability
- Available for immediate collection
- Sold As Seen Price [?]
- £ Login or Register for price.
Walther Trowal Semi Automatic Vibratory Bowl Maize Dryer
The Trowal model G range of vibratory driers have been designed to complete the finishing process by offering an effective means of drying wet components. This machine was originally used within a continuous processing line with VY1186 vibratory processing bowl, which provided wet processing and drying of products in a semi automatic process.
- Stock No
- VY1186
- Category
- Associated Mass Finishing Equipment
- Model
- Walther Trowal G200
- Year of Manufacture
- 1992
- New or Used
- Used (Second Hand)
- Capacity
- 200 Litres
- Type
- Mass parts maize drier
- Other Info
- Multi Pass Mass parts maize drier
Dr Ing Goessling Z1 Continuous Centrifuge Unit
The Goessling Z1 de-oiling centrifuges/washers were developed for the cleaning of massed produced formed parts. This is accomplished through smoothly accelerated centrifugal force with stop and start cycles, which aids the centrifugal process to produce a clean, de-oiled part.
- Stock No
- VX1174
- Category
- Associated Mass Finishing Equipment
- Model
- Dr Ing Goessling Z1
- New or Used
- Used (Second Hand)
- Capacity
- 8 kg
- Type
- Heated centrifugal dryer / de-oiler
- Other Info
- Automatic continuous feed.
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Rosler 'Z200 ASS-2-Turbo' Centrifuge
After vibratory finishing the effluent (dirty process water) contains abrasive and metal fines, frequently also oil and metals. For this reason the effluent must be cleaned before going to drain or being recycled back to the finishing process
- Stock No
- VW1158
- Category
- Associated Mass Finishing Equipment
- Model
- Rosler Z2000 ASS-2
- Year of Manufacture
- 2001
- New or Used
- Used (Second Hand)
- Capacity
- 2000 litre/hour
- Type
- 500 mm diameter Centrifuge
- Other Info
- 3 phase 400vac/11 kW
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Rosler 'Z2000 ASS-2-Turbo' Centrifuge
With the Rosler Z2000 Turbo Centrifuge the recycling of the process water from the finishing process not only reduces the consumption of water (up to 98 %), but it also reduces the usage of compound (up to 90 %) and the cost of waste disposal.
- Stock No
- VW1156
- Category
- Associated Mass Finishing Equipment
- Model
- Rosler Z2000 ASS-2 ASS-2-TURBO
- Year of Manufacture
- 2002
- New or Used
- Used (Second Hand)
- Capacity
- 2000 litre/hour
- Type
- 500 mm diameter Centrifuge
- Other Info
- 3 phase 400vac/11 kW
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Rosler R290/650 FB/T Belt Conveyor
Rosler R290/650 FB/T Belt Conveyor
Rosler Delicate Parts Transfer & Seperator
Rosler Delicate Parts Transfer & Separator
- Stock No
- VW1152D
- Category
- Associated Mass Finishing Equipment
- Model
- Rosler Type JD 50
- Year of Manufacture
- 2004
- New or Used
- Used (Second Hand)
- Type
- Linear vibratory transfer screen
- Other Info
- Width of screen
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Rosler Induction Transfer Chute
Rosler medium duty Vibrating Transfer Conveyor which is ideal for moving a wide range of free-flowing materials in food and chemical processing.
- Stock No
- VS991
- Category
- Associated Mass Finishing Equipment
- Model
- Rosler Vibrating Transfer Conveyor
- Year of Manufacture
- 2003
- New or Used
- Used (Second Hand)
- Type
- Inductive vibratory transfer
- Refurbished Price [?]
- £ Login or Register for price.
Winkworth Barrel Mixer
This pre owned Winkworth asymmetric barrel blender was designed for the mixing of pharmaceutical, food, chemical, plastic, ceramic, and metal powders, pellets or granules in their original drums.
Carl Kurt Walther SM4/10 Rotary screen
An Archimedes screw type parts screen ideal for continuous seperation of small parts and vibrtory media.
