skip to main content

Riley Surface World uses cookies to give you the best experience on our website. If you continue we assume that you consent to receive cookies on our website. Read More

X
Machines & equipment for sale

Dust Control Environmental Tornado 16 Xcell R Reverse Jet Cartridge Filter Dust Extractor

Used / Second Hand

Sold As Seen Price [?]
£ Login or Register for price
Availability:
In stock now
Condition
From a working environment, Seen working by RSW, Good Condition
Stock No
EA1867J
Manufacturer
Dust Control Environmental
Model
Tornado 16 Xcell R Atex
Year of Manufacture
May 2018
Serial
1660
Condition
From a working environment, Seen working by RSW, Good Condition
Approx Duty CFM / M³/Hr
9,900 // 16,750
Filter Area ft² / m²
2329 // 232
Other Info
15kw Fan
Location
Our Central Warehouse, Aldridge, UK
Weight (kgs)
2500
External Dimensions (WxDxH mm) [?]
2,200 x 2,200 x 5,550

Description

Tornado 16 Xcell R Reverse Jet Cartridge Filter Dust Extractor

The DCE Tornado dust collector is used for the collection of airborne dust and particulate matter.
The filter cartridge elements are automatically cleaned. Each row of elements being temporarily out of action while the others remain in operation.
The Tornado Xcell R dust collector is fitted with standard size elements 0325 x 1400mm.
Cleaning of the filter elements can be adapted relative to each individual dust type & volume to be handled.

Working Principle
In normal working operation dust laden air enters the filter through the gas inlet box or open base of the unit dependant upon model designation and coats the outsides of the filter elements. The filtered air flows through the centre of the cartridges into the clean air plenum where it exits the filter via the fan set & acoustic silencer (fan ventilator type) or through a side outlet grille with cowl (vent type).

The filter elements are automatically cleaned with aid of an electronic circuit board which activates the remote solenoids mounted on the end of each diaphragm valve. Upon activation of the solenoid the diaphragm valves open allowing a certain volume of compressed air through a blow tube with jet nozzles directing compressed air down the inside of each filter element.

The compressed air pulse - with the induced air added to it - flows through the filter element and filter media in the opposite direction to the normal airflow. The result is that the dust built up on the outer surface of the filter elements is blown off and falls into the collection hopper.

The air pulse lasts for approximately 80-200 milliseconds after which the diaphragm valve closes and the filter elements become back on line.

BRIEF SPECIFICATION

• Tornado 16 Xcell R reverse jet cartridge filter c/w rotary valve discharge and 1 x 45 gallon drum waste collection
• Pedestal floor mounted fan set c/w 15kW motor
• 400mm diameter ST1 ATEX non return valve
• 400mm diameter in-line spark trap c/w rotary valve & 45 gallon drum waste collection
• Spare 45 gallon drum
• Interconnecting ductwork between the filter unit and the 450mm Ø connection positioned on the outside of the metal spray enclosure at low level

APPLICATION DETAILS

Application

Zinc metal spray

Application

Zinc metal spray

Air volume

9,900m3/hr

Static pressure

345mm wg

Relative humidity

Ambient

Ambient temperature

20°C

Maximum product/conveying temperature

50°C

Ambient temperature range

-10°C to +40°C

Dust load

Light to medium

Type of dust

Zinc metal spray

Filter location

External

ST rating/Kst value

Assumed to be ST1/Kst <199 bar.m/s

Pmax of dust

<8 bar.g

ATEX Zone (inside ‘dirty air’ chamber)

Zone 20

ATEX Zone (inside ‘clean air’ chamber)

Zone 22

ATEX Zone (filter location)

Non Zone

 

 

 

