skip to main content

Riley Surface World uses cookies to give you the best experience on our website. If you continue we assume that you consent to receive cookies on our website. Read More

X
Machines & equipment for sale

Burntwood Engineering Spraybake Room

Direct From Site Clearance

Direct Site Clearance Price [?]
£ 10,000 (+ VAT)
Clearance ends
24 October 2019 17:00 GMT while stocks last
Decommissioning,
Moving & Loading Fee [?]
£ 3,500 (+ VAT) will be added to your invoice
Part of a Direct Site Clearance
Burntwood Engineering Baking / Spray Booth
Condition
From a working environment, Seen working by RSW
Location
Coventry, UK
Stock No
GY811J
Manufacturer
Burntwood Engineering
Model
Substantial Universal Demount-able Spray Bake Room
Year of Manufacture
1999
New or Used
Used (Second Hand)
Internal Size (WxDxH mm)
3900 x 6900 x 2600
Max Temp
80°c
Other Info
Hamworthy Superjet SG1 Gas Burner
Location
Coventry, UK
External Dimensions (WxDxH mm)
3900 x 7660 x 3000

Description

Layout
The booth is a rear extraction type spray booth that requires no additional ground works prior to installation. The machine is simply constructed on a smooth, flat concrete base with an extraction chest at the rear and plant work situated on top.

Construction
The spray booth cabin has a fire resistance rating of 30 minutes and is constructed using double skinned insulated panels with white polyester finish internally and externally.

Performance
The plant work is fitted with two 3.0kW direct drive bifurcated axial fans to achieve the design airflow rate of 14,000m3/hr. This provides a rate of 3.5 air changes per minute within the cabin, with extracted air being exhausted to atmosphere. The extraction system is fitted with two-stage filtration using 50mm EU2 green paint stop and EU3 blue pre-filters; this ensures that emissions meet EPA requirements. The input system uses high quality EU5 filter media to ensure incoming air is free of contaminants down to 10 microns.

Lighting
Includes a state-of-the-art LED lighting system specifically for use in our range of spraybooths that meet and surpass the very highest standards required in the automotive refinishing sector. The cabin is superbly lit with high level light pods which are angled to reduce glare and shadowing, these pods are outfitted with a state-of-the-art LED lighting system that gives illumination levels in excess of +1800 lux through the use high output LED SMD Chips designed to give colour temperature of 5000K @ 90CRI which offers unrivalled lighting quality when colour matching. These LED’s consume 50% less energy than conventional tubes with an equivalent light output and operate via an external low voltage driver at 36VDC. The lighting is fitted with a hi-tech laser etched ‘Luminit’ film which removes the visual appearance of each individual LED and creates a flat panel of light which is distributed and angled to prevent glare and shadowing.
The light pods are finished with a frameless toughened glass cover and intumescent seal to separate electronics from the booth atmosphere.

Spraying Cycle
Fresh air is drawn from the atmosphere & is heated to the required temperature. It then passes through EU5 ceiling filters into the booth & over the vehicle carrying away paint over-spray & vapours. The air is extracted via a twin dry filter system & exhausted to atmosphere. By using recommended filters with regular changes, 99% of pollutants can be captured.

Heating
The spray booth is fitted with a direct fired natural gas/ LPG burner with an output of 90- 110kW or 300,000 Stu’s/hr; a pneumatic changeover system allows the spraybooth to recirculate air within the cabin to rapidly reach low bake temperature.

Noise Levels
Comfortable working cabin levels of between 70-75 dB, variable speed motors contribute to 50% lower dB outbreak levels.

Main Doors
The main vehicle entry doors are a two leaf construction. Door Hinges have been designed specifically for application in spraybooths and are made through aluminium extrusion in a white powder coated finish, white plastic cover plates then cover the fixing bolts to complete the look of the hinge. A single individual fully enclosed locking mechanisms allows the doors to be locked internally and prevent main doors being opened during the spraying process. The door frame has a white powder coated finish and a built in rubber compression seal, each door has a large full length glass viewing panel framed in aluminium increasing internal booth visibility.

Personnel Door
A second personnel door can be fitted to any wall panel, generally to the rear of the cabin to provide a safe fire escape route. The door is fitted within its own white powder coated frame complete with self-closer, dictators, full length viewing window, extruded aluminium hinges and rubber compression seals.

Control Panel
The control panel is fitted with variable speed drives to electronically balance the cabin pressure and provides the operator with simple selection for spray & bake modes, automatic bake timer & cool-down facility, lighting control, temperature controller readout for spray and bake cycles, magnehelic pressure monitoring with positive pressure alarm, emergency pressure alarm and shutdown.

Inverter Variable Speed Drives
All Todd Engineering spraybooths are fited with Inverter varable speed drives to electronically balace cabin pressure, this is achived by controlling the fan speeds using the inverters. This method
of control is beneficial in maximising the energy efficiency of the spraybooth by only running the fans the speed required by the process. The inverters also increase the life expectancy and reduce maintenance of all associated components including the motor, drive shafts, and bearings thorugh controlled acceleration and decelleration of the motors, this also eliminates electrical surges as the spraybooth is started.

Standard Model Overall Dimensions (LxWxH) – Internal

6900mm x 3900mm x 2600mm

Standard Model Overall Dimensions (LxWxH) – External

7660mm x 3900mm x 3000mm

High Top LWB Model Overall Dimensions (LxWxH) – Internel

8900mm x 3900mm x 3300mm

High Top LWB Model Overall Dimension (LxWxH) – External

9810mm x 3900mm x 3700mm

Power Supply / Load

400VAC 3Ph/N/E (50/60Hz) / 32A

Maximum Absorbed Power

8kW

Gas Supply

Natural Gas or LPG

Gas Rated Power (kW/BTU’S)

110kW/300,000BTU’s/hr

Natural Gas Consumption

9m³/hr

LPG Consumption

5.5kg/hr

Pneumatic Supply

5 bar

Airflow

14,000m³/hr

Extraction Type

Rear Extraction

Fan Type / Rated Power

Bifurcated Axial / 3kW

Inverter Variable Speed Drives

Yes

LED Lighting

Yes – 5000K/90CRI/+1800lux

 

** Available at reduced direct from site price for a limited time only **

 



pdf icon Print / Download Burntwood Engineering Spraybake Room Datasheet

Additional files

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.