skip to main content
Machines & equipment for sale

Cannon Shelley Vacuum Thermo Forming Press

Direct From Site Clearance

Offers invited over [?]
£ 31,500 (+ VAT)
Clearance ends
08 May 2017 14:00 GMT while stocks last
Part of a Direct Site Clearance
Pera Technology - Phase 1
Location
Melton Mowbray, Leicestershire, UK
Stock No
PER717
Model
PF1510
Serial
1910
New or Used
Used (Second Hand)
Work Envelope (WxDxH mm)
Capacity: 1500 x 1000 mm
Other Info
Capacity: 1500 x 1000 mm
Location
Melton Mowbray, Leicestershire, UK
Weight (kgs)
4800
External Dimensions (WxDxH mm)
See below

Description

Cannon Shelley PF1510 Vacuum Thermo Forming Press

Thermoplastic vacuum forming is a technique for transforming flat plastic into a three dimensional shapes using a mould tools. Sheet plastic is heated to make the plastic malleable, following this the plastic is stretched over the mould tool and a vacuum is created as air is removed from the machine. The atmospheric pressure around the tool forces the plastic to cast itself upon the tool producing the plastic silhouette

This thermo-forming press was fully refurbished approximately 4 years ago for a development project of microwave technology pre heating of the thermoforming sheets to plasticise them prior to entering the press to vastly reduce the cycle times. (See lot PER730 )

Once the development work was proven the press was surplus to requirements and has only worked a few hours since the refurbishment programme.

Specifications

Maximum Aperture Size: 1460 mm x 960 mm

Maximum depth of product using upper heater

Using Lower Heater: 600 mm

Upper Heater Element Type: Ceramic Element Size: 244 mm x 60 mm Element Controller: VME Element Zone Arrangement: Pairs Movement: Cylinder

Lower Heater: Element Type: Ceramic Element Size: 244 mm x 60 mm Element Controller: VME Element Zone Arrangement: Pairs Movement:

Cylinder Clamp Frame: Vertical LiftCooling Fans : 3Control System: Automata Type: VMEDrape Mechanism: Inverted Cylinder Rack

Full set of manuals 

Simatic protool V6.0+ service pack 2

Dimensions

  • Load station with light-guard 3000 x 1200 
  • Main Machine 2500 x 3200 x 4100
  • Control Panel 900 x 800 x 2100


pdf icon Print / Download Cannon Shelley Vacuum Thermo Forming Press Datasheet

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.