Electroplating equipment & treatment lines
Rodway & Taylor Effluent Treatment Plant. ph Correction and Flocculant Sludge Settlement.
Rodway & Taylor Effluent treatment plant with ph correction flocculant, sludge settlement for transfer to de-watering press.
- Stock No
- TZ258
- Category
- Electroplating & treatment lines
- Model
- Rodway & Taylor ph Correction and Sludge Settlement Plant
- Work Envelope (WxDxH mm) [?]
- 500 Gallons/Hr
- Process Stages
- Multiple
- Other Info
- Double V cone Mild Steel Settlement Tank
- Condition
- From a working environment, Seen working by RSW
- Availability
- Available for immediate collection
- Sold As Seen Price [?]
- £ Login or Register for price.
Beckox Manual Plating Line Four- Zinc Cobalt & Aluminium Pre-treat
Professionally Manufactured Beckox Manual Immersion Treatment Plant including Process Support Equipment, Heating, Rectification, Filters Air Agitation etc.
17 Station Pre-treatment Manual Electroplating Line
- Stock No
- LIN404
- Category
- Electroplating & treatment lines
- Model
- Beckox 17 Station Pre-treatment Manual Electroplating Li
- Work Envelope (WxDxH mm) [?]
- 2200 x 640 x 700 (Treatment Tanks)
- Process Stages
- 17
- Other Info
- Electroless Nickel/Nitric Acid Strip
- Condition
- Seen working by RSW, Good Condition
- Location
- Whitstable, Kent, UK
- Price [?]
- Please call on +44 (0) 1922 45 8000
- Part of a Direct Site Clearance
- Used Plating Lines
Plasticraft Bright Nickel Plating Line with Ancillary Equipment.
This line is constructed as a mix of polypropylene insulated and stainless steel lined Tanks. The Nickel tank has an Eductor system supplied with the Eductors and filter pump. There is also a removable air agitation coil that has a raised section at each end allowing this to be removed from the tank without having to drain the nickel solution.
- Stock No
- HSE500
- Category
- Electroplating & treatment lines
- Model
- Plasticraft Bright Nickel Plating Line
- Year of Manufacture
- 2012
- Work Envelope (WxDxH mm) [?]
- 900 x 600 x 900
- Process Stages
- 6
- Other Info
- Rectifier 200 amp 8 Volt
- Condition
- From a working environment, Seen working by RSW, Excellent Condition
- Location
- Buxton, Staffordshire, UK
- Direct Site Clearance Price [?]
- £ Login or Register for price.
- Clearance ends
- 05 August 2021 15:00 GMT while stocks last
- Part of a Direct Site Clearance
- Plasticraft Bright Nickel Plating Line with Ancillary Equipment
Rodway & Taylor 9 Stage Multi Purpose Immersion Treatment Plant
9 Stage Multi Purpose Immersion Treatment Plant with associated Effluent Treatment Plant. Tanks are a mixture of Stainless and Mild steel. Suitable for a wide range of immersion processes.
- Stock No
- POW200
- Category
- Electroplating & treatment lines
- Model
- Rodway & Taylor 9 Stage Multi Purpose Immersion Treatment Plant
- Year of Manufacture
- 1995
- Work Envelope (WxDxH mm) [?]
- 2400 x 1000 x 1500
- Process Stages
- 9
- Other Info
- Semi Automatic Single transporter
- Condition
- From a working environment, Good Condition
- Location
- Birmingham, UK
- Direct Site Clearance Price [?]
- £ Login or Register for price.
- Part of a Direct Site Clearance
- Multi-Stage Immersion Treatment Line
Metal Finishing Services Effluent Treatment Plant
** Unexpectedly re-available - customers projected manufacturing plans changed **
A well made Effluent Treatment Plant used for Ph correction and hexavalent chrome reduction, however can be used for a multitude of chemical treatment processes.
- Stock No
- TZ253
- Category
- Electroplating & treatment lines
- Model
- Metal Finishing Services Dual Stream ETP
- Work Envelope (WxDxH mm) [?]
- Largest tank 1700 x 1750 x 3280
- Process Stages
- 4
- Other Info
- Fully Automated
- Condition
- Good Condition
- Sold As Seen Price [?]
- £ Login or Register for price.
PMD 7 Stage Plating Line / High Speed Plating Line
This flexible 7-stage plating line with cleaner, pre-treatment, electrolytic and rinse stations lends itself to a wide variety of applications including the current configuration of a high speed plating line. Having six heated and extracted stations adds to it's potential versatility
- Stock No
- TZ236S
- Category
- Electroplating & treatment lines
- Model
- PMD High speed plating line
- Year of Manufacture
- 2001
- Work Envelope (WxDxH mm) [?]
- 600 x 500 x 1000
- Process Stages
- 7 Stages
- Other Info
- Inc.Pre-treatment & 3 electroplate tanks
- Condition
- From a working environment, Seen working by RSW, Excellent Condition
- Sold As Seen Price [?]
- £ Login or Register for price.
Chem Resist Bunded Acid Chemical Storage Tank & Tank Vent Fume Scrubber
Bunded Acid Chemical Storage Tank And Tank Vent Fume Scrubber
- Stock No
- TY239J
- Category
- Electroplating & treatment lines
- Model
- Chem Resist
- Year of Manufacture
- 2011
- Other Info
- Working volume 13.75 m3
- Condition
- From a working environment
- Location
- Arriving in our warehouse soon
- Sold As Seen Price [?]
- £ Login or Register for price.
