skip to main content

Riley Surface World uses cookies to give you the best experience on our website. If you continue we assume that you consent to receive cookies on our website. Read More

X
Machines & equipment for sale

Babcock Wanson Thermal Fluid Heater

Direct From Site Clearance

Price [?]
Please call on +44 (0) 1922 45 8000
Part of a Direct Site Clearance
Alkaline Zinc Barrel and Rack Plating Line & Equipment at Bott Ltd
Condition
From a working environment, Good Condition
Location
Bude, Cornwall, UK
Add to Quote Book Appointment
Stock No
BOT275
Manufacturer
Babcock Wanson
Model
TPC 300LNV
Year of Manufacture
2000
Serial
00-39-2503
Condition
From a working environment, Good Condition
Other Info
360kw 3 Phase
Location
Bude, Cornwall, UK
External Dimensions (WxDxH mm)
1200 x 1700 x 2100

Description

Babcock Wanson 300LNV Thermal Fluid Heater

The following specification forms part of 

Alkaline Zinc Barrel and Rack Plating Facility comprising

The whole available for just £235,000 + VAT

To register an interest for the whole, or individual components, please contact Helen on +44 (0)1922 458000

This is a coil type heater with integrated gas.

The thermal fluid circulates in a coil, heated by the burner flame and its resulting combustion gases.

Output: 360 kW

Fuel: Natural Gas

Operating Principle

Thermal Fluid Heating is based on a similar principle to a simple hot water system. It consists of a heater connected to carbon steel flow and return pipework which can provide heat to one or more users or systems. Instead of water running through that pipework, a thermal fluid – typically specialist mineral oils or synthetic based fluids are suitable – is used as the heat transfer medium. Different fluids can be used to meet specific process heating requirements, making it a very flexible system.

Thermal fluid remains in a liquid phase throughout the complete operation and is able to achieve a temperature of up to 350 °C
The heat is transferred by turbulent liquid flow at the heat transfer surface.
The fluid then passes in a closed circuit back to the Thermal Fluid heater for reheating without further energy loss.

Advantages of Thermal Fluid Heaters

  • Easy Operation
  • No freezing hazard
  • No liquid effluent produced
  • No water treatment or chemicals required
  • Very low maintenance and very long plant life
  • Corrosion free
  • Closed circuit operation – no loss system
  • High combustion and plant efficiency
  • 20% to 50% less energy consumed to transfer the same amount of heat compared with steam
  • Lower total exhaust emissions
  • Very safe
  • Compact and requires no specialist site work, so can be sited close to the user, meaning substantial savings in specialist plant rooms and distribution pipe work
  • Ability to maintain constant temperature control
  • Ability to work at high temperatures (up to 350°C in standard form) in a simple closed loop
  • Cost effective

Wanson Spares Available

1 off Reconditioned Oil Pump Bearing Cartridge
1 off Fan Motor
1 off Burner Control
2 off Flame Striker Electrodes Riello 19814E
2 off Flame Failure Magic Eyes
1 Set Oil Pump Gaskets
1 off Valve Actuator
1 off New Coil Fitted 2009
1 off New CDX Tank Fitted 2012
1 Set Service Reports

pdf icon Print / Download Babcock Wanson Thermal Fluid Heater Datasheet

Additional files

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.