skip to main content
Machines & equipment for sale

Mils Evisa Vacuum Degassing System

Direct From Site Clearance

Offers invited over [?]
£ 1,050 (+ VAT)
Clearance ends
08 May 2017 14:00 GMT while stocks last
Part of a Direct Site Clearance
Pera Technology - Phase 1
Melton Mowbray, Leicestershire, UK
Stock No
Year of Manufacture
New or Used
Used (Second Hand)
28 m3/h
Process Application
Removing bubbles from liquids
Other Info
0.75kW 1.5m bar
Melton Mowbray, Leicestershire, UK


Vacuum Chamber

Vacuum Chamber For Degassing Resins, Liquid Rubbers and Liquid Plastics.

vacuum chamber and vacuum pump that pulls 29 inches of mercury are used to remove the air from high viscosity materials like silicone rubber before pouring. They are also ideal for vacuum degassing liquid plastics for making bubble free castings.

This easy to use vacuum chamber is made from aluminium with an acrylic lid which features a rubber gasket that creates a positive, air tight seal for maximum vacuum.

The vacuum pump is run through a receiver meaning the vacuum chamber can be instantly drawn down to the required vacuum level.

Inside dimension of vacuum chamber; 280 Ø x 315

Includes hose. Easy to read gauge let's you know if your vacuum pump is pulling the required level of mercury.

Vacuum pump

Evisa E25 HV

  • Nominal Capacity: 30 m3/h
  • Pneurop Capacity: 28  m3/h
  • Final vacuum without Gas Ballast: 0.5 mbar (abs)
  • Final vacuum with Gas Ballast: 1.5 mbar (abs)
  • Motor Power: 0.75 kW
  • Rotation speed (50 Hz): 1435 rpm
  • Noise level: 60 dB(A)
  • Oil filling: 1.5 dm3
  • Weight: 39 kg
  • Vacuum-Flange: 1"
  • Vacuum pump + Davies metcalf 1979 150psi
  • Vacuum chamber 280 Ø x 315
  • pump 300 x 300 x 300
  • Receiver 1100 x Ø 300 

pdf icon Print / Download Mils Evisa Vacuum Degassing System Datasheet

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.