Wheelabrator Clean-Tek F650 Front Loading Parts Wash Tank
- Stock No
- Year of Manufacture
- New or Used
- Used (Second Hand)
- Work Envelope (WxDxH mm)
- 460 x 330 x 220 mm ( 2 x baskets)
- Process Stages
- Other Info
- Ex Rolls Royce Machine.
- Our Central Warehouse, Aldridge, UK
- External Dimensions (WxDxH mm)
- 1750 x 2000 x 2500
The Clean-tek F650/4 is a robust, durable and reliable heavy duty cabinet type multistage front loading spray wash machine.
The design was brought about by the need of modern industries increasing demand for efficient component cleaning whilst remaining ergonomic and safe, eliminating environmental and operating hazards normally associated with solvent cleaning systems.
Made from 3mm stainless steel with a double skin construction, these machines whole structure is supported by 50mm square, rigid box section frame.
They come fitted with high specification pumps, larger fluid tanks and increased fluid heating capacities, making them able to achieve even higher standards of cleaning well as greatly reducing the overall wash cycle times.
Suitable for use with safe, low cost, water based biodegradable detergents, these machines are capable of processing both light and heavy deposits of coolant, oil, grease, carbon deposits, and solid particles from a multitude of large, heavy and awkward components, quickly and efficiently.
The machine has been further designed to offer an oscillating basket movement to ensure the spray heads reach all area's of the dual basket system. The dual basket system itself is also adaptable and removable allowing a single larger basket or dedication fixture to be utilised.
The 4 stage machine offers hot detergent wash, cold rinse cycle, hot rinse cycle and hot air drying and any combination of stages you require. With the 3 wet stages other process can be achieved such as iron phosphate conversion coatings.
Any oil that is washed off is removed from the solution storage tanks by means of a large disc skimmer and then the solution is polished with the large candle stick cartridge filter to maintain the solutions in an optimum state.
Steam generated in the wash cycles is extracted from the work chamber via an FX400o condensing fan which returns the condense back to the wash tank, protecting the surrounding area from water damage.
Included is an optional pump effluent facility to assist in the removal of spent solutions to your effluent collection point.
- Fluid tank liquid volume: Hot wash 155ltr, Cold rinse 100ltr, Hot rinse 155ltr
- Fluid tank heater capacity: Hot wash 12kW, Hot rinse 12kW
- Dryer Capacity: 12kW
- Component basket dimensions: 460 x 330 x 220 mm ( 2 x baskets)
- Load capacity 100kg
- Wash pump 1.5kW
- Wash pump flow rate 100l/min
- Wash pump pressure 1 bar
- Cold rinse pump .37kW
- Cold rinse pump flow rate 50l/min
- Cold rinse pump pressure 1 bar
- Hot rinse pump .9kW
- Hot rinse pump flow rate 100l/min
- Hot rinse pump pressure 2 bar
Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.
Machines & equipment for sale
- Surface Treatment
- Cleaning & Degreasing
- Polishing & Belt Linishing
- Mass Finishing
- Ovens & Furnaces
- Process Cooling
- Shot Blasting
- Dust & Fume Extraction
- Air Compressors
- Rectifiers & Transformers
- Latest Stock
- Special Offers
- Direct From Site Clearances
- Brand New Machines
- Available Immediately
- Sell Your Machine
Get the latest machines emailed directly to you as they become available to buy online sign up