- Stock No
- VN601
- Category
- Associated Mass Finishing Equipment
- Model
- Carl Kurt Walther SM4/10
- New or Used
- Used (Second Hand)
- Capacity
- 400mm Ø
- Type
- Archimedes Screw
Alphamation Elevator
A traditional elevated conveyor with an electronically controlled variable speed discharge rate, coupled to a 250 mm wide steel slated uplifting belt conveyor for the controlled feed and transfer of parts.
Current discharge height of conveyor 2mtrs
- Stock No
- MY637
- Category
- Associated Mass Finishing Equipment
- Model
- Alphamation
- Year of Manufacture
- 2007
- New or Used
- Used (Second Hand)
- Capacity
- Variable Speed Conveyor width 250
- Type
- Automated slatted lift
- Other Info
- Mobile Unit
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Alphamation Swan Neck Elevator with Vibration Feeder
Swan neck conveyors in the precise feeding of components from a low level hopper to an elevated level for additional processes.
- Stock No
- MY636
- Category
- Associated Mass Finishing Equipment
- Model
- Alphamation Elevator with Vibration Feeder
- Year of Manufacture
- 2008
- New or Used
- Used (Second Hand)
- Capacity
- Vibro width 190 conveyor width 295
- Type
- Automated Feed Equipment
- Other Info
- Controlled feed / 2m lift
Pumping Station
The lifting station is a low height robust storage tank made from polyethylene with an angled bottom. The tank is designed to offer gravity feed with pumped return.
- Stock No
- MW575
- Category
- Associated Mass Finishing Equipment
- Model
- Pumping station
- New or Used
- Used (Second Hand)
- Type
- Buffer tank with stem pump
- Sold As Seen Price [?]
- £ Login or Register for price.
Wheelabrator Walther Trowal Model RSU ¾ Rotary Separator Unit
Wheelabrator Walther Trowal Model RSU ¾ Rotary drum media – spruce - screening separator unit
- Stock No
- MS348
- Category
- Associated Mass Finishing Equipment
- Model
- Wheelabrator RSU3/4 Drum Separator
- Year of Manufacture
- 1992
- New or Used
- Used (Second Hand)
- Capacity
- 900 x 1400 mm long
- Type
- Rotary sprue / media screening separtor
- Other Info
- Rotary screening separator
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Mobile Belt Transfer Loader
An innovative mobile belt fed product transfer conveyor, with adjustable height and multi access point storage hopper
- Stock No
- VY1231
- Category
- Miscellaneous
- Model
- Mobile Process Plant Auto Feeder
- New or Used
- Used (Second Hand)
- Capacity
- Variable loads / height
- Process Application
- product feed conveyor
- Other Info
- Feed conveyor belt discharg 130 x 1200
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Walther Trowal Automatic High Energy Parts Finishing Machine
A Walther Trowal TT90 High Energy Disc Systems have been developed for the polishing, deburring and radiusing of small parts in the shortest possible processing time.
- Stock No
- VY1201
- Category
- Vibratory Deburring & Polishing Machines
- Model
- Walther Trowal TT90
- Year of Manufacture
- 1987
- New or Used
- Used (Second Hand)
- Capacity
- 90Ltrs
- Type
- High energy centrif semi auto tip unload
- Other Info
- Dosing pump & panel inc variable speed
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Acton UK Manufactured Heavy Duty Vibratory Finishing Bowl
Acton VB 20 vibratory finishing bowl. The bowl allows the processing of a wide range of components using various types of media. The bowl is complete with a full acoustic lid, control panel and dosing unit.
- Stock No
- VY1191
- Category
- Vibratory Deburring & Polishing Machines
- Model
- Acton Vibrota VB20
- New or Used
- Used (Second Hand)
- Capacity
- 20 Cu ft / 565 ltrs
- Type
- Bowl Vibrator / Manual Separation
- Other Info
- Cast Polyurethane Lining
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Rosler Z2000 ASS-2-Turbo' Centrifuge
With the Rosler Z2000 ASS-2-Turbo' Peeling Centrifuge abrasive and metal fines as well as trapped oil are separated from process waters by way of centrifugal force and can then be removed as a semi dry mud.
