skip to main content

Riley Surface World uses cookies to give you the best experience on our website. If you continue we assume that you consent to receive cookies on our website. Read More

Machines & equipment for sale

Fume Control plant & equipment

Direct From Site Clearance

Price [?]
Please call on +44 (0) 1922 45 8000
Part of a Direct Site Clearance
Twin Plating Lines and Support Equipment
Seen working by RSW, Excellent Condition
Whitstable, Kent, UK
Stock No
Year of Manufacture
Central Fan air replacement fan 09840
New or Used
Used (Second Hand)
Other Info
2nd centrifugal fan for air replacement
Whitstable, Kent, UK


** Price: Open to sensible offers **
** The owners relocation is nearing completion so they are now open to sensible offers. **

Fume Control plant & equipment with lip duct at tank extraction, twin centrifugal fume control fan sets and exhaust chimneys

  • Where indicated on the process schedule extracted tanks have integral hoods built into the rear of the tank with off takes to a low level header manifold running under each line.

  • The two manifolds rise at the end of each line (opposite end to control panel) and combine together before exiting the building in a single feed manifold to a centrifugal fan mounted on a support stand external to the building.

  • The extraction fan has a vertical discharge into an exhaust stack with high velocity efflux nozzle at a height of approximately 8 metres above ground level. 

  • The exhaust stack is supported by the same steel work as the extraction fan and is also fitted with guy wires for lateral stability.

  • A second centrifugal fan for air replacement purposes is floor mounted externally to the building adjacent to the extraction fan and this blows air back into the building via a high level manifold duct.

  • The air replacement fan is manufactured by Central Fans with serial number 09840.

  • In the case of both the fume extraction and air replacement systems the ductwork and manifolds are manufactured in corrosion resistant plastic material strengthened with external GRP.

  • A low pressure air blower is located external to the building, adjacent to the extraction fan and this is connected to the tanks requiring air agitation by a system of distribution pipework.


See details of the Two Manual Plating Lines  - MAR500 & 400

See Effluent treatment plant - MAR300

** Please note price displayed on listing MAR500 includes both lines, effluent treatment plant and fume control plant and equipment **

pdf icon Print / Download Fume Control plant & equipment Datasheet

Additional files

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.