The Marketplace for NEW and USED Surface Finishing Plant & Equipment
The Marketplace for NEW and USED Surface Finishing Plant & Equipment
Home > Surface Treatment Process Plant & Equipment > Powder coating, wet paint plant & equipment >
CAPACITY: 1 Flight bar completed every 55 seconds,
Plant was originally configured for 2 colours and can be reinstated if required. The plant includes a Hytrack conveyor system which can run separately to main E coat paint conveyor, so they can index without the main plant conveyor. The only programming required is within the storage centres on the Hytrack conveyor loader (3 centres) which also incorporates a pick and place loader un-loader.
Once the load centres are physically loaded with work for the shift, and the correct program set from day before the plant with then operate automatically.
The Oven is a double pass at 190C stoving temperature, air circulated, then the conveyor finally returns to the unload stage. Also included are 2 x Demin Storage Tanks and 1 x Mains process Water Storage break tank.
There are a range of spares available including a Main Paint Pump, New Ultra Filter x 1 Koch Filter and also effluent and transfer pumps.
Print / Download Barlow Whitney Automated Electro Paint Plant Datasheet
Forward this machine to a colleague
Add to your personal brochure: Login or Register
Comprehensive control panel
Part of the Hytrack conveyor System
Flight Bar indexing on Conveyor System
Effluent pH Correction tank and control Panel
PHOTOGRAPHS TAKEN PRIOR TO REFURBISHMENT.
