skip to main content

Riley Surface World uses cookies to give you the best experience on our website. If you continue we assume that you consent to receive cookies on our website. Read More

X
Machines & equipment for sale

Sweco Vibro-Energy Finishing Mill 10ft³/280 Litre, Circular Bowl Mass Component Part Finishing Machine

Used / Second Hand

Refurbished Price [?]
£ Login or Register for price
Sold As Seen Price [?]
£ Login or Register for price
Availability:
In stock now
Condition
Good Condition
Stock No
VZ2165
Manufacturer
Sweco
Model
FM10-V
Serial
FM1011916C
Condition
Good Condition
Capacity
10ft3 / 280 Litres
Type
5Hp,1200rev/min 3000lb off balance drive
Other Info
Lining 3/4" Cast Polyurethane Elastomer
Location
Our Central Warehouse, Aldridge, UK
Weight (kgs)
500 + 280
External Dimensions (WxDxH mm) [?]
1220 dia x 1100

Description

Finishing Mill Batch Series

These 10 cubic foot batch units offer all the advantages of the unique Vibro-Energy® finishing plus new design features for easier operation and even more efficiency.  FM-10-C model provide users with a curved wall chambers to tailor the finishing process to particular types of parts. Adjustments in finishing action are easily made by varying lead angle and motor weight settings. No tools are required for such adjustments. Operation is easier, too, because these new units are provided with redesigned compound introduction systems and hand adjustable flow controls, both mounted on the Finishing Mill. The poppet-controlled drain makes possible numerous process adjustments. Sound levels have been reduced by the use of special materials and new fabrication techniques. The sound suppressor cover offers even lower operating sound levels. The complete spectrum of finishing, from rough to delicate, can be quickly and efficiently handled by these batch units. They will process a wide range of material: metal, plastic, ceramic, or elastomer parts. With the proper media, they will perform deburring, flash removal, edge-breaking, metal clean-up, rough surface work or pre-paint finishing - even radiusing or precision surface reduction. They are also ideal for ball burnishing.

Capacity

  • 10ft³.
  • 1360Kgs max load.
  • Max straight part length 24".
  • Bowl Dims = 335mm width x 350mm deep.

 Features

  • Lining 3/4"  /  20mm Cast Polyurethane Elastomer abrasive resistant lining
  • Aqua HC 100 solenoid driven dosing pump.
  • Total Acoustic surround.
  • Large easy open exit bung for rapid part on part discharge.
  • Over bowl light.

 

pdf icon Print / Download Sweco Vibro-Energy Finishing Mill 10ft³/280 Litre, Circular Bowl Mass Component Part Finishing Machine Datasheet

Additional files

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.