skip to main content

Riley Surface World uses cookies to give you the best experience on our website. If you continue we assume that you consent to receive cookies on our website. Read More

X
Machines & equipment for sale

Delmet Vertical pack Tower Fume Control Plant

Direct From Site Clearance

Direct Site Clearance Price [?]
£ 20,000 (+ VAT)
Clearance ends
25 February 2021 16:00 GMT while stocks last
Decommissioning,
Moving & Loading Contribution [?]
£ 5,000 (+ VAT) will be added to your invoice
Part of a Direct Site Clearance
Heatrae Sadia
Condition
From a working environment, Seen working by RSW, Excellent Condition
Location
Norwich, Norfolk, UK
Stock No
HEA200
Manufacturer
Delmet
Year of Manufacture
2011
Condition
From a working environment, Seen working by RSW, Excellent Condition
Approx Duty CFM / M³/Hr
7,000 CFM //12,000 M3/Hr
Other Info
pH control & acid neutraliser dosing
Location
Norwich, Norfolk, UK
External Dimensions (WxDxH mm)
Ø 2,000mm. Total height: 7,750 mm

Description

Delmet Vertical pack Tower Fume Control Plant

The capacity of the system is 12,000 M3/HR or 7,000 CFM.
The fume extraction and scrubbing system is complete with range of polypropylene manifold ductwork and centrifugal fan.

This removal system has been designed to absorb fumes contained in the air coming from production areas where the pickling plant is situated. Pickling fumes are removed internally by a wet scrubber which utilizes re-circulating water. (H2O) Configuration of unit is of the packed static bed type, with PALL rings in PP packed into the column.

The scrubber is also fitted with pH control and acid neutraliser (NaOH) dosing system

The gas is introduced at the lower section, while the liquid is introduced at the top section though banks of spray nozzles.
During the process, the gas to be treated will initially bubble in the cleaning solution and then passes through the packed bed fed by a counter-flow of service water. The amount of re-circulated water in the column is regulated by a special valve. The gas passes through a drop separator situated at the top of the system (which traps any particles of re-circulated liquid carried by the flow of gas as it leaves the column) and is discharged into the atmosphere through the chimney.

Description of the main components

Compact Gas Scrubbing System constructed in Polypropylene (PP)
Complete with PP packing units, rings type PALL 50 mm., PVC drop separator, distribution ring (PVC) with plug proof nozzles (PVC) and miscellaneous accessories (water filler, ring filler and remover, overflow, analysis cell, etc.). The equalization basin (PP) is located at the base of the system for the recirculation solution, with a capacity equal to approximately 3,7 m3• The tank is also furnished with a liquid level gauge, composed of a 20 in U-PVC transparent tube, to control the liquid within the tank. The system is also equipped with a PP stack. 700 mm diameter
The system has the following characteristics:

No. of towers
1 tower in operation

Packing height 
2 at 3,60 metres
.
Type of packing
 PP rings 50 mm

Type of separator 
PVC drop stop 0 2.000

Unit Dimensions 
Diameter: 2.000mm. Total height: 7.750 mm.

Material of construction:
Isostatic PP 10 mm thick.

The tower extends to the bottom of the tank in order to create a "hydraulic seal''.

Vertical Pumps for the Recirculation of Scrubbing Solution

Complete with IP 55 motor, vapour and labyrinth seal, connecting flange having the following characteristics:

Type 
V3B2-150LV

Pump flow rate
25 m'/h

Pump head
10m. H20

Motor power supply
 4 Kw -230/400 Volt - IP 55 - 50 Hz -
ADPE - type MAK112MP2B14

Pump casing material
Polypropylene

Pump impeller material
Polypropylene

Matriculation
244091 - 244092

 

DESIGN DATA

Calculation Standards

Manufacturer's Standard

Fluid

Mains supply water

Density

Approx.l00kg 

Design pres.

250mm

Operating pres.

150mm

Test pres.

Full with water

Installation

Outdoor

Design temp.

40°c

Operating time.

Ambient

Useful capacity

3,70 m' ³

Total capacity

4,10 m' ³

Weight empty

1.230 kg.

Weight full

1.950 kg.

Weight full with water

5.650 kg.

Thickness bottoms (PP)

20mm.

Plating thickness (PP)

10mm.

Column thickness (PP)

10mm.

 

 

pdf icon Print / Download Delmet Vertical pack Tower Fume Control Plant Datasheet

Additional files

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.