skip to main content

Riley Surface World uses cookies to give you the best experience on our website. If you continue we assume that you consent to receive cookies on our website. Read More

Machines & equipment for sale

RS Treatments Heavy Duty Stainless Steel Wet Blast Machine

Stock No
RS Treatments
Barracuda 1100R
Year of Manufacture
New or Used
Work Envelope (WxDxH mm)
1100 x 880 x 950
Work Handling Method
Manual rotary table
Other Info
5 Year Cabinet Warranty
External Dimensions (WxDxH mm)
1200 x 1300 x 1900


Barracuda 1100R Wet blast Cabinet

The Barracuda 1100R wet blasting machine is designed  to simultaneously degrease and blast multiple components.

The process cleans by flow, and not impact, producing a 'soft' finish. The water acts as a lubricant, avoiding media impregnation and also extending the life of the blast media.

Barracuda wet blast cabinet used for the cleaning, degreasing and removal of debris from work pieces.

An all stainless steel constructed blast cabinet with an internally submersed glandless polyurethane pump and tungsten carbide tipped blast nozzle.

The pump bodies have been specially designed for minimal wear and longevity, due to the a combination of superior design and materials, reflecting the abrasive away from the surface thus drastically lengthening the life of the pump body.

In the unlikely event that the pump requires replacement, its price is a fraction of that normally charged

Typical process is as follows:

  1. The water/media slurry is contained within the wet blasting cabinet sump.
  2. Delivery of the slurry to the manual blast nozzle is via a glandless polyurethane pump and associated hose located inside the wet blasting machine.
  3. Compressed air is added at the blast nozzle to accelerate the slurry and create the cleaning effect.
  4. After contact with the component, the slurry then drains back into the sump creating a re-circulating system.


  • Water wash gun
  • Air blow off gun
  • Single right hand side door
  • Pressure gauge
  • Internal Light
  • Floor pedal gun actuation
  • 2.2kW media blast pump mounted directly into the sump
  • Tungsten carbide blast nozzle
  • 3kW thermostatically controlled sump water heater for cleaning applications
  • Front viewing window with internal wash/wipe

Service requirements.

  • Electrical supply 415v 3 Phase + Neutral 
  • Air supply 7 bar (100psi @ 40cfm)
  • Air operating range 2-6 bar (30-80psi) 
  • Water Supply 1/2" BSP
  • Drain Floor Level Approx 10 Litres/min 
  • Ventilation 4" / 110mm Duct to outside atmosphere.

pdf icon Print / Download RS Treatments Heavy Duty Stainless Steel Wet Blast Machine Datasheet

Additional files

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.