skip to main content

Riley Surface World uses cookies to give you the best experience on our website. If you continue we assume that you consent to receive cookies on our website. Read More

Machines & equipment for sale

Guyson International Marr-Line 2STG

Special Offer

Refurbished Price [?]
£ 11,950 (+ VAT)
Special Price (refurbished) [?]
£ 9,950 (+ VAT)
Special Price (sold as seen) [?]
£ 7,750 (+ VAT). Available for immediate collection.
Special offer ends
23 January 2020 16:00 GMT while stocks last
Stock No
Guyson International
Work Envelope (WxDxH mm)
410 X 2500 X 210
Process Stages
Other Info
With fitted air knife blades
Our Central Warehouse, Aldridge, UK
External Dimensions (WxDxH mm)
1600 X 4280 X 2100


The Guyson Marr-Line conveyorised wash system provides the very latest in safe aqueous technologies, ideally suitable to incorporate into a modern cellular work flow environment.

The Marr-Line conveyorised multi-stage wash system covers a wide variety of production orientated washing, cleaning, degreasing, drying and coating applications.

The 2 stage wash and dry specification includes a standard conveyor width of 400 mm, with a nominal tunnel height of 200 mm. This particular build includes an intermediate air knife blow off section between the wash and dry to maximise the drying capability and save on lost solution.

Since heightened awareness of safe aqueous industrial cleaning was introduced by the Montreal Protocol (to eliminate the use of substances that depleted the ozone layer), and with the recent introduction of the ‘Solvent Emissions Directive' or SED (replacing environment damaging solvents), it now makes even more sense to look at how you could introduce a Guyson Marr-Line aqueous cleaning system into your cleaning regime.

High flow spray jets deliver maximum power in the wash section with a 360° spray pattern, driven through a stainless pump, twin bypass filters and pipework. 

Full stainless construction throughout ensures that your Marr-Line will remain corrosion free throughout its life cycle and allows the use of a wide range of chemistry and treatments to be used within the machine.

All heated tanks are fully lagged for maximum heat conservation and have an automatic water fill system that allows for continuous running. Low water level sensors will switch off the machine, safeguarding the equipment in the event of auto-fill failure.

The belt drive system is fitted with both a variable speed inverter and an index drive allowing the machine to be tailored to control the wash cycle and the type of components passing through it. 

Component drying is an important consideration

The machine is fitted with an intermediate air knife blow off and drying chamber that is an in line re-circulating hot air oven used as the final stage and this will usually be able to evaporate the final moisture residue before the component moves to the end of the conveyor.

Tote Bin Washing

Numerous Marr-Line conveyorised wash and dry systems have been purchased for washing reusable tote bins and trays. These are thoroughly cleaned and dried, getting rid of production stains, oils, contaminants, and odours leaving them directly ready for reuse. 


  • Marr-Line model 400/200
  • Machine dimensions(mm) 2 -Stage (Wash and Dry) system 1600 X 4280 X 2100 mm
  • Component Entry & Exit 400 x 200 mm
  • Feed Height from Floor Level H 1090
  • Maximum Conveyor Load kg 50
  • Throughput/Speed (variable) max/mm/min 750


  • Tank Capacity Litres 220
  • Temperature °C 40-75
  • Pump Capacity L/min 100
  • Pump kW 1.5
  • Pump Pressure bar 4
  • Heater Capacity kW @415V 24


  • In-Line Fine Filter micron 200
  • Tank Basket Filter micron 850

Oven blow off

  • Temperature Max °C 110
  • Heater kW @415V 12
  • Fan kW @415V 1.1
  • Air Flow m3/min 28

Oil coalescing filter

  • Free standing with pumped return (860 X 320 X 860 mm)

Electrical details

  • 400v / 50Hz / 3ph
  • Max FLC 63 A
  • Max motor amps - 11.5 A

pdf icon Print / Download Guyson International Marr-Line 2STG Datasheet

Additional files

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.