Associated Heat Treatment Equipment
To go alongside our heat treatment machines, we stock a variety of supporting equipment for assisting and upgrading your process applications such as data loggers, conveyor process lines, generators and continuous drying machines.
ACS Angelantoni DM600 E Environmental Chambers - 3 Available
The DM600 E Environmental Chambers, from Angelantoni Test Technologies’ Discovery My “E” Series, is designed for reliable general purpose environmental testing where stable climatic conditions and moderate temperature change rates are required.
- Stock No
- ACS500
- Category
- Associated Heat Treatment Equipment
- Model
- ACS Angelantoni DM600 E
- Year of Manufacture
- 2023
- Internal Size (WxDxH mm) [?]
- 850 × 730 × 892mm
- Max Temp
- -20°C to +180°C
- Other Info
- 553 Litres
- Condition
- Brand New, Excellent Condition, Unused, Current Model
- Location
- Wetherby, Leeds, UK
- Price [?]
- Please call on +44 (0) 1922 45 8000
- Part of a Direct Site Clearance
- Unused Environmental Chambers & Incubators Clearance – Preliminary Announcement
LTE Natural Convection Electric Drying Cabinet
A natural convection electric cabinet with a max temperature of 85°C, this LTE drying cabinet is manufactured from stainless steel with toughened glass sliding doors. Also featuring two stainless steel shelves with 35 shelf positions & a 180 litre capacity.
LTE Natural Convection Electric Drying Cabinet
A natural convection electric cabinet with a max temperature of 85°C, this LTE drying cabinet is manufactured from stainless steel with toughened glass sliding doors. Also featuring two stainless steel shelves with 35 shelf positions & a 180 litre capacity.
ELKOM UK Ltd Industrial Heated / Warming Table
Elkom GmbH manufactured heated/warming table for warming or heating, or composite curing. Warm table to a pre-determined temperature, adjustable up to 200°C. Used in the aircraft Industry once previously.
ACS Angelantoni Thermal Shock Testing Chamber
A thermal shock twin chamber testing machine used for verifying the reliability of electronic materials, industrial or pharmaceutical products that are subject to temperature variations.
- Stock No
- OD2578
- Category
- Associated Heat Treatment Equipment
- Model
- ACS Angelantoni CST 84 2T
- Year of Manufacture
- 2001
- Internal Size (WxDxH mm) [?]
- 330 x 330 x 475 Basket Capacity
- Max Temp
- -80°C to 220°C
- Other Info
- R404a and R23 Refrigerant Gases
- Condition
- From a working environment, Excellent Condition
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
JLS (Redditch) Ltd Furnace Retort with Sealing Lid Oxygen Free Heat Treatments
A welded steel retort suitable for heat treating a wide variety of materials when placed inside a suitable oven or furnace. The retort is welded onto a base for stability and also allowing for FLT lifting. The lid is furnished with fixing points for bolting down to the pot and also has a lifting bar for ease of removal.
- Stock No
- OD2539J
- Category
- Associated Heat Treatment Equipment
- Model
- JLS (Redditch) Ltd 1500 Litre
- Year of Manufacture
- 2013
- Internal Size (WxDxH mm) [?]
- Ø905 x 1015mm
- Max Temp
- Furnace Dependent
- Other Info
- Welded Steel Structure including Base
- Condition
- From a working environment, Excellent Condition
- Location
- Rolls Royce stores Unit 6
- Sold As Seen Price [?]
- £ Login or Register for price.
Eurotherm Oven Data Logger, PID Temperature Controller and Pendent
Upgrade your existing oven with this Eurotherm 6180 data logger and Eurotherm 3508 PID temperature controller, complete with a movable pendent arm for operator comfort.
Linde Material Handling Cryoflex Through Feed Mesh Conveyor Flat Bed Tunnel Process Line
For continuous processes, Linde have developed a special tunnel solution, which is installed in front of the tempering unit. Supporting line speeds of 0.07–0.33 m/min, it is the ideal way to cool small parts with a maximum height up to 125 mm.
Temperature range: room temperature to –100 °C
- Stock No
- OZ2105
- Category
- Associated Heat Treatment Equipment
- Model
- Linde Material Handling CTF/A4-60
- Year of Manufacture
- 2014
- Internal Size (WxDxH mm) [?]
- 600 x 3300 x 75mm working height
- Max Temp
- Upgrade to 300°C tempering & 60°C Drying
- Other Info
- Very flexible, up gradable equipment
- Condition
- Excellent Condition, Current Model, Seen powered at RSW
Fibrex Heat Treatment Plants Endothermic Gas Generator
The Endothermic gas generator produces the protective gas that is used in some heat treating processes and furnaces. The atmosphere is prepared by the mixing of hydrocarbon natural town gas, with air.
