skip to main content

Riley Surface World uses cookies to give you the best experience on our website. If you continue we assume that you consent to receive cookies on our website. Read More

X
Machines & equipment for sale

STS CO2 Fire Suppression Cabinet

Used / Second Hand

Sold As Seen Price [?]
£ Login or Register for price
Availability:
In stock now
Stock No
GW072S
Model
STS BRANDSHUTZ
Year of Manufacture
2002
New or Used
Used (Second Hand)
Location
Our Central Warehouse, Aldridge, UK
External Dimensions (WxDxH mm)
600 X 400 X 2200

Description

STS CO2 Fire Suppression Cabinet With fire eye safety detection and CO² fire suppression injection system  

  • High flow cylinder valve
  • Automatic or manual operation
  • Pilot cylinder acting solenoid operating system


The extinguishing of fires using carbon dioxide was developed over 80 years ago. Accumulated experience gained through thousands of installations in power plants, industrial plants, oil refineries, electronic processes, on ships and in a wide variety of hazardous areas

CO2 is versatile

The CO2 is stored as liquid, under pressure. The liquid CO2 flows through discharge pipework to specially designed nozzles when a system is activated.

The liquid vaporises rapidly during the discharge due to the agent’s low boiling point. This results in a penetrative three-dimensional action.

Fires that have been burning in even in the most inaccessible areas are not a problem, as the rapid expansion of the gaseous agent allows fires to be targeted in these areas.

Fire is extinguished by reducing the oxygen level in the risk area to the point where combustion cannot be sustained. 

The secondary action of this agent is cooling. Cooling is used in local applications where the liquid phase of the discharge is applied directly to the fire and risk materials.

CO2 is fast and efficient

High mass flow rates are achieved as the High Pressure CO2 system uses large bore cylinder valves.

The system reacts within the first few seconds of a fire. This feature can make the difference between a nuisance and a disaster. The fast action of the control system and valve enables this to happen.

CO2 is clean

CO2 is one of the most familiar of all gases and is a colourless, odourless, dry, inert gas.

Carbon Dioxide vapourises fully leaving no residue after extinguishing a fire. It is non-corrosive and will not contaminate foodstuffs.

There is no mess after this product is deployed, there is nothing to clear up and no water damage. 

Carbon Dioxide can be used on energised electrical equipment as it is also non-conductive.

Fire Protection for Electrostatic Powder Spray Coating Facilities

Applications in:

  • automatic and manual powder spray coating facilities
  • plants with open and closed filters and cyclone recovery plants


Basis of the Fire-protection Installation:

  • EN 50177
  • EN 12981 Fire Protection is Safety category 3   acc. to EN13849-1:2007-07
  • BGI 764 


Earthing control device for workpieces

  • EN 50177 5.5.2 & 5.5.3 

pdf icon Print / Download STS CO2 Fire Suppression Cabinet Datasheet

Additional files

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.