skip to main content
Machines & equipment for sale

Nederman Airmaster Auto M90E/11 Air Filter Unit

Stock No
AUTO M90E 11.0
New or Used
Used (Second Hand)
Approx Duty CFM / M³/Hr
5000 // 8500
Filter Area ft² / m²
900 // 90
Other Info
Outdoor Suited Unit
Our Central Warehouse, Aldridge, UK
External Dimensions (WxDxH mm)
3730 x 1300 x 4220


The AUTO M90E 11kW dry dust extractor is ideal for either singular large installations or as a centralised dust collector for numerous smaller ones. 


The filter body, with full width opening front access doors, is fitted with multi vee-pocket filter bags secured by a clamping frame at its lower end. The upper end of the bag is suspended from a frame, which can pivot about its central axis. This is in turn linked by a connecting rods to the shaker motors, located on the units top section.

The filter body is mounted on the pre separation knock down section which in turn is on top of the steel hoppers. The hoppers are fitted with a quick release bin mechanisms and a tripple steel Bins of 75 l capacity. 

The inlet manifold can be mounted to either the rear or right and left hand sides.


During normal operation

1. During normal operation, the dust laden air from the plant travels down the supply duct
2. The standard baffle is mounted at the inlet of the filter to break up the air flow and direct the dust downward into the hopper section while protecting the filter media from abrasive dust.
3. The lighter dust collects on the inside of the envelope bag as clean air passes through. Finally, the clean air travels through the air handling fan where it could be returned to the plant.
4. The heavier dust settles in the hopper section where it can be discharged into the metal bins.


415 volts
50 Hz
12.5 Amps
3 phase
Inlets diameter 470 mm

pdf icon Print / Download Nederman Airmaster Auto M90E/11 Air Filter Unit Datasheet

Additional files

Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.