skip to main content
Machines & equipment for sale

Rosand Instrumented Falling Weight Impact Tester Type 5 -HV

Stock No
PER739
Model
Type 5
Serial
9043123
New or Used
Used (Second Hand)
Process Application
Materials testing
Location
Melton Mowbray, Leicestershire, UK
External Dimensions (WxDxH mm)
1500 x 770 x 3300

Description

Impact testing today constitutes an important end product and fit for purpose test.

Following manufacture many products will experience some form of service impact specific to their environment, it is the aim of the impact tester to replicate these service impacts in order to assess their fitness for purpose.

Impact testing is generally governed by standards which cater for a wide range of materials including:

  • Polymers
  • Polymer Composites
  • Metals
  • Ceramics

Testing to the following Plaque and Film standards

A specialised Film Anvil and a Charpy Striker/Mass Assembly

  • ISO 6603 - Determination of Multi-axial Impact Behaviour by the Instrumented Puncture Test (plaque thickness-1 to 4mm). Geometry: 40mm anvil and clamp, 20mm hemispherical striker
  • BSI 2782 part 3 method 352D - Determination of Falling Weight Impact Resistance of thin Flexible Sheet. Geometry: 127mm diameter anvil/clamp, 38mm hemispherical striker
  • ISO 179-2:1999 - Plastics, determination of Charpy Impact strength
  • ASTM D3763 - Standard Test Method for High Speed Puncture Properties of Plastics using Load and Displacement Sensors. Geometry: 3" diameter anvil/clamp; ½" hemispherical striker Geometry: Charpy & Izod
  • DIN 53373 - Testing of Plastic Films Impact Penetration Test with Electronic Data Recording Geometry: 40mm diameter anvil/clamp, 20mm hemispherical striker
  • ISO 7765 - Determination of Impact Resistance by the Free-Falling Dart Method (film/plaque thickness up to 1mm) Geometry: 40mm anvil and clamp, 20mm hemispherical striker
  • General sub-assembly impact testing - geometry subject to sub-assembly dimension, may require specific jig and/or fixture. Barely Visible Impact Damage (BVID); low energy, non-penetrative test aiming to replicate de-lamination in composite materials Facility

pdf icon Print / Download Rosand Instrumented Falling Weight Impact Tester Type 5 -HV Datasheet

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.