- Stock No
- VW1157
- Category
- Associated Aqueous Cleaning
- Model
- Rosler Z2000 ASS-2 Turbo
- Year of Manufacture
- 2002
- New or Used
- Used (Second Hand)
- Work Envelope (WxDxH mm)
- 500 mm diameter Centrifuge
- Other Info
- 3 phase 400vac/11 kW
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Dreher CraneCare Lift N Load Hoist
A lift and load device built by CraneCare to work in conjunction the the Dreher VT 5 range of machines (Our stock number VT1037 A & B) for replenishing the media and parts into the processing bowls.
- Stock No
- VT1047A
- Category
- Barreling & Rumbling Machinery
- Model
- Dreher Media transport system
- Year of Manufacture
- 1986
- New or Used
- Used (Second Hand)
- Capacity
- 100kg
- Type
- Loading hopper with vertical lift system
- Other Info
- Dreher VTS Suport Equipment
- Sold As Seen Price [?]
- £ Login or Register for price.
Micronics Model 250 1 - EBR,Sidebar Filter Press, 29 Chamber x 25 mm Cake. 7 Bar
- Stock No
- TX213J
- Category
- Associated Process Plant & Equipment
- Model
- 250 1-EBR
- Year of Manufacture
- 2008
- New or Used
- Used (Second Hand)
- Work Envelope (WxDxH mm)
- 250 x 250
- Other Info
- Small section large capacity
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
JWI 5 Plate Dewtering Filter Press
Designed to optimise performance and minimise labour, the Small Capacity sled mounted portable J-Press Filter Press features a hydraulic closure system, Standard corner feed polypropylene filter plates and cake thicknesses for versatile performance, manual plate shifting to minimise labour requirements.
- Stock No
- TX212J
- Category
- Associated Process Plant & Equipment
- Model
- 320 G32-2-2-02MA
- New or Used
- Used (Second Hand)
- Work Envelope (WxDxH mm)
- 320 x 320
- Other Info
- Hydraulic Closing
Automated Packaging Systems Auto Bagging Machine with Bag print facility
A semi automatic bagging machine ideal for sealing components or parts into bags, printing information onto each bag and storing the set up data to enable quick changeovers.
- Stock No
- MY646
- Category
- Miscellaneous
- Model
- Automated Packaging Systems AB145
- Year of Manufacture
- 2003
- New or Used
- Used (Second Hand)
- Capacity
- Bag width 200mm
- Process Application
- Semi auto bagging & bag print facility
- Other Info
- Universal bagging auto identify facility
Macfuge Centrifugal Separator with Automatic Discharge
This self cleaning, centrifugal spinner with automatic discharge is designed to separate liquids of differing viscosity or solids from liquids by way of centrifugal spinning action.
- Stock No
- MY639
- Category
- Miscellaneous
- Model
- Macfuge 260 OMPT5C
- Year of Manufacture
- 2012
- New or Used
- Used (Second Hand)
- Capacity
- Variable media dependent.
- Process Application
- Centrifugal separation-solids / liquids.
- Other Info
- Universal centrifugal separation.
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Yabez Ltd Stepper Feeder
Step feeders have been designed to be robust and reliable for handling bulky heavy components, oil and other harsh materials on the surface of the product are possible for feeding and orientation.
Master Fluid Solutions Xybex Coolant Cleaner
XYBEX® Coolant Recycling Systems represent the state-of-the-art in coolant recycling and benefit directly from Master Fluid Solutions`s more than twenty years experience in coolant recycling
- Stock No
- MY623
- Category
- Miscellaneous
- Model
- Master Fluid Solutions System 1000
- New or Used
- Used (Second Hand)
- Capacity
- 1720 x 1270 x 660
- Process Application
- 2
- Other Info
- bottom tank 2400 x 1280 x 600 t
- Sold As Seen Price [?]
- £ Login or Register for price.
Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.
Machines & equipment for sale
- Surface Treatment
- Cleaning & Degreasing
- Polishing & Belt Linishing
- Mass Finishing
- Ovens & Furnaces
- Process Cooling
- Shot Blasting
- Dust & Fume Extraction
- Air Compressors
- Rectifiers & Transformers
- Miscellaneous
- Latest Stock
- Special Offers
- Direct From Site Clearances
- Auctions
- Brand New Machines
- Available Immediately
- Sell Your Machine
Machine Alert
Get the latest machines emailed directly to you as they become available to buy online sign up
