skip to main content

Riley Surface World uses cookies to give you the best experience on our website. If you continue we assume that you consent to receive cookies on our website. Read More

X
Machines & equipment for sale

Wheelabrator NEW SmartLine TV Vibratory Trough Machine

Stock No
VY1229J
Manufacturer
Wheelabrator
Model
TV 1950/650
Year of Manufacture
2019
Serial
20527 & 20612
Condition
Brand New, Unused, Current Model, Seen powered at RSW
Capacity
770 Litres (650 x 1950 x 600 mm)
Type
Trough with Enclosure
Other Info
Footprint 2900 x 2900 x 2900 mm
Location
Riley's RVA
Weight (kgs)
1520 Plus Enclosure
External Dimensions (WxDxH mm) [?]
2370 x 945 x 1270

Description

Large Components, No Problem

TV vibratory trough series offers the very highest specification including all key extras as standard

The Wheelabrator Vibro TV-1950/650 (770 litre) vibratory trough finishing machine is designed for a wide range of applications including large single items, prototypes, small batches, and/or components that must not contact each other in processing.

Fabricated from high quality steel for increase durability with weld and heat treated trough for reduced maintenance. The hot-moulded cast polyurethane lining assures the best protection for the inner chamber and the 6 Kw double flange drive motor is horizontally mounted and features long-life bearings for increase durability.

This style of machine is well suited for processing large Aerospace, Automotive, 3D Prototypes and castings, the trough can be split with the 3 ‘Easy move’ divider plates included to form 4 separate process chambers, so that crucial components don’t touch each other in process.

The full acoustic enclosure reduces the operating noise level significantly (reduction of up to 10dB depending on media selection and component/s) over a standard lid and features a reduced speed feature when opening the top inspection door, making it easier to remove the component/s as well as a reduction in the operating noise level is much appreciated by the operator. There is also a handy access door to the side of the enclosure to the drain plug/chute and where the divider plates can be stored when not in use. 

The touch screen control panel allows for simplified operator programming and assists in controlling the water flow and dosing from the CMS-80 water and compound metering system, which is located to the rear of the control panel on the freestanding steel frame. Frequency invertor provides variable speed control of the powerful 6 kW motor, which can be preprogramed or operated by the twist dial ranging between 870 – 1500 rpm. The machine can also be run in reverse as well as forwards, which provides varied media flow on the component/s and reduces wear and tear on the cast polyurethane lining.

Suitable for a wide range of applications including:

  • Deburring
  • Flash Removal
  • Polishing
  • Grinding
  • Smoothing
  • Superfinishing
  • Edge Breaking
  • Surface Blending
  • Pre-Anodised and Chemical Plate Finishes
  • Metallics, Ceramics and Additive Manufactured 3D Printed Prototype Components

Main Features:

  • 770 litre process chamber
  • Hot moulded cast polyurethane cast trough lining for inner chamber protection
  • Fabricated from high quality steel for increased durability
  • Oil and abrasion resistant lining
  • Forwards and reverse trough media flow settings assists in reduced lining wear
  • Welded and heated-treated trough for reduced maintenance
  • Touch screen control panel for simplified operation
  • Variable speed frequency invertor for optimum process control with quick turn speed dial
  • CMS-80 Meter Unit to ensure controlled delivery of water and liquid compound dosing
  • Full acoustic noise reduction enclosure with reduced speed on opening and side door
  • Compact equipment stand for control panel and metering station
  • 3 off ‘Easy move’ divider plates to create 4 separate compartments
  • Double flange drive 6 kW motor horizontally mounted with long-life bearings
  • Bottom side drains for efficient draining

 Included:

  • TV-1950/650 Vibratory trough finishing machine
  • Full acoustic enclosure with reduced speed opening
  • Touch screen control panel with variable speed dial
  • CMS-80 water and compound metering station
  • Freestanding control panel and metering station stand
  • 3 off Divider plates

 Technical Details:

  • 2019 machine – New in Crate
  • 770 Litre process chamber
  • Chamber length 1950mm x width 650mm
  • 6 kW drive motor (32 Amp)
  • Frequency Invertor - Variable Speed Drive 870 – 1500 rpm
  • 400v 3-Phase 5-Pin (3+N+E) socket
  • Theoretical maximum diagonal component dimension = 1900mm (Maximum recommended diagonal dimension 1750mm)

A large and versatile trough shaped finishing machine ideal for processing large single item, prototypes and smaller batches of oversized components that must not make contact.

** Video Disclaimer - Model shown is a smaller model than what is available. Video displays process only. Actual machine is Brand New and ready to be shipped **

pdf icon Print / Download Wheelabrator NEW SmartLine TV Vibratory Trough Machine Datasheet

Additional files

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.