skip to main content
Machines & equipment for sale

Nederman Mobile Extraction Unit For Hot dusts

Stock No
New or Used
Used (Second Hand)
Approx Duty CFM / M³/Hr
1200 // 1800
Filter Area ft² / m²
Other Info
220-230 volt / 50hz / 1200w
Melton Mowbray, Leicestershire, UK
External Dimensions (WxDxH mm)
1300 x 750 x 1000


Extraction at source

Extraction at source is the most effective way to collect and remove, hot dusts with sparks . The most effective solution for your workplace for application such as fettling, flame cutting, grinding and thermal spraying.

The portable extractor's patented design ensures optimum fume and dust capturing capacity and manoeuvrability.

The extraction arm and hood has an integrated easy-to-reach damper to control the suction rate. The extractor is mounted by a swivel, which allows the product to rotate 360 degrees. This makes the extraction arm flexible in all directions and very simple to position.

The whole unit is mounted on wheel and can easily be moved to where the work is being done.

The extracted hot dusts are drawn down the flexible duct and impinged on a bed of water contained within the units sump. The water bed will then extinguish any sparks and also collect the dust within the water bed for later disposal.

Arm dimensions

  • 1850 mm Arm folded
  • 2000 mm Arm extended


pdf icon Print / Download Nederman Mobile Extraction Unit For Hot dusts Datasheet

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.