skip to main content
Machines & equipment for sale

Power Feed Pillar Drill Press

Stock No
PER768
Model
Drill Press
New or Used
Used (Second Hand)
Location
Our Central Warehouse, Aldridge, UK
External Dimensions (WxDxH mm)
500 x 1100 x 2400

Description

Drill Press  Variable Speed Pillar drill, Auto feed and Auto reverse for tapping 

A must for any fabrication shop that requires accurate drilling and tapping facilities.

The direct drive driven head allows for variable spindle speed from 96 to 3000rpm. Tools that run at correct speeds last much longer. 

This variable speed machine has manual and a power feed system.

The inbuilt tapping facility has a variable depth setting which can be set so when the spindle reaches the depth stop, the motor and spindle reverse direction to unwind a tap from a hole.

The base and table are made from a very rigid casting adding to the strength of this 38mm maximum capacity drilling machine.

Specifications

  • Industrial quality 38mm capacity drill press,
  • Variable speed spindle
  • Utilisies a No. 4 Morse Taper spindle taper
  • Auto reverse tapping feature
  • Manual feed 
  • Auto feed
  • Variable height table 
  • 300 x 400 table area with "T" slots
  • Integrated coolant system
  • Tapping mode 
  • Adjustable quill position
  • Machine vice
  • Machine light

pdf icon Print / Download Power Feed Pillar Drill Press Datasheet

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.