skip to main content
Machines & equipment for sale

ACCU-CAL™ 50 Radiometer - UV Intensity Meter

Stock No
NAB964
New or Used
Used (Second Hand)
Location
Our Central Warehouse, Aldridge, UK

Description

ACCU-CAL™ 50 Radiometer - UV Intensity Meter

for use with UV Spot Lamps & UV Flood Lamps  CE Marked

The ACCU-CAL™ 50 radiometer UV intensity meter is a simple-to-operate device that measures UV-A (320-390nm) intensity and dose (energy). Degradation of UV curing bulbs, lightguides, and reflectors can significantly reduce intensity, resulting in incomplete cures.

The ACCU-CAL™ 50 allows operators to validate, monitor, and document a UV curing process. A low intensity measurement signals an operator to replace the bulb, lightguide, or reflector. The ACCU-CAL™ 50 can also be used to confirm that operators are properly shielded from UV exposure.

ACCU-CAL™ 50 Radiometer Specifications
Spectral Sensitivity320 to 395 nm
Intensity Range1 mW/cm2 to 40 W/cm2
ResolutionIntensity (1 mW/cm2; to three significant digits)
Dose (1 mJ/cm2)
Calibration Period12 months
Operating Temperature RangesOptometer: +5 to +40°C
Detector: 120°C continuous, Peak 200°C
Measurement ModesIntensity (mW/cm2 and W/cm2)
Peak Intensity (mW/cm2 and W/cm2)
Dose (J/cm2)
Light SourcesLightguides (3 mm, 5 mm, and 8 mm) Floods/Conveyors
Power SupplyTwo (2) AA batteries
Battery Life250 hours (automatic shutoff after 1 hour)
Sensor DimensionsPhoto-Sensor Diameter = 9 mm
Diameter = 37 mm
Thickness = 8 mm
Cable Length = 1 M
Meter Dimensions120 mm (Length) x 65 mm (Width) x 23 mm (Thickness)

pdf icon Print / Download ACCU-CAL™ 50 Radiometer - UV Intensity Meter Datasheet

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.