skip to main content

Riley Surface World uses cookies to give you the best experience on our website. If you continue we assume that you consent to receive cookies on our website. Read More

Machines & equipment for sale

GTech Electroplating Systems Chrome Plating Machine

Stock No
GTech Electroplating Systems
Chrome Plating
Year of Manufacture
Unused, Seen powered at RSW
Work Envelope (WxDxH mm)
700 x 650 x 700
Process Stages
Other Info
Qty 4 x Platinised Titanium Anodes
Our Central Warehouse, Aldridge, UK
Weight (kgs)
External Dimensions (WxDxH mm)
1600 x 1200 x 1150


This machine is available to purchase on its own, as listed below.
It is also available as a 5 Station Manual Plating Line
currently configured for Electroclean, Copper, Bright Nickel, Matt Nickel & Chromium plating.

Process: Chromium Electroplate

Tank nominal volume: 273 litres

1 Off Single compartment PVC tank of internal size 700 mm x 650 mm x 700 mm deep, complete with top flange.

External dimensions 1000 mm x 850 mm x 950 mm.

The body of the tank will be manufactured from 15 mm thick material.

Solution level will be 100 mm below the tank top flange.

The tank will be raised off the floor by integral support feet.

Tank will be supplied with:

  • 1 Off Ceramic heater rated at 2000 watts
  • 1 Set heater controls with digital thermostat, thermo-couple and plug.
  • 1 Set Anode and cathode rails manufactured in brass.
  • 4 Off Platinised titanium anode plates 200 mm x 600 mm.
  • 1 Off 750 amp X 15 V DC output rectifier for three phase AC supply.

Rectifier complete with remote control box incorporating LCD display of current, voltage, real time and ampere hours.

Typical Specification of Rectifier Equipment

  • Power factor> 0.85 at full load
  • Efficiency> 85% at full load
  • Phase number 1 or 3-Ripple factor 4-5%
  • Power control AYGÜN thyristor control
  • Control unit AYGÜN microprocessor control system
  • Operation Manual
  • Remote control operator panel Indicators, LCD display, current, voltage, time, ampere hour display
  • Measurement True RMS current-voltage measurement
  • Control accuracy verified with measuring instruments with 1% calibration report, measuring points for annual calibrations on the power board
  • Buttons on start / stop
  • Panel Process time 24/7 at full load
  • Type of cooling air cooled modular cabinet with galvanized body, electrostatic powder coated. Colour 7035
  • Assembly modular system realized using standard materials
  • Programs adjustable timer to work indefinitely There is a remote control panel with LCD screen Pc control RS232 / 485 wired serial communication with AYGÜN control software optional protection features -phase missing, - Overcurrent, -excessive heat, -short circuit, -diode and thyristor failure


pdf icon Print / Download GTech Electroplating Systems Chrome Plating Machine Datasheet

Additional files

Process Schedule


Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.