Sessler 8 Station Automated Pre Treatments Line
Sessler 8 Station Automated pre treatments process line
- Stock No
- HEUN001
- Category
- Electroplating & treatment lines
- Model
- Sessler
- Work Envelope (WxDxH mm) [?]
- 1,000 x 1,500 x 1,000
- Process Stages
- 8 stage pre treatments process line
- Sold As Seen Price [?]
- £ Login or Register for price.
Gee and Company Platinum Plating Line
Platinum Plating Line. The equipment is arranged in a straight line with the Load/Unload station at one end for efficiency of operation. The work is carried automatically through the line by an enclosed transporter complete with blow down fans for fume control and motorised raise lower and traverse speed controlled via inverter drives.
- Stock No
- PLA500
- Category
- Electroplating & treatment lines
- Model
- Gee and Company Straight Line Automatic Plant
- Year of Manufacture
- 2015
- Work Envelope (WxDxH mm) [?]
- 850 x 1000 x 650
- Process Stages
- 10
- Other Info
- Plant Output: 1 flight bar every 25 Mins
- Condition
- Seen working by RSW, Excellent Condition
- Location
- Rolls Royce stores, near Derby, UK
- Price [?]
- Please call on +44 (0) 1922 45 8000
- Part of a Direct Site Clearance
- Automatic, Immersion Treatments, Platinum Plating Line
Gee and Company Manual Platinum Post Treatment & Flushing Line
Manual Platinum Post Treatment & Flushing Line. Designed to support the application of Platinum Plating on Turbine Blades but offering the possibility of conversion to process other high value components. Manufactured by Gee & company in association with Surface Finishing Engineering.
- Stock No
- PLA300
- Category
- Electroplating & treatment lines
- Model
- Gee and Company Straight Line Manual Plant
- Year of Manufacture
- 2015
- Work Envelope (WxDxH mm) [?]
- 800 x 800 x 650
- Process Stages
- 7
- Other Info
- 125kg SWL electric hoist pendant control
- Condition
- Seen working by RSW, Excellent Condition
- Location
- Rolls Royce stores, near Derby, UK
- Price [?]
- Please call on +44 (0) 1922 45 8000
- Part of a Direct Site Clearance
- Automatic, Immersion Treatments, Platinum Plating Line
Multi-stage Aqueous Stainless Steel Immersion Process Cleaning Line
Multi-stage Aqueous 4 Tank. All Stainless Steel Immersion Process Cleaning / Coating Line with Integrated twin level extraction ducting control panel
- Stock No
- DA1366
- Category
- Associated Aqueous Cleaning
- Work Envelope (WxDxH mm) [?]
- Each tank 600 x 600 x 600
- Process Stages
- 4
- Other Info
- Integrated dual level extraction ducts
- Condition
- From a working environment, Excellent Condition
- Location
- Rolls Royce stores, near Derby, UK
- Availability
- Available for immediate collection
- Sold As Seen Price [?]
- £ Login or Register for price.
CPS Multi Function Wet Etching & immersion treatment Bench
The CPS wet bench is a valuable process tool used to carry out wet cleaning and etching operations in semiconductor manufacturing or other high technology.
- Stock No
- TZ267
- Category
- Associated Process Plant & Equipment
- Model
- CPS Laboratory Scale Treatments
- Work Envelope (WxDxH mm) [?]
- 250 x 250 x 210 x 4 + 2 x500 x 260 x 210
- Process Stages
- 6 Wet Stations
- Other Info
- See images. Extensive process support.
- Condition
- Seen working by RSW, Excellent Condition, Current Model
- Price
- Please call on +44 (0) 1922 45 8000
Lamarflo Electroless Plating and multiple option wet Bench
Lamarflo Electroless Plating Bench From the:-
Semiconductor
Solar
MEMS
LED
Bio-Medical
- Stock No
- TZ269
- Category
- Associated Process Plant & Equipment
- Model
- Lamarflo Flexible Wet Treatment Bench
- Work Envelope (WxDxH mm) [?]
- Each Stage 220 x 275 x 220
- Process Stages
- 8
- Other Info
- Built to exceptional qualtiy standards
- Condition
- Seen working by RSW, Excellent Condition
- Price
- Please call on +44 (0) 1922 45 8000
CPS Electroless Plating Bench for numerous wet treatments
CPS Electroless Copper Plating Bench consists of a 6 station wet cleaning and electroless plating process, with 3 pre-treatment stations and 3 electroless plating stations respectively. This process is commonly used in semiconductor manufacturing or other high technology products.
- Stock No
- TZ270
- Category
- Associated Process Plant & Equipment
- Model
- CPS Wet Immersion Treatment Bench
- Work Envelope (WxDxH mm) [?]
- 300 x 300 x 200 x 8off
- Process Stages
- 8
- Other Info
- See images exceptional process support
- Condition
- Seen working by RSW, Excellent Condition
- Price
- Please call on +44 (0) 1922 45 8000
Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.
Machines & equipment for sale
- Surface Treatment
- Cleaning & Degreasing
- Polishing & Belt Linishing
- Mass Finishing
- Ovens & Furnaces
- Process Cooling
- Shot Blasting
- Dust & Fume Extraction
- Air Compressors
- Rectifiers & Transformers
- Miscellaneous
- Latest Stock
- Special Offers
- Direct From Site Clearances
- Auctions
- Brand New Machines
- Available Immediately
- Sell Your Machine
Machine Alert
Get the latest machines emailed directly to you as they become available to buy online sign up