FILTER SPECIFICATION

Filter reference: Tornado 16 Xcell R
Filter type: Reverse jet cartridge filter
Filter area: 710.4sq.m
Filtration velocity: 0.19m/min
Filter cartridge withdrawal: From the front
Filter media access: Hinged front access doors with compressed latches
No. and length of filter cartridges: 16 off x 1400mm long
Filter media: Nano web flame retardant cellulose
Efficiency: 99.997% at 5 micron
Dust loading: 3g/M3/hr
Dust carryover: 3mg/m3
Maximum air temperature: +50°C
Compressed air tank: 150mm Alutank c/w 1” BSP female connection size
Pulse diaphragms: Immersion type c/w integrated electronic solenoids
Noise output: Average 75db(A) Peak 90db(A) free field
Pulse sequencer: S Series DP Series pressure differential controller c/w connections to dirty air and clean air sides (dirty air side c/w filter)
Display output: Digital blue backlit LCD display
Supply for pulse sequencer: 110/220/230v 1ph 50Hz
Compressed air requirement: Compressed air requirement: 28.44Nm3/hr of clean and dry compressed air supplied at a pressure of 6.0bar.g
Filter body: 3mm mild steel
Hopper and legs: 3mm, 5mm mild steel and mild steel sections
Hopper discharge: Single pyramid hopper
Discharge/product collection: rotary valve c/w 0.75kW motor and 1 x 45 gallon drum
Lifting eyes: Included
Ductwork connection: 1 x 400mm  Ø
Explosion relief panel: Included c/w burst indication switch
Bray isolation valves at base of pyramid hoppers: Included
Paint specification: RAL 7021 textured finish (powder coated)
Weatherproofing: Suitable for external location
Special features:-
Increased filter strength to 0.35 bar.g
Vertical explosion relief discharge
Norgren filter regulator/mechanical trap included (fitted to compressed air header tank)
Oversized gas inlet hood

FAN SPECIFICATION

Fan reference: CM7 500T4
Fan performance: 9,900m3/hr at 345mm wg
Fan motor size and manufacturer: 15kW WEG
Spark minimised fan inlet: Included
Motor voltage: 400v 3ph 50Hz
Air silencer: Pod type air silencer included on the fan exhaust
Noise breakout: <85db(A) @ 1.5m free field range
Designation: Close coupled integral fan set
Fan mounting: Inlet mounted to top of filter unit
Drive arrangement: Direct driven
Motor speed: 2930 rpm

IN-LINE SPARK TRAP SPECIFICATION

400mm diameter
Heavy gauge mild steel construction
Simple mild steel floor support painted after manufacture
Chute to rotary valve
45 gallon drum c/w lid and flexible connection
Spare 45 gallon drum

ATEX ST1 RATED NON RETURN VALVE

400mm diameter c/w flanged connections
ST1 rated
Mild steel heavy gauge construction painted after manufacture
Simple mild steel floor support painted after manufacture

INTERCONNECTING DUCTWORK

1 x 2m length of 400mm dia heavy gauge mild steel flanged duct. This duct will be fitted between the filter unit inlet and the ATEX non return valve. The in-line spark trap will then to be fitted on the opposite side of the ATEX non return valve
One set of 400mm diameter galvanised mild steel clipped together ductwork between the in-line spark trap and the low level extract connection on the outside of the metal spray enclosure.
One set of 400mm dia clean air ductwork from the fan set discharge air silencer to discharge the air vertically 3m above eaves height

FAN/FILTER STARTER/CONTROL PANEL

Star delta fan starter included c/w mild steel painted enclosure, MCB’s, isolator, single phase supply for pulse sequence control panel c/w over run timer, start/stop buttons and stop sequence circuit on explosion panel activation. The control panel will be supplied loose for installation in a safe, internal non zoned area by others.

 Overall footprint of current installation

8,800 x 2,200 x 7,775mm (w x d x h)

 

 

 

 

pdf icon Print / Download Dust Control Environmental Tornado 16 Xcell R Reverse Jet Cartridge Filter Dust Extractor Datasheet

Additional files

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.