Tutco Farnam Inline FT400 Process Heater
Flow Torch™ 400 is an open coil air heater designed for high flow rates at low pressure drop due to its efficient design with minimal flow restrictions. The robust construction of this 6” diameter stainless steel heater offers reliable long-life performance and reduced operational cost.
Tutco Farnam Inline FT600 Process Heater
Flow Torch™ 600 is an open coil air heater designed for high flow rates at low pressure drop due to its efficient design with minimal flow restrictions. The robust construction of this 6” diameter stainless steel heater offers reliable long-life performance and reduced operational cost.
Aerogen Flame Treatment System
Flame treatment is a surface treatment process used to chemically modify a plastic container's surface for better label adhesion. This process uses specially designed equipment to create a controlled blend of natural gas and air that produces a flame.
Lanemark Combustion Engineering Ltd Burner FDGAN-3 Natural Gas Burner
The FD range of burners are forced draught burners designed for industrial process air heating requirements. Short flame lengths, exceptional flame stability and accurate turndown as low as 9 kW (30,000 Btu/h) are achieved by the unique Lanemark cone design combustion head.
Linn High Therm GmbH Microwave High Temperature Chamber Furnace
This high power microwave furnace was designed especially for powder metallurgical processes such as ashing, calcination, melting and sintering. The chamber is gas and vacuum tight with special safety features to protect the operators from emerging microwave radiation. Includes several optional extras.
- Stock No
- OD2552J
- Category
- Industrial Furnaces
- Model
- Linn High Therm GmbH MKH-7,2
- Year of Manufacture
- 2016
- Internal Size (WxDxH mm) [?]
- Useful Volume 27L, Chamber 156L
- Max Temp
- 1800°C // 1700°C Continuous
- Other Info
- 7.2kW of Microwave Power
- Condition
- From a working environment, Excellent Condition, Current Model
- Sold As Seen Price [?]
- £ Login or Register for price.
Lanemark Combustion Engineering Ltd FDGAN-3 Natural Gas Burner
The FD range of burners are forced draught burners designed for industrial process air heating requirements. Short flame lengths, exceptional flame stability and accurate turndown as low as 9kW (30,000 Btu/h) are achieved by the unique Lanemark cone design combustion head.
Lanemark Combustion Engineering Ltd FDGAN-3 Natural Gas Burner
The FD range of burners are forced draught burners designed for industrial process air heating requirements. Short flame lengths, exceptional flame stability and accurate turndown as low as 9kW (30,000 Btu/h) are achieved by the unique Lanemark cone design combustion head.
Kuka KR 120 R2700 extra HA Robot & KRC4 Controller
The extremely compact, 6-axis, KUKA KR 120 R2700 Extra HA robot is ideal for conquering those jobs that require high accuracy and extreme precision. Suitable for a variety of applications, including lasers, palletizing, assembly, spot welding, and more! The KUKA KR 120 R2700 features a 120 kg payload and +/-0.05mm repeatability. Little use.
Ebara Corporation Dry Vacuum Pump
The dry vacuum pump is a screw type consisting of a pair of rotating none contact rotors in the main pump and a booster pump and which are connected in series.
N2 gas and water cooling is required with the control circuit monitors multiple features during operation, having an earth leaker breaker and electro-magnetic switch.
Centrotherm Gas Fume Scrubber
Centrotherm FLM Waste Gas Abatement System cleaning waste gas via burning, wet scrubbing and aerosol retention.
Thermotron Environmental Chamber
A used Thermotron Temperature and Humidity model SM-16 Test Chamber.
When extreme temperature testing is required, the SM-16 offers ultimate flexibility for your materials testing needs. Please see attached service engineers report.
Thermotron Environmental Chamber
A used Thermotron Temperature model SM-8 Test Chamber.
When extreme temperature testing is required, the SM-8 offers ultimate flexibility for your materials testing needs.
Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.
Machines & equipment for sale
- Surface Treatment
- Cleaning & Degreasing
- Polishing & Belt Linishing
- Mass Finishing
- Ovens & Furnaces
- Process Cooling
- Shot Blasting
- Dust & Fume Extraction
- Air Compressors
- Rectifiers & Transformers
- Miscellaneous
- Latest Stock
- Special Offers
- Direct From Site Clearances
- Auctions
- Brand New Machines
- Available Immediately
- Sell Your Machine
Machine Alert
Get the latest machines emailed directly to you as they become available to buy online. Sign Up Now
