The Marketplace for Surface Technology. New and Used Process Equipment & Machinery.

Stock regularly updated - Sign up to stock alerts here

Fischerscope H100 Micro Hardness Tester

Fisher H100 Micro Hardness Tester

The Fischerscope HA 100 V-B measures ultra-low hardness under test load. With a load range of 0.4 mN to 1,000 mN and test uncertainties below 1 percent, it provides maximum sensitivity over a wide range of materials and coatings. It also eliminates the need for overcoating of the test sample. Measurements can be taken with the coating or plating in place, and the results are unaffected by substrate material. The system can be used on virtually any thin coatings (from very soft elastomers to ultra-hard tool-coating materials) and on uncoated materials. With the Fischerscope H100, operators can control the load and indentor penetration such that the effects of the material substrate on measurement results can be virtually eliminated. The very light loads also provide a nearly nondestructive test, which allows the sample material to be used again in later tests.